Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
Wireless Router, 3-pack, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz, Included Accessories 3 Power Adapters;1 RJ45 Ethernet Cable, Dimensions 190.5 x 90.7 x 90.7 mm
XS1935 Series As businesses adopt cloud applications, AI-driven workloads, and high-definition collaboration tools, network performance is critical. With WiFi 7 delivering speeds beyond 10 Gbps, the demand for faster, more efficient wired infrastructure is growing. Zyxel's XS1935 Series Switch is built for modern networks with future-ready technology. Smart fan design delivers near silent and stable Multi-Gig 10G operation.Unlock the Future of Networking with 10G Multi-Gig SwitchesA 10G Multi-Gig switch provides the flexibility to support 100M, 1G, 2.5G, 5G, and 10G connections, allowing businesses to upgrade their network gradually without overhauling their entire infrastructure. This ensures that high-performance devices such as servers, NAS, workstations, and next-gen WiFi 7 access points can operate at their full potential without bottlenecks.
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
SAVIO AK-69 USB-C 3.1 Gen 1- SATA 2,5" Adapter USB-C adapter AK-69, is a cable characterized by high quality and reliability. You can transfer data, charge devices, and connect accessories. Thanks to the Plug&Play function, the electronic accessory does not require installing additional drivers. Moreover, it is compatible with all Windows, macOS, and Linux operating systems. Practicality The AK-69 adapter from Savio, thanks to its USB-C end, is used to transfer data from one device or drive to another. It is especially useful in a situation where you have an older type of SSD (SATA) drive and you want to plug it into a new laptop, to rip the files you need. AK-69 can be used as an adapter, allowing you to create a 2.5" drive into an external data storage device. Fast data transmission The AK-69 offers high-speed data transmission of up to 5 Gbps over the SATA connector. This is a serial interface used in computers for communication between the processor and storage and optical drives. The speed offered is perfect for fast, efficient, and hassle-free file exchange. Practicality and convenience Savio's adapter features convenience in use, thanks to its 25 cm long cable. It is long enough to provide flexibility of use but short enough to be easy to carry and not get tangled. Supporting 2.5" HDDs and SSDs with the USB-C adapter involves connecting the drives to a computer or other device with a USB-C port. This is done without having to place them internally in the enclosure. Technical specifications: Data transmission: SATA III up to 5 Gbps and SATA II up to 3 Gbps Hard drive support: up to 10 TB Supported drives: 2.5" Cable length: 25 cm. Plug and Play: Yes, no additional drivers are required Dimensions: 45 × 42 × 11.5 mm Weight: 19 g
The TP-Link PG2400P KIT V1 powerline adapter kit enhances connectivity with its advanced features and reliable performance. Engineered for high-speed Internet access, it boasts a data transfer rate of 1428 Mbps, making it suitable for streaming 8K HD videos, online gaming, and large file transfers. With G.hn and Gigabit Ethernet support, it ensures a fast and stable network connection throughout your home or office.Ease of use is at the forefront of the PG2400P KIT V1's design. Thanks to its Plug-and-Play compliance and convenient pair button, setting up your network is straightforward, eliminating complex installation processes. The kit also features a power-saving mode, significantly reducing energy consumption while maintaining high performance. This, coupled with its wall-pluggable form factor, allows for flexible placement without worrying about clutter.In summary, the TP-Link PG2400P KIT V1 is a comprehensive solution for enhancing your network's reliability and performance. Whether for work or entertainment, it delivers consistent, high-speed connectivity that can keep up with your digital lifestyle.
Deco M5 uses the latest technology to create a wireless mesh to paint your home in Wi-Fi. Mesh technology relies on several units working together to replace your router and create seamless Wi-Fi in every room. Each Deco mesh router can work independently, with in the network, to cover up to 4,500 sq. ft. of fast Wi-Fi. For even more coverage, you can use up to 9 Deco M5 units on a single network.
MikroTik LHG LTE18 Kit LHGGM&EG18-EA No Wi-Fi, Pole and Mast Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 1, 1 Gbps (RJ-45) ports quantity 1, Mesh Support No, MU-MiMO Yes, 3G/4G data sharing
SFP1-BIDI-SU 1.25 Gb/s Simplex SC/UPC Module - 20 km AThe SFP1-BIDI-SU module enables a bidirectional fiber-optic connection using only a single single-mode fiber. BIDI technology uses 1310 nm and 1550 nm wavelengths to separate data transmission and reception, reducing the number of fibers required to establish a connection.This solution is suitable both for building new fiber links and expanding existing infrastructure. It allows available optical fibers to be used more efficiently without the need for separate fibers for transmission in each direction.Gigabit Ethernet connection up to 1.25 Gb/s A transmission rate of up to 1.25 Gb/s enables stable Gigabit Ethernet connections between switches, routers, media converters, and other devices equipped with compatible SFP ports.The module can be used, among other applications, to connect distribution points, devices located in different parts of a building, and infrastructure components situated farther apart. Transmission over single-mode fiber helps maintain signal stability even over longer distances.Simplex SC connector for commonly used installations The Simplex SC connector makes it easy to connect the module to fiber-optic links terminated with a standard SC connector. This type of connection is commonly used in fiber distribution frames, telecommunications cabinets, and distribution points.Transmission range matched to the fiber link The SFP1-BIDI-SU is available in versions supporting transmission distances of up to 3 km or up to 20 km. This makes it easier to select the appropriate module for both shorter inter-building connections and more extensive fiber-optic links.The transmission range can be selected according to the link length, the parameters of the fiber used, and the overall optical power budget. This makes it possible to create a solution tailored to the actual network requirements without using a module with an unnecessarily long transmission range.Easy expansion of fiber-optic infrastructure The compact SFP form factor allows the module to be installed directly in a compatible network device. Hot-swappable operation makes it easier to expand or modify the connection configuration without rebuilding the entire infrastructure.The SFP1-BIDI-SU is a practical choice wherever Gigabit Ethernet transmission, efficient use of available fibers, and compatibility with commonly used SC connectors are important.BIDI modules are sold in A and B versions and operate only as a complementary A + B pair. The TX and RX directions are reversed between the two versions: BIDI A: TX - 1310 nm wavelength; RX - 1550 nm wavelength. BIDI B: TX - 1550 nm wavelength; RX - 1310 nm wavelength. A connection using two modules of the same version will not work.
The HPE Networking Comware 5150L 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W Switch offers a robust networking solution tailored for business environments. With 48 ports supporting 10/100/1000Base-T and Power over Ethernet (PoE+) capabilities, this switch ensures efficient power delivery alongside data transmission. The stackable design supports up to 9 units, enabling seamless scalability as network demands grow.Equipped to handle high-performance networking tasks, its switching capacity reaches 176 Gbps with a throughput of 130 Mpps and minimal latency of < 5 µs at 1 Gbps. This switch also supports advanced features such as Intelligent Resilient Fabric Technology (IRF), quality of service (QoS), and sFlow, providing enhanced management and performance optimization for enterprise networks. Remote management capabilities via CLI, SNMP, and RestAPI ensure streamlined network administration, making this switch an ideal choice for modern network infrastructures.
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
• Jaga oma 4G LTE võrku mitmete WiFi seadmetega ning naudi allalaadimise kiiruseid kuni 300 Mbps. • Toetab TP-Link OneMesh silmusvõrk tehnoloogiat • Integreeritud antennid tagavad stabiilse ja sujuva ühenduse. • Ei vaja mingit seadistamist - sisesta (Micro) Sim kaart ja hakka kasutama. • LAN/WAN pesa tagab paindlikkuse.
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
• Laua peale asetatav ruuter Must • Kaks sagedusala (2,4 GHz / 5 GHz) Wi-Fi 6E (802.11ax) 1800 Mbit/s • Gigabit Ethernet • Ethernet WAN DSL WAN • Ethernet LAN (RJ-45) pordid: 4 • USB port • Veebipõhine haldus • MIMO Tehnoloogia MU-MIMO TP-Link Archer VX1800v, Wi-Fi 6E (802.11ax), Kaks sagedusala (2,4 GHz / 5 GHz), Ethernet LAN, ADSL, Must, Laua peale asetatav ruuter
GS1100 Switchable Series 16 GbE Unmanaged SwitchThe Zyxel GS1100 Switchable Series is designed for SB or SMB markets, offering instant Gigabit connectivity and plug-and-play simplicity. With "Simplicity" design in mind, these switches feature intuitive DIP switches, allowing users to toggle settings for handy features with just a single touch. Instant Gigabit speeds with easy plug-and-play Intuitive DIP switches toggle convenient features in seconds Slim, space-saving design for desks, walls, and tight server cabinets Energy-efficient and fanless for silent, eco-friendly networking DIP Switch to control your networkThe GS1100 Switchable Series feature an intuitive DIP switch that allow users to enable or disable handy features in seconds without requiring access to a management interface. You can utilize this DIP Switch to turn on/off loop prevention, IEEE 802.3az, and LED easily.Gigabit to the desktopThis Series offers 16-port Gigabit non-blocking wire-speed transmission. With superior Gigabit performance and flexible form factor options, it is the ideal solution for bandwidth-intensive applications in small office environments.
The Ugreen DHP4300 Plus NAS is a versatile network storage system for both home and professional use. It enables centralized storage, management, and backup of data, providing a reliable solution for file sharing and backup tasks on the local network. Its compact design and flexible deployment options make it ideal for home offices and small office environments. With 2FA (two-factor authentication), an essential layer of security is added to your data, drastically minimizing the risk of unauthorized access and protecting against modern cyber threats. Type NAS A NAS shines when you want one place for files, photos, and backups—accessible to multiple devices without scattering copies across laptops and external drives. That centralization makes everyday tasks easier: shared folders, automatic backups, and a consistent library for work documents or media collections. It’s also a resilience play—having a dedicated storage system reduces the chance that a single lost laptop or failed drive turns into a painful data-loss story. For a home office or small team, the practical advantage is control: you keep the data on your own network while still making it easy to access and manage. color black EAN code 6941876286607 Manufacturer's No. 85660 Device type NAS The designation USB 3.2 Gen 1 corresponds to the earlier designations USB 3.1 Gen 1 and USB 3.0. Storage available, not installed Connections 1x HDMI, 1x RJ-45 (LAN), 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Features NFC capability, Further information on the operating system: UGOS Pro Dimensions: Width: 15.5 cm x Height: 21.57 cm x Depth/Length: 15.5 cm
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
• BE3600 Dual-Band Wi-Fi 7 Portable Travel Router • 2.5G Multi-Gig Connectivity • Portable and Durable Design • Enjoy Reliable Network Anywhere • Easily Access Your Files From Anywhere • 24/7 Secure Surfing with VPN Encryption • Power It with a Power Bank
The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.
Aruba CX 6100 lülitite seeria on kaasaegne algtaseme juurdepääsulülitite perekond, mis sobib ideaalselt harukontoritele, keskmise turuga ettevõtetele ja SMB võrkudele. Usaldusväärseks, lihtsaks ja turvaliseks juurdepääsuks loodud Aruba CX 6100 lüliti pakub mugavat juhtmega juurdepääsulahendust ettevõtete võrkudele, mis toetavad asjade Interneti-, mobiili- ja pilverakendusi. Valmistage oma võrk ette ettearvamatuteks nõudmisteks võimsa Aruba ASIC-arhitektuuri ja programmeeritava AOS-CX operatsioonisüsteemiga, mida kasutatakse kogu Aruba CX-i portfellis, et pakkuda ühtsemat ja tõhusamat operaatorikogemust. Sellel lülitite seerial on mugavad sisseehitatud kiired üleslingid, mis toetavad IoT-seadmeid, nagu turvakaamerad ja traadita AP-d. Kompaktne ja ventilaatorita mudel sobib ideaalselt kasutamiseks vaiksetes tööruumides.
• Interactive features: touchback, annotation and blackboarding • Increased collaboration with 2 sources on screen • Run video meetings from your laptop with Button or App • 100% secure, encrypted and cloud-managed
Starlink Standard 4 on kodukasutuseks mõeldud satelliidiinterneti komplekt, mis sobib voogedastuseks, videokõnedeks, mängimiseks ja kaugtööks. See võimaldab luua kiire ühenduse ka kõrvalises asukohas, kui antennil on avatud vaade taevale. • Tüüpiline allalaadimiskiirus 25–220 Mbit/s • WiFi 6 Router Mini • Leviala kuni 204 m² • Kaks Gigabit Etherneti pesa • IP67 ilmastikukindel antenn
The LC Power LC-GAN-65 power adapter meets the charging needs of various devices including tablets, cellular phones, and notebooks. With an output of 65 watts, it provides fast charging solutions while ensuring safety with protection features such as overload protection, short circuit protection, and overvoltage protection. Utilizing GaN technology, this adapter maximizes efficiency and reduces heat generation for reliable performance.Constructed with a compact design, the LC-GAN-65 is suitable for on-the-go use, making it an accessory for travelers and busy professionals alike. The USB charger includes an input connector type of Europlug and offers output options including USB Type-A and USB-C, ensuring compatibility with a range of devices. Furthermore, with automatic voltage adjustment and low electromagnetic interference, this power adapter is engineered for convenience and an enhanced user experience.
