Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Archer C6 V4 AC1200 Wireless MU-MIMO Gigabit Router - AC1200 Dual-Band Wi-Fi – 867 Mbps at 5 GHz and 400 Mbps at 2.4 GHz band - MU-MIMO Technology – Simultaneously transfers data to multiple devices for 2× faster performance - Boosted Coverage – Four external antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals - Access Point Mode –Supports AP Mode to transform your wired connection into the wireless network - Easy Setup – Set up your Wi-Fi in minutes with TP-Link Tether app. Archer C6 V4 Wireless Router, Available bandwidth 1200 Mbps Data transmission speed 867 Mbps, Wi-Fi 5 1 WAN, 4x10/100/1000M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Omni-Directional, Number of antennas 4 Wireless Frequency Range 2.4 and 5 GHz, Included Accessories Power Adapter;RJ45 Ethernet Cable;Quick Installation Guide Power supply requirements 12 V - 1 A, Dimensions 215 × 117 × 32 mm
Xiaomi Mesh System | AC1200 EU (1-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
Avasta uue ajastu WiFi AX1800 Dual-Band Wi-Fi 6 sobiliku ruuteriga Archer AX23 Gigabit LAN portide ja 4 antenniga ruuter pakub ülikiiret ja usaldusväärset ühendust.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Excellent N speed brings best experience for video streaming and internet calls Dual external antennas deliver performance enhancement One button to easily setup a highly secured wireless link 1.5 meters USB extension cable enables convenient hardware connection Supports Windows 2000 / XP / Vista / 7
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
GS1100 Unmanaged Plus SeriesThe Zyxel GS1100 Unmanaged Plus Series is designed for small business and SMB environments, delivering instant Gigabit connectivity with more than simple plug-and-play operation. A straightforward web-based interface enables easy management of essential functions.? Instant gigabit speeds with easy plug-and-play Slim, space-saving design for desks, walls, and tight server cabinets Energy-efficient and fanless for silent, eco-friendly networking Simplified web-manager functions, including VLAN, loop prevention, port isolation, EEE, and PoE Access your network beyond plug-and-playThe GS1100 Unmanaged Plus Series supports Auto MDI/MDI-X, eliminating the need for crossover cables or dedicated uplink ports. Designed for more than simple plug-and-play deployments, the series also performs reliably in more demanding network environments. Its intuitive web-based management interface allows users to easily configure essential functions such as loop prevention, VLAN, VLAN trunking, and more.Gigabit to the desktopThis Series offers 16-port Gigabit non-blocking wire-speed transmission. With superior Gigabit performance and flexible form factor options, it is the ideal solution for bandwidth-intensive applications in small office environments.Freedom of installation via PoEThe GS1100-16EP supports the IEEE 802.3at PoE+ standard and easily connects with PoE ready devices to your network with plug-and-play design. PoE+ allows 30 watts per port to power WiFi 6/7 APs, VoIP phones and IP surveillance cameras only through Ethernet cables reducing the need of power adapters saving installation time and cost. The GS1100-16EP has been designed with 16 full PoE+ ports with total PoE power budget of up to 135 Watts, which makes it an ideal PoE connectivity solution for home, shop and small office environments.Fanless designThe GS1100 Unmanaged Plus Series has fanless design that ensures silent operation in small or quiet office environments. The PoE model GS1100-16EP is specifically designed with an external power adapter that eliminates the need for an additional fan to cool down the device, making it perfect for quiet PoE deployments.
- HomePlug AV2 Standard - high-speed data transfer rates of up to 1000 Mbps, supporting all your online needs - Gigabit Port - provides secure wired networks for desktops, smart TVs or games consoles - Plug and Play - allows setup of your powerline network in minutes, so you can enjoy fast, seamless wired connections right away - Integrated Power Socket - ensures no power outlet goes to waste - Patented Power-Saving Mode - automatically reduces power consumption by up to 85%
Ultimate power for your whole home hAP ax³ is our most powerful AX device with the best wireless network coverage so far. It features a modern quad-core ARM CPU running at 1.8 GHz and enough memory (1GB RAM + 128 MB NAND) for most tasks. Complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing, or multiple remote work VPN tunnels won’t stop your family from comfortable browsing, streaming, gaming, and so on. There’s enough processing power for everyone. And we’ve added a speedy USB 3 port for all your storage purposes or an additional LTE modem. AX wireless – as strong as an ox Depending on your overall setup, our AX product family offers up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum! Potent external antennas allow reaching gain up to 5.5 dBi, so you can forget about Wi-Fi Boosters and other tricks. Smooth and fast connectivity for your whole apartment – that’s just how hAP ax³ works. Home network speeds are getting serious. There are 4x Gigabit Ethernet ports and an ultra-fast 2.5 Gigabit port. Safer in many ways hAP ax³ can ease your mind on multiple levels simultaneously. European-based production, our famous Nordic work ethic, and cooperation with the EU lawmakers ensure full compliance with all the necessary safety policies. Multiple power options (DC Jack & PoE-in) result in fewer worries about potential downtime. The latest RouterOS v7 updates and the addition of WPA3 advanced encryption support bring unprecedented software security. To sum things up - hAP ax³ is among the fastest, safest, and most powerful choices in the home access point world. Wired or wireless. And it comes with the most advanced networking software on the market – RouterOS. Unlike many other vendors, we don’t limit what you can do. There are no paywalls or confusing subscriptions. All our devices share the same limitless operating system. Imagination is the only limitation. Some might ask – why do we even need higher wireless speeds? Well, countless use cases have been previously impossible or difficult to pull off. For example, working with large media files over the wireless network – without the need to download and upload everything. Do you really have the time to wait? Grab a hAP ax³ and save more time for the essential things in life. hAP ax³ Wireless Router, Data transmission speed 1800 Mbps IEEE 802.11 b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax USB 3.0, 5x10/100/1000M Antenna Type Omni-Directional, Number of antennas 2 Included Accessories power adapter, fastening set, HGO indoor antenna kit, Case base, Power supply requirements DC 12-28 V / PoE 18-28 V Colour Black, Dimensions 251 x 130 x 39 mm
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
RUT140 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil tagab see sujuva ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstusprotokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga tõhusaks kaug- ja kohapealseks haldamiseks.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4 TOITEPINGE1 x 3-poolne tööstuslikuks kasutamiseks kohandatud toitepistikupesaLIHTNE PAIGALDAMINELihtne paigaldus integreeritud DIN-riba klambrigaRMSKaugjuhtimine, juurdepääs ja VPN-teenused
AX1800 High Gain Wireless USB Adapter Lightning-Fast WiFi 6 – Stream flawless video with 1800 Mbps wireless speeds (1201 Mbps on 5 GHz + 574 Mbps on 2.4 GHz)† Flexible Dual Band – Ensure your PC has the best connection with 5 GHz and 2.4 GHz bands Dual High-Gain Antennas – Connect from farther away with high gain antennas and Beamforming technology Ultra-Low Latency – The combo of OFDMA and MU-MIMO ensures the most efficient Wi-Fi connection for your PC, reducing latency for faster speeds‡ SuperSpeed USB 3.0 – Up to 10× faster transfer speeds than USB 2.0 Refined Security – Protect your personal data with the latest WPA3 encryption△
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
TL-SG2218P Smart JetStream Switch, 18 Gigabit Ports, including 16 PoE+ Ports 150W total PoE power: 16 802.3af/at compliant PoE+ ports provide a total of 150W PoE power. Gigabit Ports: 16 Gigabit PoE+ ports and 2 Gigabit SFP slots ensure high-speed connections. Operation integrated with the Omada SDN platform: Unattended ZTP configuration, Cloud Central Management and Intelligent Monitoring. Centralized management: Cloud access and the Omada app is the convenience of management. Static Routing: Control internal traffic for more efficient use of network resources. Robust Security: IP, MAC and Port Binding, ACL, Port Security, DoS Protection, Storm Control, DHCP Snooping, 802.1X, Radius Server Authentication and much more. Optimization of Voice and Video transmission: L2/L3/L4 QoS and IGMP snooping. IPv6: IPv6 support with IPv4/IPv6 dual stack, MLD snooping and IPv6 neighbor discovery. Realize more possibilities with Omada Smart JetStream switch, 18 Gigabit ports, including 16 PoE+ ports. Software control of network infrastructure (SDN) with access from the cloud Omada's Software Network Infrastructure Control (SDN) platform integrates the operation of network devices, including access points, switches and gateways, for end-to-end central management from the cloud. Omada allows you to create a highly scalable network - fully controlled with a single interface. This translates to seamless wired and wireless connections that are essential in hospitality, education, retail, offices and many other industries and places.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
Almost silent operation The GS1900 series includes both fanless models and models with built-in intelligent fans. The intelligent fan is designed to automatically adjust its speed based on the temperature of the device. You can barely hear the sound when the switch is working. It is perfect for your office environment. Fast gigabit performance built for small and medium businesses The GS1900 is a series of switches with full non-blocking throughput up to 1Gbps per port. The perfect upgrade for an unmanaged switch, it's a great choice for small and medium businesses that want to run high-speed business network applications at full wired speed without blocking. Easy and intuitive management Smart Managed GS1900 Series Switch with web interface to easily manage advanced features such as VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS Prevention. In addition, a user-friendly wizard helps you quickly go through setup, configuration and even advanced settings.
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
Omada | Type Wireless Access Point | Data transmission speed 3000 Mbps | IEEE 802.11a/b/g | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax | 1x10/100/1000M | Wireless Frequency Range 2.4 GHz and 5 GHz | Included Accessories EAP653 UR Ceiling/Wall Mounting Kit Installation GuideNote: DC adapter is not included in the package, and is sold separately. | Power supply requirements 12V DC / 1.5 A (Power Adapter IS NOT included) ; 48V Passive PoE | Colour White | Dimensions 160 160 33.6 mm
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Manage the whole network locally or from the cloud via web UI or Omada app. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both Power over Ethernet (802.3at) and DC power supply for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP610
8-Port Unmanaged Ethernet Switch > Supports eight 10/100 Mbps adaptive ports. > Small and light, it is easy to carry and has multiple chips embedded in it. > Easy to operate. > MTBF 952.50 years. > Casing Materia: Metal.
The Ugreen DHP4300 Plus NAS is a versatile network storage system for both home and professional use. It enables centralized storage, management, and backup of data, providing a reliable solution for file sharing and backup tasks on the local network. Its compact design and flexible deployment options make it ideal for home offices and small office environments. With 2FA (two-factor authentication), an essential layer of security is added to your data, drastically minimizing the risk of unauthorized access and protecting against modern cyber threats. Type NAS A NAS shines when you want one place for files, photos, and backups—accessible to multiple devices without scattering copies across laptops and external drives. That centralization makes everyday tasks easier: shared folders, automatic backups, and a consistent library for work documents or media collections. It’s also a resilience play—having a dedicated storage system reduces the chance that a single lost laptop or failed drive turns into a painful data-loss story. For a home office or small team, the practical advantage is control: you keep the data on your own network while still making it easy to access and manage. color black EAN code 6941876286607 Manufacturer's No. 85660 Device type NAS The designation USB 3.2 Gen 1 corresponds to the earlier designations USB 3.1 Gen 1 and USB 3.0. Storage available, not installed Connections 1x HDMI, 1x RJ-45 (LAN), 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Features NFC capability, Further information on the operating system: UGOS Pro Dimensions: Width: 15.5 cm x Height: 21.57 cm x Depth/Length: 15.5 cm
SFP1-BIDI-SU 1.25 Gb/s Simplex SC/UPC Module - 20 km BThe SFP1-BIDI-SU module enables a bidirectional fiber-optic connection using only a single single-mode fiber. BIDI technology uses 1310 nm and 1550 nm wavelengths to separate data transmission and reception, reducing the number of fibers required to establish a connection.This solution is suitable both for building new fiber links and expanding existing infrastructure. It allows available optical fibers to be used more efficiently without the need for separate fibers for transmission in each direction.Gigabit Ethernet connection up to 1.25 Gb/s A transmission rate of up to 1.25 Gb/s enables stable Gigabit Ethernet connections between switches, routers, media converters, and other devices equipped with compatible SFP ports.The module can be used, among other applications, to connect distribution points, devices located in different parts of a building, and infrastructure components situated farther apart. Transmission over single-mode fiber helps maintain signal stability even over longer distances.Simplex SC connector for commonly used installations The Simplex SC connector makes it easy to connect the module to fiber-optic links terminated with a standard SC connector. This type of connection is commonly used in fiber distribution frames, telecommunications cabinets, and distribution points.Transmission range matched to the fiber link The SFP1-BIDI-SU is available in versions supporting transmission distances of up to 3 km or up to 20 km. This makes it easier to select the appropriate module for both shorter inter-building connections and more extensive fiber-optic links.The transmission range can be selected according to the link length, the parameters of the fiber used, and the overall optical power budget. This makes it possible to create a solution tailored to the actual network requirements without using a module with an unnecessarily long transmission range.Easy expansion of fiber-optic infrastructure The compact SFP form factor allows the module to be installed directly in a compatible network device. Hot-swappable operation makes it easier to expand or modify the connection configuration without rebuilding the entire infrastructure.The SFP1-BIDI-SU is a practical choice wherever Gigabit Ethernet transmission, efficient use of available fibers, and compatibility with commonly used SC connectors are important.BIDI modules are sold in A and B versions and operate only as a complementary A + B pair. The TX and RX directions are reversed between the two versions: BIDI A: TX - 1310 nm wavelength; RX - 1550 nm wavelength. BIDI B: TX - 1550 nm wavelength; RX - 1310 nm wavelength. A connection using two modules of the same version will not work.
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
Deco X10 on AX1500 terviklahendusega silmusvõrk (mesh) Wi-Fi 6 süsteem, mis pakub kiiret ja stabiilset internetiühendust kogu kodus. See suudab ühendada rohkem seadmeid ning tagab sujuva ja katkestusteta katvuse tänu Wi-Fi 6 tehnoloogiale. • Wi-Fi 6 kiirus kuni 1500 Mbps • OFDMA ja MU-MIMO tehnoloogia • Sujuv kogu kodu katvus (kuni 190 m 2 ) • Väga madal latentsus • Ühtne võrk • Tugevad vanemlikud kontrollid • Lihtne seadistamine Deco rakendusega
