Specifications Output Voltage 54V Output Rating 1.5A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 4x10/100M, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Number of antennas 2, Wireless Frequency Range 2.412~2.472 GHz, Windows 10, Windows 8, Windows 7, MacOS, Windows 98, Windows 2000, Windows NT, Windows XP, Windows Vista, Power supply requirements 5VDC / 0.6A, Dimensions 115 x 106.7 x 24.3 mm
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
RUT206 on kompaktne tööstuslik ruuter, mis toetab RS232 ja RS485 jadaliideseid ning aktiivseid ja passiivseid PoE-sisendeid. Tänu vastupidavale konstruktsioonile, 2-poolusele toitesisendile ja microSD-pesa kaudu laiendatavale andmesalvestusele on see ideaalne valik mitmesuguste asjade interneti- ja M2M-rakenduste jaoks. See 4G Cat 4 ruuter on varustatud avatud lähtekoodiga RutOS-tarkvaraga ja toetab selliseid peamisi tööstuslikke protokolle nagu Modbus, DNP3 ja DLMS.ÜHENDUS4G Cat 4, 3G, 2GJADALIIDESEDRS232 ja RS485 jadakommunikatsiooniks2-POOLNE TOITESISENDLihtne ja sobib tööstuslike rakenduste jaoksPoEAktiivsed ja passiivsed PoE sisendid
6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
EC25-EU&KNe | LAN \ WAN ports 1 | PoE ports 1 | Memory (RAM) 256MB | Flash memory capacity 512MB | Included Accessories K-91 Fastening set5 V 0.8 A power adapter | Operating temperature range -40°C to 70°C
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
8-Port GbE PoE Web Managed SwitchThe GS1200 Series Web Managed Gigabit Switch provides simple control for better management. Unlike other advanced but complex managed switches, this series of switch is suitable for most users and provides an affordable solution with essential features including VLAN, QoS, IGMP snooping, link aggregation, and port mirroring. These functions can be completed in just a few simple clicks through an easy, friendly, and intuitive Web GUI.There are five models for GS1200 series, coming with non-PoE (GS1200-5v3/8v3) to connect to devices including PCs, NAS, and print servers, PoE capable (GS1200-5HPv3/8HPv3) to provide power to IP CAM, wall mounted AP and PoE standard devices, and fiber uplink (GS1200-10v3) for easily deployment in hallways to connect network devices on the same floor and link them back to the core network.
4G and Wi‑Fi 6 connectivity The industrial Teltonika RUTC41 router combines mobile 4G LTE Cat 4 with dual-band Wi‑Fi 6, making it ideal where stable network access and fast handling of many devices matter. Maximum WLAN speed of up to 2402 Mb/s on the 5 GHz band supports smooth operation of office systems, IoT devices and industrial installations. Key advantages >4G LTE Cat 4 – provides a mobile network connection in locations without fixed wired internet. >Dual-band Wi‑Fi 6 – supports a larger number of devices with better wireless network stability. >2402 Mb/s on 5 GHz – reduces data transfer time and improves network usability. >Docker – enables containerised applications to run without an additional computer. >1 GB RAM and 1.3 GHz dual-core processor – maintain smooth operation during demanding tasks. >Automatic SIM switching – maintains connectivity continuity if there are problems with one card or the operator’s network. Edge performance The combination of 1 GB RAM and a 1.3 GHz processor provides enough power for local data processing, event logging and edge services. This configuration reduces the need to move some tasks to an external server, which speeds up system response and simplifies deployment in the field. Docker and RutOS The router runs on RutOS and supports Docker, so you can run your own services without expanding the installation with a separate industrial computer. This is a convenient solution for deployments where quick configuration, remote management and the ability to expand the device’s functions as project needs grow are important. Stable local network The model offers 5 Gigabit Ethernet RJ-45 ports and Ethernet WAN support, making it easier to build a wired infrastructure for cameras, terminals, controllers and access points. In addition, support for QoS, load balancing, DHCP and static routes organises network traffic and keeps services operating predictably. Connection security RUTC41 supports a firewall, DMZ, MAC and IP address filtering, and protection against DDoS, increasing control over traffic in the company network. Authentication mechanisms are also available, such as digital certificates, X.509, TACACS+ and Radius, making the device better suited to environments with higher security requirements. Operation in harsh conditions The industrial router operates in temperatures from -40 to 75°C and humidity of 10-90%, so it is suitable for use in control cabinets, warehouses and technical facilities. The black housing and external SMA antennas make installation easier and help adapt coverage to the installation conditions.
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
