See kaabel saab toita kahte SATA-seadet ühe vaba 15-pini SATA-pistiku toitepistiku kaudu. Spetsifikatsioon - Liitmik: 1 x SATA 15-pini pistik > 2 x SATA 15-pini pistikupesa - 5 juhtmega versioon (kollane = 12 V, must = GND, punane = 5 V, oranž = 3,3 V). - Kaabli gabariit: 18 AWG - Pikkus ilma pistikuta: ca 15 cm Süsteeminõuded - Toiteallikas, millel on vaba SATA-toiteühendus Pakendi sisu - Toitejuhe
unshielded LAN/network cable to connect network components with 2 RJ45 connectors UV- and water resistant double outer jacket (PE) with gold plated PINs with strain relief and latch protection suitable for 10/100/1000 Mbit-networks pair-sequence acc. to EIA/TIA 568B
The Intel Wi-Fi 6E AX210 (Gig+) adapter is designed to support upcoming Wi-Fi 6E technology and related Wi-Fi Alliance Wi-Fi 6E certification. The product supports dual-stream Wi-Fi in the 2.4GHz, 5GHz and 6GHz bands, and includes improved TCP throughput - exceeding 2Gbps - and future Wi-Fi 6 R2 features, including UL MU-MIMO that improves UL network capacity in dense environments as well as Bluetooth 5.2 support. These new features maximize the benefits of Wi-Fi 6, including Gigabit speed, ultra-low latencies, and enhanced reliability benefits across new radio frequencies exclusive to Wi-Fi 6E devices, and deliver a significant improvement in user experience in dense deployments. Combined with Intel Core processors and exceptional Intel wireless innovations, the Intel Wi-Fi 6E AX210 module can dramatically improve your connected experience at home, work, or on the go.
Habotest HT118E Universal Digital Multimeter True RMS NCVThe Habotest HT118E is a versatile digital multimeter that supports up to 20,000 counts and offers precise measurements of AC/DC voltage, current, resistance, capacitance, frequency and temperature (-20°C to 1000°C). A True RMS function ensures accurate readings, and non-contact voltage detection (NCV) enhances operational safety. A large LCD display with backlight, LED flashlight, automatic range selection, and built-in stand provide comfort in all conditions.Wide range of measurementsThe HT118E multimeter offers measurement of AC/DC voltage up to 1000V, current up to 10A, resistance up to 100MΩ, capacitance up to 2mF and frequency up to 20MHz. The ability to test diodes, check circuit continuity, and measure minimum and maximum values makes it an extremely functional tool for electronics engineers, electricians and do-it-yourselfers.NCV and Live Test functionWith non-contact voltage detection (NCV), you can check the presence of voltage in wires without physical contact. Live Test allows you to quickly detect a live wire, and a built-in audible and light alarm signals the danger.Backlit screen and result memoryThe HT118E features an easy-to-read, 2.7-inch LCD display with dual backlighting that automatically turns orange when 80V or 1A is exceeded, warning of high voltage. A data storage function saves measurement results, and a dynamic bar graph makes analysis easy.Durability and safetyA double fuse protects both the multimeter and the electrical system under test. The housing with protective silicone covering protects against mechanical damage and electric shock. CAT III 1000V and CAT IV 600V safety certifications ensure that the multimeter can be used even at high voltages.Practical solutionsThe built-in LED flashlight allows work in dark rooms, and the stable stand allows comfortable use without holding the meter in your hand. Flexible cable extrusions help keep the work area tidy. Power is provided by 2 AA batteries (included), and an automatic shut-off function after 15 minutes extends the operating time.Included:Habotest HT118E True RMS NCV digital multimeterMeasurement cable x2 (red and black)Thermocouple for temperature measurementAA battery x2Protective cover ManufacturerHabotestManufacturer codeHT118EDC voltage200mV / 2V / 20V / 200V / 1000VAC voltage200mV / 2V / 20V / 200V / 750VDC current200μA / 2000μA / 20mA / 200mA / 10AAC current200μA / 2000μA / 20mA / 200mA / 10AResistance200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ / 100MΩCapacitance20nF / 200nF / 2μF / 20μF / 200μF / 2mFFrequency200Hz / 2kHz / 20kHz / 200kHz / 2MHz / 20MHzTemperature rangefrom -20°C to 1000°CSampling frequency~3 times/secondNumber of counts20 000Display2.7" LCDDual backlightyesLive Test (live wire test)yes, audible and light alarmNon-contact voltage detection (NCV)yes, audible and light alarmDiode testingyesMax/min value measurementyesData storageyesTrue RMyesFrequency response1kHzAutomatic shutdownyesLow battery indicatoryesActive jack indicatoryesLED flashlightyesPower supply2x AA batteryHousing materialABS with silicone protective coverSafety standardsEN61010-1, -2-030, EN61010-2-033, EN61326-1, CAT III 1000V, CAT IV 600V
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (20km/12.4miles) TFC-1000S20 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 20km (12.4miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Original part number 513555 Product name Intellinet Patch Panel 19" 24 ports UTP Cat5e, Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 5e Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Compatible with both 110 and Krone punch-down toolsSupports 22 to 26 AWG stranded and solid wireSolid and reliable terminations for copper cabling featuring a minimum of 3 mm Height 1 U Width 19 inches Depth 48 mm Net weight 0.76 kg Colour Black
The new DIGITUS® Category 6A U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6A, because of the new yellow colored connector.Kaabli pikkus5 mKaablistandardCat6aPistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Kaabli klassEaSuguMale/MalePistmikukontaktide kateKuldKaabli värvHallSisendi näivtakistus230 ΩMantli materjalMadala suitsu null halogeen (LSZH)AWG-juhtme läbimõõt26/7Sagedus500 MHzÜhendusklemmi kaitseEiSertifikaatIEC 60332-1, IEC 61034Kasutamistemperatuur (T-T)-20 - 60 °CVäline läbimõõt5 mmKogus pakendi kohta1
Original part number CS1308-AT-G Product name ATEN KVM 8/1 USB PS/2 OSD 19" Producer Aten Class of product KVM switches Number of PC ports 8 Supported keyboard/mouse/display ports PS/2, PS/2, D-Sub-15USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case Rack 19" Maximal resolution 2048 x 1536 pixels Active port selection keyboard hotkeyspushbuttonthrough OSD Menu Possibility of joining into cascade Yes Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computerseasy firmware upgrade Standard accessory clip handleAC adaptercommunication cable Width 440 mm Height 44 mm Depth 160 mm Net weight 1.89 kg Additional information 2k/XP/Vista Win, Linux, Mac, Sun compatibleCascade connection o 8 switches allows on control over 64 computersTwo logging levels. Separate profiles of users and administratorHot plugable - pluging in and out devices without switching off
Original part number DN-81201 Product name DIGITUS Professional mini GBIC (SFP) Module, 10Gbps, 10,0km Producer DIGITUS Class of product Media converter Network protocol and connector type 1 10 GigabitEthernet SFP+ Network protocol and connector type 2 SFP GBIC slot Wiring type fibre-optic Net weight 4 g Additional information Mini GBIC SFP (Small Form Factor Pluggable) moduleHigh quality and excellent reliability10 Gbps Maximum Data RateCompliant to IEEE802.3ae 10 Gigabit StandardClass 1 laser product compliant with EN 60825-1Easy plug-and-play installationMSA (Multi Source Agreement) compliantHot pluggableConnector: 1x LC DuplexWavelength: 1310nmTransmission Power: Minimum -8 dBm, Maximum -0,5 dBmSensitivity Receiving Power: Minimum -12.5 dBmFor a distance of up to 10,0kmSafe fast-locking mechanism
TRENDnet’s professional punch down tool, TC-PDT with 110 and Krone blades, inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and Krone. The punch down tool offers reliable, easy-to-use operation at an affordable price.Comfortable shape, easy to handleInterchangeable and reversible bladesSafe storage for spare bladeTwist and Lock style holder provides fast, easy blade changes and prevents blade pullout1-year limited warranty
