QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
MR70X | Available bandwidth 1800 Mbps | Data transmission speed 1200 Mbps | Wi-Fi 6 | 1 WAN | 3x10/100/1000M | Antenna Type Omni-Directional | Antenna Gain 5 dB | Number of antennas 4 | Dimensions 208.8 × 171.6 × 41.7 mm
TRB143 tööstuslik värav on loodud integreeritud M-Bus liidesega spetsiaalselt telemeetria ja kommunaalteenuste jälgimise rakenduste jaoks. Sellel on mobiilside- ja traadiga ühenduvus, üks Gigabit Ethernet-port ja paar digitaalset sisendit/väljundit, mistõttu on see rakendatav mitmesugustes keskkonnaseire stsenaariumides.
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
DIN LATT Sisseehitatud, integreeritud DIN-kinnitus KOMPAKTNE 102 x 25 x 81,5 mm GIGABIT ETHERNET 4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s 7-57 V Lai valik toetatud toitepingeid KESTVUS Vastupidav alumiiniumist korpus -40 °C KUNI 75 °C Lai töötemperatuurivahemik TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus. Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid. TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega. 10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime. 2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
7-57 V Lai valik toetatud toitepingeid TOITEPISTIKUPESA 2-poolne tööstuslik alalisvoolupesa SFP 2 x SFP-port kaugkasutatava fiiberoptilise side jaoks KESTVUS Vastupidav alumiiniumist korpus tööstuslikuks kasutamiseks KORRALDUS DIN-riba ja pinnapealse paigalduse võimalused ETHERNET 8 x Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s TSW210 on tööstuslik haldamata kommutaator ressursside tsentraliseerimiseks. Varustatud 2 SFP-portiga pikamaa valguskaabelühenduseks ja 8 Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s allalaadimise/üleslaadimise kiirusega. Vastupidav, vastupidav alumiiniumist korpus koos DIN-riba ja pinnapealse paigaldamise võimalustega teeb TSW210 ideaalseks tööstuskeskkondadesse. 2-poolne tööstuslik alalisvoolu pistikupesa, mille sisendpinge on vahemikus 7-57 VDC.
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
Add this QSFP module for distances up to 10 kilometers to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power, transceiver supply voltage, temperature, laser bias current monitoring, and other key parameter monitoring. These options can be helpful not only to alert the user during abnormal transceiver activity but also if specific customizable operating limits are exceeded. Monitoring allows you to plan ahead, make informed decisions and predict necessary upgrades or maintenance based on the transceiver performance.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
CS4228-24GT-375 28-Port Cloud Managed Desktop Gigabit Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
The Ubiquiti UniFi Swiss Army Knife Ultra combines high-capacity networking with advanced security features and durable design. This device supports over 200 wireless clients and offers dual-band connectivity, ensuring robust and versatile network performance in various environments. With its weatherproof and UV-resistant enclosure, it stands up to the challenges of outdoor deployment, making it an ideal choice for expanding your wireless network outdoors. Security is a priority, with multiple encryption algorithms supported to protect your network. Additionally, the ease of installation with PoE makes it a practical solution for network administrators looking to minimize setup complexity. Whether for a campus, park, or industrial site, the Ubiquiti UniFi Swiss Army Knife Ultra is engineered to deliver reliable, secure, and high-performance wireless connectivity.
Stacking Physically stacking up to 8 switches for expansion and redundancy Touchless installation Seamless multi-site deployment with automatic configuration download Large PoE budget Power over Ethernet (PoE) budget up to 370W allows you to power multiple devices. 10G connections Four 10-gigabit ports for stacking or uplinking Multi-gigabit PoE ports Four 2.5G PoE ports, ideal for Gigabit Wi-Fi 6 access points Redundant power An optional redundant power supply ensures uninterrupted operation Advanced L2 and L3 features Easily adapt to network changes with selectable Q-in-Q, VRRP, RIP and OSPF features Limited Lifetime Guarantee Register your product to take advantage of Lifetime Limited's lifetime warranty A new dimension in Managed Smart Switches Expandable network with high-performance 10-gigabit stackable switches to increase productivity and uptime. High availability Simplification of management and cabling increases the efficiency and reliability of the network. Physical stacking up to 8 switches with a total bandwidth of 80G. Designed with Wi-Fi 6 in mind The multi-gigabit 2.5G ports on the DGS-1520 series PoE switches eliminate potential bottlenecks in connecting to WiFi 6 gigabit access points. Touchless deployments For multi-site network expansion, the latest firmware and network configurations for the DGS-1520 series switches can be downloaded without the need to involve on-site IT personnel, making deployments easier and faster. Advanced L2 and L3 features Advanced, selected software features - Q-in-Q, VRRP, RIP and OSPF enable adaptation to changes in the network. For businesses with increasing bandwidth and network expansion requirements, the DGS-1520 series switches are a cost-effective upgrade option with 10-gigabit connections for network infrastructure.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
Dual-band Wi-Fi 6 with speeds up to 1500 Mb/s - 1201 Mb/s in the 5 GHz band and 300 Mb/s in the 2.4 GHz band. Seamless roaming on one unified network - Halo units work together to automatically switch between Halo systems as you move around your home using one unified Wi-Fi name and password. Connect 100+ Devices - Provide fast and stable connections for 100+ devices. Easy home network management - use the app to quickly set up and manage your Wi-Fi network. You can also manage your children's time and online content. Full Gigabit Ports - Gigabit ports for lightning-fast wired connections.
Ubiquiti UXG-Pro on täiustatud ettevõtte tasemel ruuter, mis on loodud pakkuma suure jõudlusega võrgu- ja turvalahendusi. See pakub tugevaid liikluse haldamise funktsioone, sujuvat integreerimist UniFi tsentraliseeritud haldusplatvormiga ning võimsaid turvavahendeid tänapäeva ettevõtetele.Peamised omadused:Kõrge jõudlus: Varustatud võimsa riistvaraga, mis suudab käsitleda kiiret andmevahetust ja keerukaid võrgukeskkondi.Täpsem turvalisus: Sisaldab sissetungide tuvastamist ja ennetamist (IDS/IPS), sügavat pakettide inspekteerimist ja tulemüüri funktsioone võrkude kaitsmiseks ohtude eest.Topelt-WAN ja varuühendus: Toetab mitut internetiühendust automaatse üleminekuga, tagades katkestusteta internetiühenduse.Tsentraliseeritud haldus: Täielikult ühilduv UniFi pilvepõhise kontrolleriga, mis muudab võrkude haldamise ja jälgimise lihtsaks kõikjalt.Laiendatav disain: Ideaalne kasvavatele ettevõtetele, kuna seda saab hõlpsasti laiendada vastavalt võrgu vajadustele.Rack-kinnitusega: Sobib standardsetesse andmekeskuse riiulitesse professionaalseks paigaldamiseks.
Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.
The Mercusys MA30H V2 network adapter is a powerful, dual-band wireless solution designed to meet the demands of modern connectivity. With support for both 2.4 GHz and 5 GHz bands, users enjoy flexible and high-speed Internet access, making it ideal for streaming, gaming, and downloading. The device offers data transfer rates of up to 867 Mbps on the 5 GHz band and 400 Mbps on the 2.4 GHz band, ensuring smooth and efficient online experiences. Security is paramount, and the MA30H V2 addresses this with WPA3-SAE encryption, offering users peace of mind with enhanced network protection. Additionally, the adapter features MU-MIMO technology, which optimizes the communication process between the router and multiple devices, significantly improving the network's capacity and efficiency. Its Plug-and-Play compliance makes setup straightforward, eliminating the need for complex configurations. Whether for work or play, the Mercusys MA30H V2 network adapter is a reliable choice for anyone looking to upgrade their wireless connectivity.
The Acer Wave 7 Wi-Fi system is designed to meet the demands of modern homes and small offices, offering reliable connectivity and performance. With its support for Wi-Fi CERTIFIED 7 standards, users can enjoy fast Internet speeds across multiple bands (2.4 GHz, 5 GHz, and 6 GHz). The device's 3-port switch and mesh networking capabilities allow for easy expansion and coverage throughout your space, ensuring that all your devices stay connected. Advanced features like Hybrid QoS, Multi-Link Operation (MLO), and Firmware Over-the-Air (FOTA) updates enhance the online experience, providing smooth streaming, gaming, and browsing. Additionally, the inclusion of a WPS button and reset button simplifies network setup and management, making the Acer Wave 7 a smart choice for those seeking a powerful, yet user-friendly Wi-Fi system.
TP-LINK Gigabit Smart Switch TL-SG2210P is equipped with 8 Gigabit RJ45 ports and 2 SFP slots, all RJ45 ports support the PoE standard with total PoE power budget of 53 W and useful PoE power management features. The switch provides high performance, enterprise-level QoS, useful security strategies and rich Layer 2 management features.TP-LINK's Gigabit Smart Switch TL-SG2210P is especially designed for the small and medium business networks that require efficient network management. TL-SG2210P comes with a comprehensive set of features, such as link aggregation group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service (QoS L2 to L4), storm control and IGMP snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What's more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
WU1300S AC1300 High Gain USB Wi-Fi Adapter AC1300 WiFi speed Dual Band - Perfect for video streaming and online gaming The high-gain antenna provides a strong signal Home Security standards ensure the security of your wireless network Compatible with Windows 7/8/8.1/10, Mac OS
The DIGITUS 1x8 HDMI splitter delivers vibrant 4K resolution, making it an ideal choice for multi-screen setups. With support for video formats including DTS and Dolby Digital, this splitter ensures an immersive audio experience alongside high-quality visuals. The robust metal housing enhances durability and contributes to a sleek desktop form factor.With a video bandwidth of 18 Gbps and a maximum supported resolution of 3840 x 2160, the DIGITUS HDMI splitter provides clarity and precision in every detail. Featuring 8 HDMI ports, this device allows for multiple outputs without compromising performance. LED status indicators and auto EDID configuration simplify operation, ensuring optimal settings for your setup.
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
