- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support
10GBASE-SR SFP+ Multi Mode LC Module 550 m (1,804 feet) with DDMTEG-10GBSR (Version v1.0R)Hot-pluggable SFP+ transceiverSFP+ MSA compliantSupported throughput up to 10.5 GbpsMulti Mode fiber for distances up to 550 m (1,804 feet)850 nm wavelengthDuplex LC connectorDigital Diagnostics Monitoring (DDM) supportOperating temperature: 0 to 70 °C (32 to 158 °F)Single 3.3 V power supply
TRENDnet’s hot-pluggable TEG-10GBS10, 10GBASE-LR SFP+ Single Mode LC Module, works with a MSA compliant SFP+ slot. This Single Mode transceiver spans distances up to 10 km (6.2 miles), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.Hot-Pluggable SFP+Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slotFiber WavelengthCompatible with Single Mode 1310 nm transmissionsFiber DistanceSupports networking for distances up to 10 km (6.2 miles)Fiber PortLC-type duplex connectorDDM SupportDigital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltagePower SupplySingle 3.3 volt power supplyOperating TemperatureRated for an operating temperature range of 0 to 70 °C (32 to 158 °F)StandardsCompliant with SFF-8431, SFF-8432, SFF-8472, 10G FC Rev 4.0, FC-PI-4 Rev 7.0, and IEEE802.3ae 10GBASE-LR/LWAndmeedastuskiirus (maksimaalne)10000 Mbit/sLiidese tüüpSFP+Fiiberoptiline pistmikLCVõrgustandardidIEEE 802.3aeSFP-transiiveri tüüpSRKiudjuhtme portide arv1Lainepikkus1310 nmKaabli tüüpÜksikrežiimHot-Plug tugiJahMaksimaalne ülekandekaugus10000 mVõimsustarve (tüüpiline)0,522 WKasutamistemperatuur (T-T)0 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius14,8 mmSügavus56,5 mmKõrgus11,8 mmKaal22 gSertifikaatCE, FCC
TRENDnet’s 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG102, has eight gigabit PoE+ ports with a 240 W PoE power budget, plus two gigabit RJ-45 / SFP shared ports. Users are able to connect eight PoE+ devices to the switch, while still providing two gigabit ports for additional network connections. The switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75°C (-40° – 167°F) for industrial environments.PoE Power A 240 W PoE+ power budget supplies up to eight Power over Ethernet devices with PoE+ power.Fault Tolerance Features dual redundant power inputs with output alarm relay.Industrial Hardened Design Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration, shock, and operate within a wide temperature range of -40 – 75°C (-40 – 167°F). Full PoE+ Power Budget Supplies up to 30 W of PoE / PoE+ power per port with a 240 W PoE power budgetNetwork Ports 8 Gigabit PoE+ ports plus 2 Gigabit RJ-45 / SFP shared portsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 20 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / 48VDC3000)Alarm Relay Alarm relay triggered by power failure of primary and / or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75°C (-40 – 167°F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Using airMAX M5 technology, the IsoStation M5 supports up to 100+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation M5 comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation M5 for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
R11e-5HacD is Mikrotik new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS.The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Original part number NP0004 Product name LOGILINK - Patch panel UTP CAT6 24-ports black Producer LogiLink Class of product Complete outlet Type of connector RJ45 Number of ports 24 Wiring type twisted-pair cable Category 6 Usage indoor Additional information metal coverSuitable for mounting in 19 "Standards: CAT 6 8P8C, ROHSCable installation via LSA plugsUp to 250 MHzDimensions: 500x2x1 mm
Original part number DN-93904 Product name DIGITUS CAT 5e, Class D, RJ45 Patch Cable Adapter, shielded Producer DIGITUS Class of product Complete outlet Type of connector 2 x RJ-45 1 x RJ45 Number of ports 3 Wiring type SSTP - Screened Shielded Twisted Pair Usage indoor Colour Silver-grey
Original part number UC-C6-CMR Product name Ubiquiti UniFi Indoor Cable Cat6 CMR UTP 23 AWG 304m, Up to 10G Ethernet Producer Ubiquiti Networks Class of product
The new DIGITUS® Category 6 Class E, U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.Kaabli pikkus10 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Konnektori suguMeessoost/meessoostKaabli kateU/UTP (UTP)Kaabli klassEKaabli värvHallMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7Kasutamistemperatuur (T-T)-20 - 60 °CPakendi tüüpPlastkott
Surface mounted data box is designed for use in high-speed data communication networks. Is a passive part structured cabling used in subscriber's points. Socket is equipped with two unshielded RJ-45 ports category 6. - Two unshielded RJ-45 ports category 6. - Universal IDC/LSA connectors in accordance with T568A/B. - Allows connection of conductors 26-22 AWG. - Very simple and quick assembly. - Color: white.
48 x Gigabit PoE+ ports4 x Shared Gigabit ports (RJ-45 or SFP)740W PoE power budgetEasy-to-use web-based management interfaceSupports IPv6, LACP, VLAN, QoS, and IGMP SnoopingBandwidth control per portPrivate and Voice VLAN supportSmart Fan104Gbps switching capacityIEEE 802.1p QoS with queue scheduling support
24 x Gigabit PoE+ ports4 x Shared Gigabit ports (RJ-45 or SFP)370W PoE power budgetEasy-to-use web-based management interfaceSupports IPv6, LACP, VLAN, QoS, and IGMP SnoopingBandwidth control per portPrivate and Voice VLAN supportSmart Fan56Gbps switching capacityIEEE 802.1p QoS with queue scheduling support
TRENDnet’s high efficiency 240 W Single Output Industrial DIN-Rail Power Supply, model TI-S24048 (Mean Well SDR-240-48), supplies up to 240 Watts (48 V, 5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.240 Watt PowerProvides up to 240 Watts (48 V, 5 A) of power for PoE devices such as switches, network cameras, and access pointsActive PFCThe built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive powerOverload ProtectionOverload/short circuit/over voltage/over temperature protectionFull Load TestThis power supply undergoes a 100 % full load burn-in testPassive CoolingCooling by free air convectionDIN-Rail MountMetal enclosure with integrated DIN-rail mountExtreme TemperaturesRated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)Safety CertificationsCertified for UL 508 and TUV EN60950-1Electro Magnetic Emission/ImmunityCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approvedVibration ResistantRated for vibrationLED IndicatorLED indicator confirms power to the unitKoguvõimsus240 WAC-sisendpinge100 - 240AC-sisendsagedus50 - 60Sisendvool1.8Toite kaitsefunktsioonidÜlepinge, Ülekoormus, LühisOtstarveVõrgulülitiKeskmine tõrkeintervall (MTBF)1693000 hToote värvMetallikLED-indikaatoridJahKasutamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius40 mmSügavus125 mmKõrgus114 mmKaal1,03 kgSertifikaatCE, UL, TUV
TRENDnet’s high efficiency 120 W Single Output Industrial DIN-Rail Power Supply, model TI-S12048 (Mean Well SDR-120-48), supplies up to 120 Watts (48 V, 2.5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.120 Watt PowerProvides up to 120 Watts (48 V, 2.5 A) of power for PoE devices such as switches, network cameras, and access pointsActive PFCThe built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive powerOverload ProtectionOverload/short circuit/over voltage/over temperature protectionFull Load TestThis power supply undergoes a 100 % full load burn-in testPassive CoolingCooling by free air convectionDIN-Rail MountMetal enclosure with integrated DIN-rail mountExtreme TemperaturesRated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)Safety CertificationsCertified for UL 508 and TUV EN60950-1Electro Magnetic Emission/ImmunityCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approvedVibration ResistantRated for vibrationLED IndicatorLED indicator confirms power to the unitToote tüüpToiteplokkToote värvMetallikLED-indikaatoridJahToite kaitsefunktsioonidÜlepinge, Ülekoormus, LühisKeskmine tõrkeintervall (MTBF)2899000 hSertifikaatCE, UL, TUVKoguvõimsus120 WAC-sisendpinge100 - 240AC-sisendsagedus50 - 60Sisendvool1.8Kasutamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 90 protsentiLaius40 mmSügavus125 mmKõrgus114 mmKaal670 g
TRENDnet’s 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. Ethernet Distance Supports networking distances up to 100m (328 ft.) Connection Interface 1000BASE-T RJ-45 gigabit port Hot-Pluggable SFP Hot-pluggable SFP compatible with a MSA compliant SFP slot Operating Temperature Operating temperature range of 0°– 70 °C (0° – 158 °F)
Hardened IP30 rated SFP to Gigabit UPoE converterSFP port accommodates Multi or Single Mode fiberUp to 40 km fiber networking distances with the TI-MGBS40 SFP moduleProvides up to 60W for PoE, PoE+ and UPoE compliant devicesIncludes DIN-rail and wall mountsWide operating temperature range -40 to 75 °C (-40 to 167 °F)Overload current protectionPowers supply sold separately (model TI-S12048)
TRENDneti TI-UPG62 on usaldusväärne IP30 kaitsevaba DIN-redeli Ultra PoE-lüliti, mille vastupidav korpus on mõeldud ekstreemseteks tööstuskeskkondadeks. See pakub 4 Gigabit Ultra PoE-porti, 240 W PoE-võimsuse eelarvet, kahte spetsiaalset SFP-pesa ja 12 Gbps kommutatsioonivõimsust. Kaks üleliigset toitesisendit ja toitealarmi relee. Ultra PoE 240 W PoE-võimsuse eelarve varustab kuni nelja Power over Ethernet seadet PoE (15,4 W), PoE+ (30 W) või Ultra PoE (60 W) võimsusega. Riketolerantsus Omab kahte välistest toiteallikatest saadavat redundantset toitesisendit (primaarne ja RPS) ning väljundhäirereleed, mis annab märku sisendtoite rikke korral. Tööstuskindla konstruktsiooniga Varustatud vastupidava IP30 klassifikatsiooniga korpusega ja kavandatud taluma suurt vibratsiooni, lööki, kaitset ESD / EMI / ülepinge eest ning töötama laias temperatuurivahemikus (- 40 - 75 °C) karmides tingimustes. PoE-võimsuse eelarve 240-vatine PoE-võimsuse eelarve varustab kuni nelja Power over Ethernet seadet PoE (15,4 W), PoE+ (30 W) või Ultra PoE (60 W) võimsusega. Võrgupordid 4 x Gigabit Ultra PoE porti ja 2 x spetsiaalset SFP-pesa. DIN-riba / seinakinnitus IP30 klassifikatsiooniga metallist korpus koos kaasasoleva DIN-riba ja seinakinnituse riistvaraga Lülitusvõimsus 12 Gbps kommutatsioonivõimsus Redundantne toide Kaks üleliigset redundantset toitesisendit koos ülekoormusvoolukaitsega (toiteallikad müüakse eraldi, mudel TI-S24048). Häirerelee Häirerelee, mis käivitub esmase ja/või üleliigse toiteallika voolukatkestuse korral. Jumbo Frame Saadab suuremaid pakette ehk Jumbo Frame'i (kuni 9 KB), et suurendada jõudlust. Hinnatud äärmuslikele keskkondadele Vastupidav IP30 klassifikatsiooniga korpus, mis on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama laias temperatuurivahemikus (- 40 - 75 °C), mis on mõeldud karmide keskkondade jaoks. Elektromagnetiline vastavus Vastab FCC osa 15 B-osa A-klassi ja CE EN 55022 A-klassi standarditele. Sertifikaadid Hinnatud infotehnoloogia (ITE) seadmetele (EN55022/24); tööstus-, teadus- ja meditsiiniseadmetele (ISM) (EN55011). Löögi- ja vibratsioonikindlus Hinnatud löökidele (IEC 60068-2-27), vabalangemisele (IEC 60068-2-32) ja vibratsioonile (IEC 60068-2-6). Maanduspunkt Maanduspunkt kaitseb seadmeid väliste vooluülekannete eest.
