Perfect Managed Switches with Advanced L2/L4 Switching and Security PLANET GS-4210-24T4S and GS-4210-24T4SR are the ideal Gigabit Switches which provide cost-effective advantage to local area networks and are widely accepted in the SMB office network. They offer intelligent L2/L4 data packet switching and management functions, friendly web user interface and stable operation. Besides the popular IPv6/IPv4 management and abundant L2/L4 switching functions, the GS-4210-24T4S and GS-4210-24T4SR come with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T4S and GS-4210-24T4SR are equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 4 additional 100/1000BASE-X SFP interfaces with built-in AC or AC+DC redundant power system. They offer a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-24T4S(R) supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-24T4S(R) supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Redundant AC/DC Power Supply to Ensure Continuous Operation The GS-4210-24T4SR is particularly equipped with one 100~240V AC power supply unit and one 36~72V DC power supply unit to provide an enhanced reliable and scalable redundant power supply, the continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 36~72V DC power supply, the GS-4210-24T4SR is able to act as a telecom-level device that can be located in the electronic room. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24T4S and GS-4210-24T4SR help the SMBs to step in the IPv6 era with the lowest investment as their network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-24T4S and GS-4210-24T4SR can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24T4S and GS-4210-24T4SR allow the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-24T4S and GS-4210-24T4SR are loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. They guarantee the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-24T4S and GS-4210-24T4SR offer comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. They can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Their protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Friendly and Secure Management For efficient management, the GS-4210-24T4S and GS-4210-24T4SR are equipped with web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T4S and GS-4210-24T4SR offer an easy-to-use, platform-independent management and configuration facility. For text-based management, the switches can be accessed via Telnet and the console port. By supporting the standard SNMP, the switches can be managed via any standard management software Moreover, the GS-4210-24T4S and GS-4210-24T4SR offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The GS-4210-24T4S and GS-4210-24T4SR provide 4 extra Gigabit SFP interfaces supporting 100BASE-FX/1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T4S and GS-4210-24T4SR successfully reduce substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T4S and GS-4210-24T4SR are able to operate stably and quietly in any environment without affecting their performance. Department/Edge Security and QoS Switch The GS-4210-24T4S and GS-4210-24T4SR connect up to 24 high-speed workstations in the Ethernet environment, in which their four SFP mini-GBIC interfaces provide an uplink to a department backbone. Moreover, the Switches provide 56Gbps switch fabric and high bandwidth for backbone connection. The GS-4210-24T4S and GS-4210-24T4SR improve the network efficiency and safeguard the network clients with their powerful features: IPv6/IPv4 management Layer 2 to Layer 4 security QoS 802.1x port-based and MAC-based network access authentication security Multicast IGMP snooping The advanced functionality of the GS-4210-24T4S and GS-4210-24T4SR eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-24T4S and GS-4210-24T4SR one of the best and most cost-effective switch solutions for SMBs. High-performance Backbone/Server Farm Switch Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 56Gbps non-blocking switch fabric, the GS-4210-24T4S and GS-4210-24T4SR can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The GS-4210-24T4S and GS-4210-24T4SR can offer the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules with the two SFP ports. FTTX/MAN Application The GS-4210-24T4S and GS-4210-24T4SR apply the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMP v3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With two dual-speed SFP slots built in, the deployment distance of the GS-4210-24T4S and GS-4210-24T4SR can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the GS-4210-24T4S and GS-4210-24T4SR can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. Physical Port 24-Port 10/100/1000BASE-T Gigabit RJ45 copper 4 100/1000BASE-X mini-GBIC/SFP slots RJ45 console interface for switch basic management and setup Reset button for system factory default Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
Environmentally Hardened Design PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-5225-8P2T2S, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-5225-8P2T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2T2S can be placed in almost any difficult environment. The IGS-5225-8P2T2S also allows either DIN rail or wall mounting for efficient use of cabinet space. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-8P2T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-5225-8P2T2S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-5225-8P2T2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-5225-8P2T2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-8P2T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-8P2T2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-5225-8P2T2S supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T2S port shows link down, link up or power failure. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-8P2T2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-8P2T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-8P2T2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-8P2T2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-8P2T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-8P2T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P2T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-8P2T2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P2T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P2T2S makes the installation of IP cameras or wireless AP easier and more efficient.
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
See Delocki adapter võimaldab teil ühendada tavalised kõrvaklapid, millel on kaks 3,5 mm stereopesa meesliitmikku, millel on standardne 3-pin viikude määramine, oma nutitelefoni või tahvelarvuti, millel on 3,5 mm 4-pin stereopesa emasport. Lihtsalt ühendage oma peakomplekti pistikupesa adapteri värvikooditud emasportidega. Spetsifikatsioon - Liitmik: 1 x stereopesa 3,5 mm 4-pin isasliitmik > 2 x stereopesa 3,5 mm 3-pin emasliitmik - Stereopesa emas: roosa: mikrofon / roheline: heli - Pinnide määramine 4-pin stereopesa isane OMTP-standardiga (ülemine > varrukas) Vasakpoolne heli - Parempoolne heli - AUX - GND - Värv: must - Kaabli pikkus: ca 10 cm (koos pistikutega) Süsteeminõuded - Vaba 4-pini stereopesa Pakendi sisu - Adapter
Seda Delocki audio stereopesa kaablit saab ühendada oma MP3-mängija, mobiiltelefoni, tahvelarvuti, sülearvuti jne. vaba stereopesa pesaga, et saada kaks stereopesa pesaga liidest. Nii saavad kaks inimest hõlpsasti kuulata muusikat vms, läbi kõrvaklappide. Spetsifikatsioon - Ühendus: 1 x 3,5 mm 3-pin audio stereopesa isane > 2 x 3,5 mm 3-pin stereopesa emane - Kaabli pikkus: ca 25 cm (koos pistikutega) - Värv: must Süsteeminõuded - Vaba 3,5 mm stereopesa Pakendi sisu - Kaabel
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 3 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
The ultra-small USB adapter comes with Bluetooh 5.0 technology which allows fast pairing and stable and energy-saving connectivity. Turn non-Bluetooth PCs or laptops into Bluetooth-capable devices; making it possible to connect with Bluetooth headphones, speakers, keyboards, mice, etc. You can use the USB-C and USB-A port as you like and thanks to the mini size the BT0054 by LogiLink is also easily portable and perfect for on the go.
This ergonomical designed soft mouse pad by Delock acts due to its wrist rest relieving when working with a mouse. With its smooth filling the ball of the hand lays comfortable on the mouse pad. Specification • Flexible soft mouse pad • Wrist rest • Rubberized bottom • Dimensions (LxWxH): ca. 245 x 206 x 20 mm • Weight: ca. 108 g • Colour: grey Package content • Mouse pad
See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. 4PACK
Seda Delocki SFP+ moodulit saab kasutada vaba SFP+ pesaga 10 gigabitise kommutaatori laiendamiseks RJ45-liidesega. Spetsifikatsioon - Ühendused: 1 x SFP+ isane > 1 x RJ45 pesa - Andmeedastuskiirus: Gigabit Ethernet kuni 1 Gbps NBASE-T (eelnõu) kuni 2,5 Gbit/s ja 5 Gbit/s. 10 Gigabit Ethernet kuni 10 Gbit/s - Töötemperatuur: 0 °C ~ 65 °C Süsteeminõuded - Vaba SFP+ pordiga seade Pakendi sisu - SFP+ moodul
Seda Delocki USB 2.0 ja RS-232 kaablit saab kasutada CISCO ruuterite, kommutaatorite, pääsupunktide ja muude ühilduvate seadmete konsooli juhtimiseks arvuti või sülearvuti kaudu. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A isane 1 x jada RS-232 RJ45 pesa - Kiibistik: FTDI FT232RL - Ühildub USB 3.0, USB 2.0 ja USB 1.1 täiskiirusega 12 Mbit/s. - Andmeedastuskiirus kuni 230,4 Kbit/s - Kaabli pikkus koos pistikutega: ca. 1,8 m - Sobib erinevate CISCO seadmetega Süsteeminõuded - Linuxi tuum 2.6 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 2.0 ja 1 x jadaadapter - Draiveri CD - Kasutusjuhend
Seda Delocki USB 2.0 kaablit saab ühendada aktiivsesse USB-porti ja see võimaldab 5 m pikkust pikendust. 5 m pikkuste lisakaablite ühendamisega saate USB-porti pikendada kuni 25 m kaugusele. Spetsifikatsioon Pistikud: 1 x USB 2.0 Type-A isane > 1 x USB 2.0 Type-A emane Kiibistik: FE 1.1 Ühendamiseks aktiivse USB-pordi külge Kaabli mõõtmed: Kaabli mõõtmed: 28 AWG andmeliin 22 AWG toiteliin Pikendus kuni 5 x 5 m kaablitele Ühendused: kullatud Võimsus: kuni max. 500 mA Kaabli pikkus: ca 5 m Süsteeminõuded Linuxi tuum 3.2 või uuem Mac OS 10.9 või uuem Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba aktiivne USB A-tüüpi port Pakendi sisu USB 2.0 pikenduskaabel 5 m
See Delocki kaabel võimaldab ühendada DisplayPort-monitori USB-C™-i või Thunderbolt™ 3-pordiga arvuti või sülearvutiga, nagu MacBook või Chromebook. Liides peab toetama DisplayPorti alternatiivrežiimi. Spetsifikatsioon • Ühendused: 1 x USB Type-C™ isane > 1 x DisplayPort 20 kontaktiga isane • Kiibistik: küpress • DisplayPort 1.2 spetsifikatsioon • Signaali suund: USB Type-C™ sisend > DisplayPort väljund • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Heli- ja videosignaalide edastamine • Toetab 3D-kuvasid • Toetab HDCP 1.4 • USB siini toitega • Plug & Play • Ühendused: kullatud • Värvus: must • Pikkus ilma pistikuteta: ca. 3 m
• 24 Gigabit PoE+ ports and 4 Gigabit SFP ports • Total PoE power budget: 390W, up to 30W per port • IEEE 802.3af/at PoE compliant to simplify deployment and installation • Supports working temperature -10℃~50℃ • 6KV surge protection, 6KV contact / 8KV air ESD protection
Simplify your technology transition with Intel Ethernet X710-T2L and X710-T4L network adapters. Auto-negotiation of port speeds provides maximum flexibility in dual- and quad-port 10GBASE-T configurations. These low-power power supplies also support Energy Efficient Ethernet technology to effectively reduce power consumption during periods of low data activity. The X710-T2L and X710-T4L are part of the Intel Ethernet 700 series, the foundation of server connectivity; enabling broad interoperability, critical performance optimizations and increased flexibility for network solutions across communications, cloud and enterprise IT. Interoperability across multiple speeds and media types ensures broad compatibility supported by extensive testing and validation. Intelligent offload optimization and accelerators to unlock network performance on Intel Xeon-based servers. Agility kernel drivers and Data Plane Development Kit (DPDK) for scalable packet processing. The Intel Ethernet 700 Series delivers network performance across a wide range of network port speeds with intelligent offload, advanced packet processing, and high-quality open source drivers.
