Original part number NIC-GX1 Product name Gembird 1-GIGABIT PCI-Express Fast Ethernet Card, Realtek chipset Producer Gembird Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector RJ45 Type of bus connector PCI-E 1x Wake On Lan function no data Operating system Microsoft WindowsMac OSUNIXLinux Supported protocols and standards IEEE 802.3ab - 1000BaseTIEEE 802.3u - 100BaseTXIEEE 802.1Q-in-Q - VLAN TagIEEE 802.1p - PriorityIEEE 802.3x - Flow Control Chipset Realtec Additional information Single STP RJ45 port for either1000 Mbps, 100 Mbps or 10 Mbps network speedsSupports speed auto-negotiation, pair swap/polarity/skew correctioncrossover detectionAutomatic IRQ and I/O address setupSupports Full Duplex flow control (IEEE 802.3x), power saving, Wake-on-LANremote wake-up, PCI Message Signaled Interrupt (MSI)Chipset: RTL8111CDimensions: 120 x 80 x 20 mm, x1 slotNet weight: 32 g
Ethernet LAN (RJ-45) PoE ports quantity 4 Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Auto MDI/MDI-X Yes MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Ventilation fan(s) No Power over Ethernet (PoE), W 120 SFP+ slots quantity 1 Maximum data transfer rate, Gbit/s 7.44 Switch type Unmanaged Ports quantity 5 Storage temperature range (T-T), °C -40 - 70 °C Jumbo Frames support Yes Supported data transfer rates 10/100/1000 Mbps Weight, g 500 Dimensions W x D x H, mm 29.1 x 107.3 x 139 Operating temperature range (T-T), °C 0 - 50 °C Power consumption, W 44.5 Switch layer L2/3 Switching capacity, Gbit/s 128 MAC address table, entries 16000 Power over Ethernet (PoE) Support Yes
Incorporating the latest Multi-Stream Transport (MST) technology, the CS1922M 2-Port USB 3.0 4K DisplayPort MST KVMP Switch is the world's first DisplayPort KVM switch with a built-in MST hub. The CS1922M enables users to adopt two console displays from a single DisplayPort 1.2 video source, providing an extended desktop mode and splitter mode at resolutions up to 4K for multitasking across two displays while reducing bulky cable connections.To meet the ever-increasing demand for high-speed peripheral data transmissions, the CS1922M integrates a USB 3.1 Gen 1 hub to deliver unprecedented data transfer rates up to 5 Gbps - allowing you to maximize multitasking operations.The unique independent switching feature allows the KVM switch's focus to be on one computer while its USB peripheral focus is on another computer. This eliminates the need to purchase a separate USB hub or stand-alone peripheral sharer - such as a print server or splitter. Additionally, the switch allows you to share the audio from each of the connected computers and even allows HD audio transmitted through a DisplayPort source.With a rich feature set, the CS1922M is designed to exceed the requirements such as excellent video quality and ultra-fast data transmission speed for gaming, graphic design, animation, and video-editing applications.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
- Add one Gigabit Ethernet port- Add three 5 Gbps USB 3.0 ports- PC and Mac compatible- Flexible USB 3.0 cable accommodates most installations- Backward compatible with USB 2.0 and 1.1 ports- Full power for power hungry USB devicesPortide hulk4Jaoturi liidesedUSB 1.1,USB 2.0,USB 3.0 (3.1 Gen 1) Type-AUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk4Ethernet LAN (RJ-45) pordid1Andmeedastuskiirus5000 Mbit/sIsehäälestuvJahSertifikaatCE, FCCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3xToide USB kauduJahSisendpinge100-240Sisendsagedus50/60Väljundvool0,5 AToote värvValgeToetatud Windowsi operatsioonisüsteemidJahToetatud Maci operatsioonisüsteemidJahKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)0 - 90 °CLaius105 mmSügavus40 mmKõrgus25 mmKaal64 g
Built to Fight Noise With Prism Active RF Filter The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronization) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Using airMAX ac technology, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). It also offers the following features:All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the PrismStation 5AC for your specific installation requirements:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mounting30°60°90°Management Wi-Fi Radio The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Enhanced Co-Location Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.Improved Noise Immunity PrismStationTM AC blocks or spatially filters out noise,so noise immunity is improved.This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Hight MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The PrismStationTM AC also gets maximum gain out of the smallest footprint. Beam Performance Perfected The PrismStationTM can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Now with airOS®8 Sporting an all-new design for improved usability, airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX® ac products
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1 x RJ45 2-ühenduse tüüp: 1x male USB C-type värv: Space Gray Lisaandmed: 1x USB-C 3.1 ühenduspesa, for connecting to a laptop, tablet või PC, 1x Ethernet GLAN RJ-45 port toetab 10 / 100 / 1000 Mbps speeds, toetab Wake-on-LAN, Jumbo frame Kuni 9k bytes, detection of kaabel crossover, tugi IEEE 802.3az (Energy Efficient Ethernet, IPv4/IPv6 pack Checksum Offload Engine (COE) to punaneuce CPU loading, kiibistik Realtek RTL8153, Powered through USB bus, no power adapter is needed, OS Lisainfo: i-tec USB-C Metal Gigabit Ethernet Adapter
Features- 4-port DVI KVMP Switch with USB 2.0 and 2.1 Surround Sound Audio- One USB console controls four computers and two additional USB devices- 2-port built in USB 2.0 hub fully compliant with the USB 2.0 specification- Full bass response for high quality 2.1 channel surround sound systems- Computer selection via front panel pushbuttons, hotkeys, and mouse- Multiplatform support – Windows, Linux, Mac, and Sun*- Independent switching of KVM, USB, and Audio focus- DVI digital and analog monitor support – fully compliant with the DVI specifications- Superior video quality: 1920 x 1200 @ 60Hz (Single Link); 2560 x 1600 @ 60Hz (Dual Link)- nVidia 3D Vision Ready: Works with 120Hz LCD monitors and active shutter glasses to create a 3D environment with maximum resolution of up to 1920 x 1080- HDCP compatible- Support widescreen resolutions- Video DynaSync™ – Exclusive ATEN technology that eliminates boot-up display problems and optimizes resolution when switching between ports- Power on detection – if one of the computers is powered off, the switch will automatically switch to the next powered-on computer- Console mouse port emulation/bypass feature that supports most mouse drivers and multifunction mice- Console keyboard emulation/bypass feature that supports most gaming / multimedia keyboards- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping – supports English, Japanese, and French keyboards- Auto Scan Mode for monitoring all computers- Firmware upgradable* PC keyboard combinations emulate Mac/Sun keyboards* Mac/Sun keyboard work only with their ownPackage Contents- 1x CS1784A USB DVI Dual Link KVMP™ Switch- 4x 2L-7D02UD DVI-D KVM Cable Sets- 1x 0AD6-1605-24EG Power Adapter- 1x User InstructionsKontrollitavate arvutite arv4Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-IUSB 2.0 portide arv2DC-pistikJahMaksimaalne resolutsioon2560 x 1600 pikslitMaksimaalne digitaalresolutsioon1920 x 1200 pikslitMaksimaalne analoogresolutsioon1920 x 1080 pikslitToote värvMustLED-indikaatoridJahMaterjalMetallSisseehitatud ekraanEiVõimsustarve (tüüpiline)10 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius87 mmSügavus270 mmKõrgus55 mmKaal930 gKiirpaigaldusjuhendJahJuhendJahÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)270 x 87 x 55 mm
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT 6, Shielded, FTP-shielded 4 twisted-pair kaabel, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbepunane fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
Features- One PS/2-USB VGA console controls two VGA interface computers.- Dual Interface - supports computers with PS/2 or USB keyboards and mice- Computer selection via front panel pushbuttons, hotkeys, and mouse- Multiplatform support - Windows, Linux, Mac, and Sun- Superior video quality - 2048 x 1536; DDC2B- Video DynaSync™ - Exclusive ATEN technology eliminates bootup display problems and optimizes resolution when switching between ports- Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping - supports English, Japanese, and French keyboards- Gaming keyboard support- Auto Scan Mode for monitoring all computers- Firmware upgradable- Non-powered* 1. PC keyboard combinations emulate Mac/Sun keyboards* 2. Mac/Sun keyboard work only with their own computersPackage Contents- 1x CS82U PS/2-USB KVM Switch- 2x 2L-5302UP PS/2 USB KVM Cables- 1x User InstructionsKontrollitavate arvutite arv2Klaviatuuri pordi tüüpUSB, PS/2Hiire pordi tüüpUSB, PS/2Videopordi tüüpVGAPS/2-portide kogus2USB 2.0 portide arv2DC-pistikJahVGA (D-Sub) portide arv3Maksimaalne resolutsioon2048 x 1536 pikslitLED-indikaatoridJahSisseehitatud ekraanEiSkaneerimisintervall20 sVõimsustarve (tüüpiline)1,1 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahSertifikaatCN ZL 99213861.2, CN ZL 01260527.1, CN ZL 02301203.X, US 6564275, US 6464197, TW 174875, TW 081926Laius87 mmSügavus140 mmKõrgus55 mmKaal540 gKaablid kaasa arvatudKVMÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)87 x 140 x 55 mmÜhilduvad operatsioonisüsteemidWindows, Linux, Mac, SunToitenõuded5VDCTehnilised omadusedDDC2BEkraani resolutsioon sagedusel2048 x 1536 @ 60 Hz
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5 Lisaandmed: Practical pass-through design for easy crimping, Gold plated 2-fork internal contacts for both solid ja stranded LAN kaablid, sobib conductors of max. 24 AWG värv: Transparency
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.* - Mikrotik LtAP mini sold separately!
• 8 Gigabit PoE ports and 4 Gigabit SFP slots • Total PoE power budget: 240W, up to 30W per port • Supports IPv4/IPv6 network operation • Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az) • Supports Operations, Administration, and Maintenance (OAM) mechanisms • Ethernet Ring Protection Switching (ERPS) for Ethernet ring topologies with sub-50 ms failover capabilities • 40°C to 75°C operating temperature range • Redundant power inputs with Terminal Block
• IEEE 802.3af/at PoE compliant to simplify deployment and installation • 10/100/1000Mbps wire speed transmission and reception • Auto-detection and protection of non-standard PoE devices • IEEE 802.3x Flow Control protects against lost packets for reliable data transmission • Total PoE power budget: 120W, up to 30W per port
