Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 2 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Powerful Dual LTE Cat 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where loosing connection is not an option. Two LTE modules working simultaneously can provide speeds up to 600 Mbps Instant failover switching 5 x Gigabit Ethernet with speeds up to 1000 Mbps Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps Teltonika Remote Management System compatible Easy to use, secure and feature rich OpenWrt based Operating System
D-Link AC1200. Maximum data transfer rate (2.4 GHz): 300 Mbit/s, Maximum data transfer rate (5 GHz): 867 Mbit/s, Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. WAN-ühendus: Ethernet (RJ-45). Paigutus: Post, Toote värv: ...
EXTREME ATOM AP30 ACCESS/MESH POINT, DUAL RADIO WIFI 5 WITH CLIENT MODE SUPPORT, 1GE FOR BACKHAUL/BRIDGE, BLE, INTEGRATED TYPE C EU-COMPATIBLE POWER PLUG. CE REGULATORY DOMAIN. INCLUDES EXTREMECLOUD IQ CONNECT AND HIVECARE COMMUNITY
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
QNAP TL-D400S. Toote tüüp: HDD/SSD ümbris. Toetatud ketaste arv: 4, Ketta suurus: 2.5/3.5", Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III. Andmeedastuskiirus: 6 Gbit/s. Käigultvahetus. Toote värv: Must, Hall
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
Tüüp: Kommutaator (Switch); Side tüüp: 10 / 100 / 1000 Mbps; Printserver: Ei; Juhtmevaba side standardid: Ei; SIM-kaardi pesa olemasolu: Ei; Liides LAN (RJ-45): On; USB 2.0 liides: microUSB; WAN-port liides: Ei; Portide arv: LAN x 24, SFP+ x 4;...
Mounting type Flat surface mount Device attach mode Clip-on Material ABS + PC plastic Weight 13 g Screws included Self-tapping screws: DIN 14566 (4.2 mm x 32 mm), 2 pcs; Plastic expansion anchors: 6 mm x 30 mm, 2 pcs Dimensions 98.2 mm x 40 mm x 35.5 mm
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
This M.2 docking station by Delock enables the installation of an M.2 PCIe NVMe SSD and it can be connected via USB to the PC or laptop. The included USB cables allow the connection to a free USB Type-A or USB-C™ port. Ideal test equipment The memory is simply plugged into the robust metal housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly. Specification • Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female 1 x 67 pin M.2 key M slot • Chipset: Asmedia ASM2362 • Supports M.2 modules with key M or key B+M based on PCIe (NVMe) • Supports NVM Express (NVMe) • Bootable • Data transfer rate up to 10 Gbps • LED indicator for power and access • 1 x On / Off switch • Metal housing • Dimensions (LxWxH): ca. 49 x 49 x 12 mm • Hot Plug, Plug & Play System requirements • Chrome OS 78.0 or above • Linux Kernel 4.3 or above • Mac OS 10.15.2 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port or • PC or laptop with a free USB Type-A port Package content • M.2 docking station • Cable USB-C™ male to USB-C™ male, length ca. 30 cm • Cable USB-C™ male to USB Type-A male, length ca. 30 cm • User manual
10xSFP28 | 1xConsole | 1x10/100M | Included Accessories IEC cord, IEC cord, K-54 kit, Rack ears for CRS510 | Dimensions 320 x 185 x 44 mm | Unit Net Weight 2 kg
