QuSpot for Teltonika RUTX09 Integrated outdoor multi band LTE omni antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX09 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded GPS antenna. If you use RUTX09 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
Unified AC2600 Wave2 Dualband Access Point, IEEE 802.11a/b/g/n/ac Standard, 5GHz (DFS/TPC) und 2,4GHz Frequenzbereich, bis zu 800 Mbit/s Datentransfer bei IEEE 802.11n und bis zu 1733 Mbit/s bei IEEE 802.11ac
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
16 x Gigabit PoE+ ports 240W PoE power budget 32Gbps switching capacity Hardened IP30 rated metal switch Includes DIN-rail and wall mounts Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm output triggered by power failure Power supply sold separately (models: TI-S24048, TI-S48048) TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. PoE Power A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power. Fault Tolerance The industrial PoE switch features redundant power inputs with output alarm relay. Industrial Design Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration and shock, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). PoE+ Power Budget Supplies up to 30W of PoE/PoE+ power per port on the industrial PoE switch with a 240W PoE power budget Network Ports Industrial PoE switch with 16 Gigabit PoE+ ports DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 32Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / TI-S48048) Alarm Relay Alarm relay triggered by power failure of primary and/or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Extreme Temperatures Industrial PoE switch rated for an operating temperature range of -40 – 75° C (-40 – 167° F) Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point on the industrial PoE switch protects equipment from external electrical surges
4 x Gigabit PoE++ ports (up to 95W) 4 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 240W PoE power budget 20Gbps switching capacity Internal power supply Fanless design for silent operation Sturdy 1U 19” rack mountable metal housing
See Delocki jaotur võtab DisplayPort-signaali vastu arvutist või sülearvutist ja jagab selle kolmele ühendatud ekraanile. Seega saab ühe DisplayPort-ühenduse abil kasutada kolme DisplayPort-monitori. Multi-Stream Transport (MST) Toode on MST-keskjaam ja toetab DisplayPort'i laiendatud töölaua konfiguratsiooni. See võimaldab kombineerida mitu monitori üheks suureks ekraaniks. Kahe režiimi DP++ Väljundid on kaherežiimilised (DP++), nii et sobivate adapteritega saab ühendada HDMI- või DVI-monitore. Kõrge eraldusvõime Tänu DisplayPort 1.4 suuremale ribalaiusele on toetatud kokku kolm 4K resolutsiooniga (3840 x 2160) monitori. Spetsifikatsioon Ühendused: Sisend: DisplayPort: 1 x DisplayPort isane 1 x USB Type Micro-B female (5 V toiteallikas): 1 x USB Type Micro-B female (5 V toiteallikas) Väljund: 3 x DisplayPort emasühendus: 3 x DisplayPort emasühendus Kiibistik: VMM5330 DisplayPort 1.4 spetsifikatsioon DisplayPort väljund toetab Dual Mode DP++ Aktiivne muundur, Single- / Multi-Stream Transport Hub (SST / MST) Funktsioonid: Peegeldatud või laiendatud (ainult Windows) Toetab Display Stream Compression 1.2 (DSC) Toetab HDR Toetab HDCP 1.4 ja 2.2 Maksimaalne resolutsioon (sõltuvalt süsteemist ja ühendatud riistvarast): DisplayPort 1.4 Multi-Stream Transport (MST): 2 ekraani: kuni 3840 x 2160 @ 60 Hz 3 kuvarit: kuni 3840 x 2160 @ 30 Hz + 1 x kuni 3840 x 2160 @ 60 Hz DisplayPort 1.4 Multi-Stream Transport (MST) + DSC: 2 kuvarit: kuni 5120 x 2880 @ 60 Hz 3 ekraani: kuni 3840 x 2160 @ 60 Hz Audio- ja videosignaalide edastamine Värv: must Kaabli pikkus ilma pistikuteta: ca. 12,5 cm Mõõtmed ilma kaabliteta (LxSxK): ca. 105 x 43 x 14 mm Süsteeminõuded Windows 7/7-64/8.1/8.1-64/10/10-64 Vaba DisplayPort-liitmik Laadija 1 x USB Type-A 5 V / 2 A Pakendi sisu DisplayPort jaotur USB toitekaabel, pikkus: ca. 0,5 m Kasutusjuhend
This USB extension cable by Delock can be connected to a USB port of your computer and enables an extension of 10 m. You can connect up to four USB devices to the Hub. In case these USB devices do not have an own power supply you may need an optional power supply, e.g. Navilock 41337, which can be connected to the Hub.
