Kuluefektiivne lahendus RS232/422/485 jada-tööstuslikule Ethernet-rakenduselePLANET ICS-2100T Seeria seadmeserver on spetsiaalselt loodud RS232, RS422 või RS485 jadakommunikatsiooni konverteerimiseks tööstuslikuks Fast Ethernet-võrguks, et laiendada võrgu vahemaad tõhusalt ja odavalt. ICS-2100T-s on üks 10/100BASE-TX RJ45 port ja selle töötemperatuur on vahemikus -40 kuni 75 kraadi C, mis vastab teie võrguvajadustele. ICS-2100T on kasutajatele ja süsteemiintegraatoritele ajasäästlik ja kuluefektiivne lahendus oma jadaseadmete kiireks muutmiseks Ethernet-võrku, ilma et oleks vaja asendada olemasolevaid jadaseadmeid ja tarkvarasüsteemi.KaugjuhtimineKuna ICS-2100T pakub lihtsat jadaühendust Ethernetiga ja ühendust TCP/IP-võrguga, saab kaugvõrgu süsteemi seega tõhusalt hallata selle veebi-, telneti- ja VCOM-haldusliideste kaudu. See toetab nii rakendus- kui ka jada-töörežiimi häire- või IP-aadressiga ühendamiseks, mis säästab võrguadministraatori aega võrguprobleemide tuvastamisel ja leidmisel ilma kaablite ja seadmete visuaalse kontrollimiseta. Mitu ühendusvõimalust on saadaval ka suure võrgukeskkonna jaoks.Stabiilne jõudlus rasketes keskkondadesICS-2100T pakub kõrget immuunsust elektromagnetiliste häirete ja tugevate elektriliste ülepingete vastu, mida tavaliselt leidub tehase põrandatel või kõnniteeäärsetes liiklusjuhtimiskappides. Töötemperatuur vahemikus -40 kuni 75 kraadi C võimaldab ICS-2100T paigutada peaaegu kõikidesse keerulistesse keskkondadesse.ICS-2100T, mis on varustatud kompaktse IP30 standardse metallkorpusega, võimaldab kas DIN-riba või seinale paigaldamist, et kasutada tõhusalt kapi ruumi. ICS-2100T pakub ka integreeritud toiteallikat laia pingevalikuga (9 kuni 48 V DC / 24 V AC), mis sobib ideaalselt ülemaailmseks kasutamiseks kõrge töökindlusega rakendustes, mis nõuavad kahte või varutoite sisendit.Kahe toiteallika sisend kõrge kättesaadavusega võrgusüsteemi jaoksICS-2100T omab tugevat kahekordset toiteallika süsteemi, mis on integreeritud kliendi automaatikavõrku laia pingevalikuga (9V ~ 48V DC / 24V AC), et suurendada süsteemi töökindlust ja kasutusaega. Allpool esitatud näites aktiveeritakse automaatselt riistvara ümberlülitusfunktsioon, kui toiteallikas 1 ei tööta, et ICS-2100T toiteallikas 2 jätkaks toitmist ilma töökatkestusteta.Tõhus häirehoiatus parema kaitse tagamiseksICS-2100T on varustatud veahäirefunktsiooniga, mis hoiatab kasutajaid, kui seeriaseadmeserveriga on midagi valesti. Tänu sellele ideaalsele funktsioonile ei pea kasutajad raiskama aega probleemi asukoha leidmiseks. See aitab säästa aega ja inimressurssi. ICS-2100T pakub sündmuste häirefunktsiooni, mis aitab diagnoosida ebanormaalset seadet tänu sellele, kas võrguühendus on katkenud või mitte, või taaskäivitamise vastus.Juurdepääsukontrollisüsteem - traditsiooniline süsteemirakendusEnamik ettevõtteid ja valitsusasutusi kasutab sissepääsukontrolli plaati ja Mifare'i või RFID-i, et lubada sissepääsu identiteeti. Traditsiooniliselt kasutavad juurdepääsukontrolli masinad RS232 või RS485 jadaliidest, mille kaablid on ühendatud sisselogimisserveriga. Rakendades ICS-2100T seeriaseadmeserverit, on juurdepääsukontrolli masinad võimelised laiendama võrku pikemate vahemaade taha Ethernet-liideste kaudu. Lisaks saab ICS-2100T ühendada xDSL-ruuteriga, et saada Interneti-ühendus, nii et juurdepääsukontrolli saab seadistada ja jälgida Interneti kaudu.Protsessi juhtimineRobotkonveieri, sealhulgas muude tootmismasinate jälgimiseks, seadistamiseks ja juhtimiseks on vaja PLC-d (programmeeritav loogiline juhtimine), et juhtida eespool nimetatud tootmisprotsessi. ICS-2100T saab seadistada TCP-serveri režiimi ja ühendada PLCga. Seega saab administraator konfigureerida ja määrata käskude seaded Fast Ethernet intraneti kaudu, et juhtida PLC-d eemalt, ilma et ta peaks seisma I/O masina juures.Surveillance Motion Control - Paarilise ühenduse režiimKasutades paariühenduse režiimi valguskaabli kaudu, saab ICS-2100T laiendada kasutatavate seadmete kaugust RS232-, RS422- ja RS485-liideste kaudu, muutes nende seadmete kaugjuhtimise seirekeskusest lihtsamaks ja tõhusamaks.
PP6A-LSZHCU-W-2M Patch cord cat.6A, SFTP, LSZH, white Double shielded for a reliable connection LSZH coating - does not sustain combustion, does not emit toxic compounds Gold-plated contacts Category 6A patch cord Molded ends
Installation cable twisted pair U / UTP Cat5e 4x2 stranded 100% copper 305m gray- Excellent quality thanks to the implementation of 100% copper wires- Ideal for 10Base-T, 100Base-TX and 1000Base-TX networks- Ideal for data, audio and video- U / UTP - unshielded twisted pair- Tested for standards, in accordance with the Cat5e specification- Length markers on the cable - information about the amount of cable that remains to be used
Optic patchcord LC/UPC - SC/UPC | Multimode | 50/125 | OM4 | Duplex | 1mThe fiber optic patchcord is used in networks such as LAN, WAN, CCTV and telephone, such as in the office, home or industry. Fiber optic cabling is characterized by immunity to interference and electromagnetic interference, reliability, safety due to no sparking and voltage, and high information capacity of each individual fiber. It should also be taken for the fact that the fiber-optic patchcord enables long-range signals to be transmitted due to small fiber optic fibers loss, eavesdropping of data transmission, and low and still decreasing costs.
Cat.6 U/UTP flat network cable with support for bandwidth up to 250 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250 MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameter (NExT, FExT, etc.) despite the lack of shielding. Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The very flexible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.
Cat.6 U/UTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameter (NExT, FExT, etc.) despite the lack of shielding. Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, Grey, White, Red.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. The Cat.7 cable material for operating frequencies up to 600 MHz with total braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centers, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. The Cat.7 cable material for operating frequencies up to 600 MHz with total braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centers, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.Available colours: Black, Blue, Gray, Red.
Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
The Lindy 47150 CAT 6a patch cable is designed for high-performance networking. Its SFTP and PiMF technology offers enhanced shielding, minimizing interference and providing reliable data transmission. The cable features dual RJ-45 male connectors and is constructed with 8 wires and 4 pairs, suitable for various networking applications.Built with Low Smoke Zero Halogen (LSZH) materials, this cable ensures safety in environments where fire safety is a concern. The molded and snagless design enhances durability while allowing easy installation. With a gold-plated connector, this patch cable provides excellent connectivity and is compliant with TIA/EIA-568-B standards.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
The certified LogiLink Cat.6A patch cable is ideal for data transfers up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
