QuSpot for Teltonika RUTX11 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + Bluetooth antenna + place to install Teltonika RUTX11 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX11 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It also has embedded Wi-Fi dualband 2.4 & 5 GHz omni antenna, GPS antenna and Bluetooth antenna. If you use RUTX11 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
QuSpot for Teltonika RUT955 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT955 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi and GPS antenna. If you use RUT955 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
8 x Gigabit ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Wide operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (model: TI-M6024) TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. Integration Flexibility Managed layer 2 features include VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Shock and Vibration Resistant The industrial layer 2 managed switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6). Industrial Design Equipped with an IP30 rated metal enclosure, the industrial layer 2 managed switch operates within a wide temperature range of -40° – 75° C (-40° – 167° F). Network Ports Gigabit ports for high-speed network connectivity and SFP slots for long distance fiber applications Traffic Management Layer 2 Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping, and IP Source Guard provide the industrial layer 2 managed switches with layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure, includes DIN-rail mounting bracket for the industrial layer 2 managed switch Redundant Power Redundant power inputs with overload current protection (power supply sold separately) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power to the industrial layer 2 managed switch Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance from the industrial layer 2 managed switch Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges on the industrial layer 2 managed switch
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Paigaldusstandard: 35mm DIN rööbas Materjal: Madala süsinikusisaldusega teras Kaal: 57g Komplektis olevad kruvid Philipsi paanipea kruvi #6-32×3/16, 2tk Mõõtmed 82 mm x 46 mm x 20 mm
1 x Gigabit PoE++ sisendport4 x Gigabit PoE+ väljundporti60W PoE võimsuse eelarve koos PoE++ Type 4 (90W) sisendvõimsusegaLihtne veebipõhine haldusliidesToetab RSTP-d, VLAN-i, QoS-i ja IGMP SnoopingiVoice VLAN VoIP-rakenduste jaoksRibalaiuse juhtimine pordi kohta10 Gbps lülitusvõimsusKompaktne ventilaatorita disainSeinale paigaldatav metallist korpusNDAA / TAA nõuetele vastav (ainult USA ja Kanada)TRENDneti 5-portiline Gigabit PoE++ Powered Managed Switch koos PoE Passthrough'ga, mudel TPE-B541, saab toite PoE++ lülitist või injektorist, vahelduvvooluadapterit ei ole vaja. Kompaktne PoE++ toitega juhitav kommutaator sisaldab nelja Gigabit PoE+ porti seadmete, näiteks IP-kaamerate, VoIP-telefonide ja traadita pääsupunktide toiteks, mille PoE koguvõimsus on 60 W. Vähendades ebavajalikku lüliti keerukust, on see PoE++ läbipääsetav hallatav kommutaator varustatud haldusfunktsioonidega, nagu VLANid, QoS, PoE juhtimine ja järelevalve.PoE++ toiteallikasEi vaja vahelduvvooluadapterit - see kommutaator saab toite PoE++ kommutaatorist või injektorist. Sellel on neli gigabitilist PoE+ porti PoE-seadmete, näiteks IP-kaamerate toiteks.Kompaktne disainKompaktne, kerge ja ventilaatorita lüliti on mõeldud lauaarvutite ja vaiksete keskkondade jaoks.HaldusHaldusfunktsioonide hulka kuuluvad loopback-tuvastus, RSTP, VLAN, IGMP Snooping ja QoS paindliku võrguintegratsiooni jaoks.PoE++ PoweredPD-toitega lüliti, ei vaja välist toite - toidetakse PoE++ lülitist või injektorist.PoE Passthroug hSee PoE läbipääsu lüliti omab nelja gigabiti PoE läbipääsu porti 60W PoE koguvõimsusega.tKompaktne disain gnKompaktse ja kerge metallkorpuse disainiga PoE++ toiteline lüliti sobib hästi lauaarvutisse paigaldamiseks.nsvõrguhaldus entPoE++ toitega hallatava kommutaatori veebipõhine haldusliides pakub funktsioone loopbacki tuvastamiseks, RSTP, VLAN, IGMP Snooping jaQoSJumbo F rameSaadab suuremaid pakette ehk Jumbo raame (kuni 10KB), et suurendada jõudlust.anceSwitching Cap acity10Gbps lülitus caacityLED Indi catorsLED-indikaatorid PoE++-toitega juhitava kommutaatori konveierportil
Nagu 522E Seda kasutatakse kõikide lõiketööde tegemiseks kergesti ligipääsetavates kohtades. Massiivne pea võimaldab suurt lõikevõimet ja seda iseloomustab vastupidavus. See on standardne pea kuju.
Original part number NPP-C524-002 Product name Gembird 19" patch panel 24 port 1U cat.5e with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 24 Type of connector 1 x RJ45 Category 5e Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 111 mm Width 483 mm Depth 45 mm Net weight 1.7 kg Colour Black
Original part number 560283 Product name Intellinet patch panel 19" 48 ports UTP kat.6 2U Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 48 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Compatible with both 110 and Krone punch-down toolsSupports 22 to 26 AWG stranded and solid wireFor use with unshielded twisted pair (UTP) Cat6 network cableCat6 compliant to ANSI/TIA/EIA 568 B.2-1Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applicationsFinishing network by RJ-45 portsMeets 19" rackmount standards Height 2 U Width 19 inches Net weight 1.27 kg Colour Black
Original part number DN-82020-1 Product name DIGITUS Fast Ethernet Media Converter, SC / RJ45 Producer DIGITUS Class of product Media converter Network protocol and connector type 1 FastEthernet 100BaseTX - RJ45 Network protocol and connector type 2 FastEthernet 100BaseFX - SC Wiring type multimode fibre-optic cable62.5/125 (OM1)multimode fibre-optic cable 50/125 (OM2)UTP - unschielded twisted pair cable, 4 pairsFTP/STP - shielded 4 twisted-pair cable Height 25 mm Width 70 mm Length 93 mm Net weight 0.4 kg Additional information Distance up to 2kmAuto MDI/MDI-XAuto-negotiation of full- and half-duplexCan be mounted in 19" rackin bundle: external AC adapter
The pair of Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. The pair of Dual Wavelength Single Mode LC Type modules must be used together in order to span distances up to 10km (6.2 miles). Two modules are included, each with 1 x 1000Mbps-LX (LC Simplex -Type) Mini-GBIC connector.Andmeedastuskiirus (maksimaalne)1000 Mbit/sLiidese tüüpSFPFiiberoptiline pistmikLCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uSFP-transiiveri tüüpLRKaabli tüüpSingle-modeIsehäälestuvJahKäigultvahetusJahMaksimaalne ülekandekaugus40000 m
TRENDnet’s TI-F10S30 is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates long distance networking with 100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.Andmeedastuskiirus (maksimaalne)200 Mbit/sKonverteri sisendi liides100Base-TXKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3u,IEEE 802.3xEthernet-liidese tüüpKiire EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sEtherneti vaskkaablite tehnoloogia10BASE-T,100BASE-TXEtherneti kiudkaablite tehnoloogia100BASE-FXVoo reguleerimise tugiJahAutomaatne ühildumineJahDupleks-süsteemTäisversioon, PoolFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus30000 mLainepikkus1310 nmKiustruktuurÜksikrežiimToetatud kiudkaabli läbimõõt9/125Lingi bilanss7 dBSisemineEiLED-indikaatoridJahToote värvMustKorpuse materjalMetallRahvusvahelise kaitse (IP) koodIP40DIN-liistu paigaldamineJahSisendpinge12-60Elektritarbimine (max)1,92 WKiirpaigaldusjuhendJahKasutamistemperatuur (T-T)-40 - 75 °CSertifikaatFCC, CELaius60 mmSügavus50 mmKõrgus35 mmKaal90 g
