Võrguseadmed

Kogu kodu hõlmav võrk kuni 400 m2; WiFi 6 kiirus kuni 3000 Mbps; 2 x 2,5 mm ja 2 x gigabaidise Etherneti porti; Toetab WPA3 turvalisust; Cudy Meshiga ühilduv

D-LINK Wi-Fi 7 BE3600 Mesh Router

VIOFO A229 ULTRA 2CH

• Must • Videopordi tüüp: HDMI • 8K Ultra HD 7680 x 4320 pikslit • Korpuse materjal: Polükarbonaat • USB ATEN VS5821-AT, 7680 x 4320 pikslit, 8K Ultra HD, Must

• Juhitav L2 Veebipõhine haldus • Teenusekvaliteedi (QoS) tugi Asukoha seadete konfigureerimine (CLI) • Konsooli port: RJ-45 • 10G-tugi • MAC-aadresside tabel: 16000 sisestust Lülitusvõime: 128 Gbit/s • Pääsuloend (ACL) • Püstikmontaaž Virnastatav • Vahelduvvool D-Link DGS-1530-28S/E, Juhitav, L2, Täisdupleks, Püstikmontaaž

The Device is a layer-2 commercial switch. It has a high-performance switching engine and a large buffer memory to ensure smooth video stream transmission. With a full-metal and fanless design, the Device features great heat dissipation capability on the shell surface. The Device is an unmanaged switch, so it does not need to be configured through web interface, which simplifies installation. Plug and Play Hassle-free, it does not require any configuration. Simply use after it is powered on. Full Line-rate Forwarding The ports perform error-free forwarding of frames at high speeds while under a full load. Easy Installation Supports desktop, rack mounting and wall mounting, suitable for various scenarios. Flexible Application Suitable for use in a wide variety of scenes to meet your requirements. Port Isolation Devices under different ports are prevented from communicating with each other, without need of VLAN being configured. Data is also protected from being leaked from the PoE ports and broadcast storms are isolated, making the network safe and easy to use. Link Aggregation Combines multiple physical links into one virtual channel for dynamic redundancy and load balancing, ensuring that the connection remains stable. 24 × RJ-45 10/100/1000 ports The all-gigabit ports transmit data without lag Features aggregation mode which aggregates uplink ports Features isolation mode which isolates all the ports from each other With its solid full metal design, the device has great heat dissipation and no fan Supports rack mount, wall mount and desktop mount

• Multi-Gigabit access switch with 16x 1 Gigabit Ethernet ports, 8x 10G multi-Gigabit Ethernet ports, and 2x 25G SFP28 uplink ports • PoE support as per IEEE 802.3at (1G ports) and IEEE 802.3bt PD-Type 4 (10G ports) with up to 720 watts PoE budget • Non-stop PoE function – continuous supply of connected PoE devices in the event of a software update • IEEE 802.3az power saving feature – port deactivation when not transferring data • Ideal in combination with Wi-Fi 7 access points • Basic layer 3 features such as static routing and DHCP server • Security with configurable access control on all ports as per IEEE 802.1X and access control lists • Secure remote management through TACACS+, SSH, SSL, and SNMPv3 • Cloud-managed LAN for fast configuration and convenient management via the LMC • IPv6 and IPv4 support for modern enterprise networks • 5-year replacement service for all components

• Offers comprehensive connectivity with 8 10/100/1000Base-T RJ45, 8 100/1000Base-X SFP ports and 4 1G/2.5GBase-X SFP ports. • Ensures reliable operation with redundant 12-75V DC power supply, advanced surge protection (6KV), and ESD protection (Air-15kV, Contact-8kV). • Designed for harsh environments with fanless IP40 Din-rail enclosure and wide operating temperature range (-40°C to +80°C). • Delivers uninterrupted operation through G.8032 ERPS protocol with

• Managed L2+ Web-based management • Quality of Service (QoS) support Configuring Location Settings (CLI) • Basic switching RJ-45 Ethernet ports quantity: 8 Console port: RJ-45 • 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X • MAC address table: 16000 entries Switching capacity: 26 Gbit/s • Access Control List (ACL) • DC

• Offers comprehensive connectivity with 8 10/100/1000Base-T RJ45, 8 100/1000Base-X SFP ports and 4 1G/2.5G/10GBase-X SFP+ ports. • Ensures reliable operation with redundant 12-75V DC power supply, advanced surge protection (6KV), and ESD protection (Air-15kV, Contact-8kV). • Designed for harsh environments with fanless IP40 Din-rail enclosure and wide operating temperature range (-40°C to +80°C). • Delivers uninterrupted operation through G.8032 ERPS protocol with

• Managed L3 Web-based management • Quality of Service (QoS) support • Console port: RJ-45 • MAC address table: 128000 entries Switching capacity: 880 Gbit/s Multicast traffic suppression • Access Control List (ACL) • Rack mounting • AC Power supply included

• 24 10/100/1000Base-T RJ45 PoE ports and 4 1G/2.5G/10GBase-X SFP+ slots • Total PoE power budget: 370W, up to 90W per port (Ports 1~2 90W per port, Ports 3~24 30W per port) • IEEE 802.3af/at/bt PoE compliant to simplify deployment and installation • Ensures uninterrupted operation with redundant DC power supply, advanced surge protection (6KV), and ESD protection (Air-15kV, Contact-8kV) • Delivers high availability through G.8032 ERPS protocol with

• Multi-Gig 10G Edge: 4 x 100M/1G/2.5G/5G/10G RJ45 and 4 x 1G/2.5G/10G SFP+ ports for flexible copper and fiber access or uplinks • High Throughput: 160 Gbps non-blocking switching capacity and 119.04 Mpps forwarding for true wire-speed on all ports • Advanced L3 Routing: Supports IPv4/IPv6 static routes, RIP v1/v2, OSPF v2 and BGP-4 for dynamic, scalable inter-VLAN and WAN routing • Granular Segmentation: Up to 4K 802.1Q VLANs with QinQ, private, voice, guest and subnet-based VLAN options for fine-grained traffic separation • Enterprise-Grade Security: 802.1X authentication, ACLs, MAC/port limiting and DoS protection to defend against unauthorized access and attacks • Service-Aware QoS: Eight hardware queues per port with SP, WRR and WDRR scheduling to prioritize voice, video and business-critical traffic • Resilient Uplinks: LACP/static link aggregation, MSTP and ERPS ring support deliver load balancing and sub-second failover • Comprehensive Management: Web GUI, console/Telnet/SSH, HTTPS/SSL, SNMP v1/v2c/v3, Syslog and FTP/TFTP for easy deployment and monitoring • Ideal For: SMB cores, high-performance workgroups and edge aggregation needing cost-effective 10G Layer 3 switching

Ruijie lüliti mittehallatav 8xGb RJ45, terasest korpus

• 8 x 2.5G ports • 1 x 10G SFP+ port • Hardened IP50 rated metal switch • Extreme -40° – 75° C (-40° – 167° F) operating temperature range • Redundant power inputs with overload current protection • Alarm output triggered by power failure • 60Gbps switching capacity • Includes DIN-Rail and wall mounts • Power supply sold separately (models: TI-M6024, 48VDC3000) • NDAA / TAA compliant (U.S. and Canada only)

• Juhitav L2 Veebipõhine haldus • Teenusekvaliteedi (QoS) tugi • RJ-45 Etherneti ühenduse pesade arv: 5 • 10BASE-T, 100BASE-T, 1000BASE-T • MAC-aadresside tabel: 4000 sisestust Lülitusvõime: 10 Gbit/s • Lauaarvuti • Vahelduvvool Kaasas toiteplokk Zyxel GS1200-5V3, Juhitav, L2, Gigabit Ethernet (10/100/1000), Täisdupleks, Lauaarvuti

Cable, Length 3m

Die PCI Express Karte von Delock bietet zwei Netzwerkanschlüsse mit einer Übertragungsrate von bis zu 1000 Mbit/s. Die PCIe > 2 x Gigabit LAN Karte unterstützt Wake On LAN (WOL), 9k Jumbo Frames und PXE.

• Multi-Gigabit Ethernet copper SFP module • Up to 10 Gbps link speed • Cable length up to 30 m when using CAT6A cables • Multi-Gigabit (10/5/2.5/1) Ethernet capable • Swappable during system operation

• 2.03 Gbps wireless throughput and 4 Gigabit wireline ports 5GHz 4×4:4 MU-MIMO • Supports up to 200 concurrent Wi-Fi client devices • Advanced QoS to ensure real-time performance of low-latency applications • Anti-hacking secure boot and critical data/control lockdown via digital signatures, unique security certificate/random default password per device • Self-power adaptation upon auto detection of PoE or PoE+ • Embedded controller can manage up to 30 local GWN series APs • GWN.Cloud offers unlimited AP management; GWN Manager offers premise-based software controller

• Tabletop router Blue • Dual-band (2.4 GHz / 5 GHz) Wi-Fi 7 (802.11be) 6760 Mbit/s • Gigabit Ethernet • Ethernet WAN DSL WAN • Ethernet LAN (RJ-45) ports: 3 • USB port

The MB302L-B cable from Icy Dock is an internal MCIO x8 (SFF-TA-1016) to 2x OCuLink x4 (SFF-8611) cable for connecting HBA/RAID cards to the ICY DOCK mobile racks/enclosures MB699VP-B V2/V3, MB720MK-B V2/V3, MB852M2PO-B, MB872MP-B, and MB873MP-B. The connectors comply with the SFF-TA-1016 and SFF-8611 specifications, and the transfer rates correspond to the PCIe 4.0 specifications. The SFF-9402 compliant cable design supports common NVMe/Tri-Mode HBA/RAID cards. The cable has passed UL20744 certification and meets safety requirements. Type of cable Color black EAN 4713227446136 Manufacturer No. MB302L-B Made in China Application example for HBA / RAID cards and ICY DOCK removable frames Data transfer area Connection of 1x MCIO 8i, SFF-TA-1016 (male) to 2x OCuLink (male) PCIe 4.0 protocol Taps 3 Properties internal, sleeved Feature OCuLink connector with retaining clips for secure connections Cable length 50 cm

• The use of high quality photoelectric integration module to provide good optical and electrical characteristics • Ensure reliable data transmission and long working life • Support full duplex or half duplex mode, with automatic negotiation capability • Network port support automatic cross identification • Internal storage and forwarding mechanism, support a variety of protocols • In line with industrial operating standards, the average trouble-free work in more than 300,000 hours • Working power supply: DC 48-57V to provide reverse protection • Interface: 1-port 10/100/1000 Base-Tx RJ-45 with auto negotiation and auto-MDI/ MDI-X function, supplying 30W PoE, compatible with 802.3at/at • 10/100/1000 Base-TX Port: 1 port RJ-45 auto-MDI / MDI-X • PoE Standard: IEEE802.3af/ IEEE802.3at • PoE ports: +1 Port PoE • Power Output: Max. 15.4 watts (IEEE 802.3af), Max. 30 watts (IEEE 802.3at) • PoE port Auto detect af/at devices • Output Voltage: DC48V • Power Pin Assignment: 1/2+;3/6- • Power Type: End-span(Mid-span optional) • 1000 Base-FX Port: SFP Slot • Optical Frequency: Vary on module • Performance Specification: Bandwidth: 14 Gbps, Packet Buffer Memory:1.2 Mbit, Packet Forwarding Rate:10.5 Mpps, MAC Address Table: 2K • Installation: DIN rail • Maximum Frame Size: 9000 bytes packet size • Flow Control: Back pressure for half duplex, IEEE 802.3x pause frame for full duplex • Enclosure: IP40 aluminum housing • LED Indicator: Power: Red, Fiber: Link 2(Green), Ethernet: Yellow • Power Input: 48 to 57V DC redundant power • Power Consumption: 300,000hours • Dimensions (W x D x H): 118x 92.4 x 40 mm • Weight: Product Weight: 0.4KG, Packing Weight: 0.53KG • Working Environment: Working temperature: -40～80℃, Storage temperature: -40～80℃, Relative Humidity: 5%~95 %(no condensation)

• Tabletop router White • Dual-band (2.4 GHz / 5 GHz) Wi-Fi 7 (802.11be) 3568 Mbit/s • 2.5 Gigabit Ethernet • Ethernet WAN DSL WAN SIM card slot 3G/4G USB modem compatibility • Ethernet LAN (RJ-45) ports: 1 • USB port • Web-based management • MIMO

The Telekom 5G receiver is an outdoor mobile network unit for the Speedport Smart 4. By combining mobile (5G and LTE) and fixed-line networks, and using a corresponding hybrid 5G/LTE tariff option, it enables higher internet bandwidths and increased reliability. For optimal and interference-free mobile reception, the 5G receiver must be installed outdoors. Thanks to mesh Wi-Fi technology, it ensures stable Wi-Fi throughout the entire house. Receiver type Color white EAN code 4025125549483 Manufacturer's No. 40824596 Antenna type: Mobile communications Area of application: Outdoor Feature IP66 protection class Further information on mobile network standard: 4G / 5G NR Included accessories: 5G receiver, power supply, 10 m flat LAN cable including pre-mounted splash-proof end cap, 1.5 m network cable for connecting the power supply to the Speedport Smart 4, screw clamp for mounting, swivel joint for mounting the 5G receiver on an exterior wall, glass bracket including adhesive strips for mounting on a window pane, quick start guide Dimensions: Width: 112 mm x Height: 190 mm x Depth/Length: 40 mm Weight 550 grams

• SD-WAN – incl. zero-touch deployment and Auto-VPN via the LANCOM Management Cloud • Multi-WAN – two integrated VDSL Supervectoring modems (operable in parallel) for up to 2x 300 Mbps or alternatively use of a modem at a G.fast connection, high-speed Internet via fiber optics (GPON and AON modules available separately), and Gigabit Ethernet for connection of external modems (1x WAN Ethernet), 1x SFP/TP combo • Load balancing for the active/active operation of several Internet lines and maximization of the available bandwidth • Professional telephony features thanks to integrated LANCOM VCM (Voice Call Manager) & SBC (session border controller) • Continued use of existing ISDN and analog components via 2x ISDN S0 (NT) for point-to-point or multipoint line configuration, 4x analog (internal) / fax • 25 simultaneous IPsec VPN connections (100 optional) • Network virtualization with up to 64 networks on one device (ARF) • Full-metal housing with front-facing connections and integrated 230V power supply unit for mounting in a 19" rack • Maximum future compatibility, reliability, and security "Engineered in Germany"

Meie menuka 4G-ruuteri edule tuginedes on selle täiustatud versioon varustatud mitmekülgse Power over Ethernet (PoE+) funktsiooniga. See töökindel ruuter pakub kahe SIM-kaardi ja eSIM-kaardi toetust, usaldusväärset Wi-Fi-ühendust ja nelja PoE+ Ethernet-porti. RutOS-i platvormil põhinev ja mitmesugusteks IoT-rakendusteks loodud RUT951 PoE+ tagab sujuva andmeedastuse ja lihtsustab ühendatud IoT-lahenduste energiakorraldust.ÜHENDUVUS4G LTE (Cat 4), 3G, 2GKAHE SIM-KAARDI JA eSIMAutomaatse ümberlülitamise, varu-WAN-i ja muude ümberlülitamise stsenaariumidegaPoEKoguvõimsus 90 WWI-FITraadita juurdepääsupunkt koos hotspoti funktsioonigaMobileMobile module4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps3GPP ReleaseRelease 10/11 depending on the hardware versionSIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protectioneSIMConsumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plansStatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNCSMSSMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPPUSSDSupports sending and reading Unstructured Supplementary Service Data messagesBlock/Allow listOperator block/allow list (by country or separate operators)Multiple PDNPossibility to use different PDNs for multiple network access and servicesBand managementBand lock, Used band status displaySIM PIN code managementSIM PIN code management enables setting, changing, or disabling the SIM card's PINAPNAuto APNBridgeDirect connection (bridge) between mobile ISP and device on LANPassthroughRouter assigns its mobile WAN IP address to another device on LANWirelessWireless mode802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)Wi-Fi securityWPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)SSID/ESSIDSSID stealth mode and access control based on MAC addressWi-Fi usersUp to 100 simultaneous connectionsWireless Connectivity FeaturesFast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)Wireless MAC filterAllowlist, blocklistWireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login informationTravelMateForward Wi-Fi hotspot landing page to a subsequent connected deviceEthernetWAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIXLAN3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXNetworkRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routingNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLANVoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rules, TTL target customisationFirewall status pageView all your Firewall statistics, rules, and rule countersPorts managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so onNetwork topologyVisual representation of your network, showing which devices are connected to which other devicesHotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themesDHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcardsQoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyDNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPSNetwork backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic FailoverLoad balancingBalance Internet traffic over multiple WAN connectionsSSHFSPossibility to mount remote file system via SSH protocolTraffic ManagementReal-time monitoring, wireless signal charts, traffic usage historyPort MirroringMirroring network traffic on Ethernet ports for monitoring and analysisSecurityAuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generatorFirewallPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLANPort and tag-based VLAN separationMobile quota controlMobile data limit, customizable period, start time, warning limit, phone numberWEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess controlFlexible access control of SSH, Web interface, CLI and TelnetSSL certificate generationLet's Encrypt and SCEP certificate generation methodsVPNOpenVPNMultiple clients and a server can run simultaneously, 27 encryption methodsOpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)GREGRE tunnel, GRE tunnel over IPsec supportPPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec supportStunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub supportSSTPSSTP client instance supportZeroTierZeroTier VPN client supportWireGuardWireGuard VPN client and server supportTincTinc offers encryption, authentication and compression in it's tunnels. Client and server support.OPC UASupported modesClient, ServerSupported connection typesTCPMODBUSSupported modesServer, ClientSupported connection typesTCPCustom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionalitySupported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCIIDATA TO SERVERProtocolHTTP(S), MQTT, Azure MQTTData to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server featureMQTT GatewayModbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT brokerDNP3Supported modesStation, OutstationSupported connectionTCPDLMS/COSEMDLMS SupportDLMS - standard protocol for utility meter data exchangeSupported modesClientSupported connection typesTCPAPITeltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.comMonitoring & ManagementWEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet statusFOTAFirmware update from server, automatic notificationSSHSSH (v1, v2)SMSSMS status, SMS configurationCallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/offTR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTTMQTT Broker, MQTT publisherSNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protectionJSON-RPCManagement API over HTTP/HTTPSRMSTeltonika Remote Management System (RMS)IoT PlatformsThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity - Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actionsAzure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT HubsAWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionalitySystem CharacteristicsCPUMediatek, 580 MHz, MIPS 24KEcRAM128 MB, DDR2FLASH storage16 MB, SPI FlashFirmware / ConfigurationWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FWRMSUpdate FW/configuration for multiple devices at onceKeep settingsUpdate FW without losing current configurationFactory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configurationFIRMWARE CUSTOMISATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment providedGPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needsPackage ManagerThe Package Manager is a service used to install additional software on the devicePOE INPoE portsPort 1 (LAN1)PoE standards802.3af/at compliant PD port (LAN1)POE OUTPoE portsPort 2 - 4 (LAN2, LAN3, WAN)PoE standards802.3af/at compliant PSE ports (LAN2, LAN3, WAN)PoE Max Power per Port (at PSE)30 W MaxPoE Power Budget (at PSE)90 WPowerConnector4-pin industrial DC power socketInput voltage range9 – 57 VDC, reverse polarity protection, surge protection >58 VDC 10us maxPoE-Out input voltage range44 – 57 VDCPower consumptionIdle: < 5 W, Max: < 6.5 W, PoE Max: 100 WPhysical InterfacesEthernet4 x RJ45 ports, 10/100 MbpsI/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connectorStatus LEDs1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x PowerSIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional - different hardware required; contact your sales manager)Antennas2 x SMA for LTE, 2 x RP-SMA for Wi-Fi antenna connectorsResetReboot/User default reset/Factory reset buttonPhysical SpecificationCasing materialAluminium housing, plastic panelsDimensions (W x H x D)110 x 50 x 100 mmWeight287 gMounting optionsDIN rail, wall mount, flat surface (all require additional kit)Operating EnvironmentOperating temperature-40 °C to 75 °COperating humidity10% to 90% non-condensingIngress Protection RatingIP30Regulatory & Type ApprovalsRegulatoryCE, UCRF, EAC, UKCA, RCM, WEEEEMC Emissions & ImmunityStandardsEN 55032:2015 + A11:2020EN 55035:2017 + A11:2020EN IEC 61000-3-2:2019 + A1:2021EN 61000-3-3:2013 + A1:2019EN 301 489-1 V2.2.3EN 301 489-17 V3.2.4EN 301 489-52 V1.2.1ESDEN 61000-4-2:2009Radiated ImmunityEN 61000-4-3:2020EFTEN 61000-4-4:2012Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014 + A1:2017CSEN 61000-4-6:2014DIPEN 61000-4-11:2020RFStandardsEN 300 328 V2.2.2EN 301 511 V12.5.1EN 301 908-1 V15.2.1EN 301 908-2 V13.1.1EN 301 908-13 V13.2.1SafetyStandardsCE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017RCM: AS/NZS 62368.1:2022CB: IEC 62368-1:2018

RUT261 is a compact, cost-effective cellular LTE router designed to deliver fast and stable connectivity with 4G Cat 6, enabling optimal throughput for everyday operational needs. Its space-efficient housing integrates easily into tight or embedded installations, making it ideal for constrained environments. With dual Ethernet ports, the RUT261 covers essential LAN and WAN connectivity, ensuring reliable wired networking where needed. Focused on core functionality, it provides the essential features required for industrial deployments without added complexity or unnecessary costs, making RUT261 a practical and affordable choice for streamlined connectivity. COST EFFECTIVE 4G CAT 6 Optimize daily operations with low price LTE Cat 6 speeds COMPACT FORM FACTOR Integrates into tight or embedded setups with its compact housing DUAL ETHERNET Covers essential LAN and WAN connectivity ZERO TOUCH DEPLOYMENT Manage devices, perform maintenance, enable VPN access, and gather data through RMS. COST EFFECTIVE 4G CAT 6 COMPACT FORM FACTOR DUAL ETHERNET ZERO TOUCH DEPLOYMENT

TP-Link TL-MR100P 300 Mbps Wireless N 4G LTE Router | TP-LINK

• 8 x 2.5G PoE ports and 2 x 1G/10G SFP+ uplink ports for high-speed industrial networking • High-power PoE++ (IEEE 802.3af/at/bt) with up to 90W per port and a total power budget of 480W • PoE Watchdog automatically detects and restarts unresponsive powered devices • Advanced L3 management with support for RIP, OSPF, and VRRP • 6kV surge protection for reliable operation in harsh environments • Industrial-grade design with a wide operating temperature range of -40°C to 75°C • Flexible installation options, including DIN-rail, wall-mount, and desktop deployment

• Blazing-fast multi-gigabit speeds up to 10G / 5G / 2.5G / 1G / 100 Mbps • Ultra-fast 10G connectivity via USB 3.2 Gen 2x2 for maximum bandwidth performance • Plug & Play with auto-negotiation and auto MDI/MDIX • Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption • Supports jumbo frames up to 16K bytes for faster data transfer efficiency • Wake-on-LAN (WoL) & Modern Standby for smart power management • Wide compatibility with macOS and Windows systems

• Wired • PCI Express 3.0 Ethernet • Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet 10000 Mbit/s • Internal Component for: Server

• Remotely schedule UPS shutdown, start-up, and reboot • Plug and play installation • User-upgradeable firmware • Secure authentication