NETGEAR M4350 Series M4350-24F4X - Switch - L3 - managed - 24 x 1/2.5 Gigabit SFP + 4 x C 10 G-Bit SFP+ - Luftstrom von vorne nach hinten - an Rack montierbar - für NETGEAR AGM731F; ProSafe AGM731F, AGM732F
Der verbaute Realtek® Chipsatz RTL8125B bietet hervorragende Leistung und sorgt für schnellen Datendurchsatz. Zudem wird durch die ST-7266 der Hauptprozessor weiter entlastet, sodass der Netzwerktransfer nicht mehr so stark den Hauptprozessor beansprucht, was oft beim Einsatz von normalen Netzwerkkarten in einem Serverumfeld der Fall ist. Der Anschluss erfolgt durch einen RJ45-Port mit einer Geschwindigkeit von bis zu 2,5G.
Fast 10 Gb/s data transfer in local networks The Extralink CAT6A U/UTP installation cable is a professional network cable designed for building structured internal LAN networks. The product supports a frequency band of up to 500 MHz, which enables stable operation of telecommunication systems requiring rapid information transfer. Its special construction eliminates the need for additional shielding, making it easier to lay the cable in cable trays. Key advantages Stable data transmission thanks to a frequency band of up to 500 MHz. Full bandwidth and lower signal attenuation thanks to conductors made of pure copper. Reduced internal interference thanks to a plastic pair separator. Powering network devices using PoE, PoE+ and PoE++ technology. Durable PVC outer sheath with a thickness of 0.50 ± 0.05 mm protects the cable from damage. No voltage drops over long distances thanks to the optimal conductor thickness of 24 AWG. Stable signal thanks to pure copper Conductors made entirely of pure copper (cu) guarantee minimal signal attenuation and excellent transmission parameters. The 24 AWG conductors maintain full data structure integrity לאורך the entire installation run. The use of solid metal instead of cheap CCA composite substitutes eliminates the risk of wire breakage and determines the long service life of the entire infrastructure. Power and data in one cable The solid copper construction supports advanced PoE, PoE+ and PoE++ power standards. This solution delivers electrical power directly to end devices such as IP cameras or access points, without running separate power cables. This reduces the number of cables needed, simplifies the network structure and noticeably lowers the overall investment costs. Lightning-fast transfer of large files The cable offers full support for data transmission at speeds of up to 10 Gb/s in the 10 Gigabit Ethernet standard. Such high bandwidth shortens the time needed to transfer large databases and ensures smooth ultra-high-definition video streaming. The infrastructure remains fully stable even when handling multiple demanding processes simultaneously in server rooms. Safe indoor installation The twisted-pair computer cable forms a durable base for structured networks in offices, commercial premises and detached houses. The product is ideal for professional CCTV installations, where it is responsible for continuous video transfer. The outer sheath protects the cable when pulling it through conduits and walls. Protection against interference and crosstalk The four pairs of twisted conductors are separated by a special plastic cross separator, which physically isolates the individual bundles from one another. This solution prevents crosstalk and eliminates electromagnetic distortion inside the cable. An additional high-density HDPE sheath guarantees excellent dielectric insulation and increases mechanical strength.
Stable 10 Gb/s data transfer without electromagnetic interference The installation F/FTP category Cat. 6a network cable eliminates the problem of slow transfer and interruptions in data transmission in local LAN networks. The shielded construction blocks external electromagnetic interference, guaranteeing a clean signal in offices and server rooms. The product supports a frequency band of up to 500 MHz, which sets it apart from standard solutions and ensures stability for demanding network applications. Key advantages Bandwidth up to 10 Gb/s – guarantees lightning-fast transfer of large files and smooth operation of systems. Double F/FTP shielding – completely cuts off external interference and eliminates crosstalk between pairs. 24 AWG pure copper conductors – ensure minimal signal attenuation and years of cable life. Full compatibility with PoE, PoE+ and PoE++ – enables simultaneous powering of devices and data transmission over a single cable. 0.50 mm thick PE polyethylene jacket – protects the internal structure from mechanical damage. HDPE insulation – protects the copper conductors and guarantees appropriate dielectric parameters. Maximum performance thanks to conductive copper conductors The cable uses thick conductors with a diameter of 24 AWG made entirely of pure copper. The use of cheap CCA composite substitutes eliminates voltage drops and reduces cable heating under load. Pure copper maintains full signal integrity along the entire cable run, protecting the infrastructure from failures and costly downtime. Powering network devices through a single cable The pure copper construction offers full compatibility with PoE, PoE+ and PoE++ power standards. This solution delivers power directly to CCTV surveillance cameras, Wi-Fi access points or VoIP phones without the need for separate power lines. Using Extralink twisted pair cable reduces the cost of additional cabling and greatly simplifies equipment installation in hard-to-reach places. Lightning-fast data transmission in business networks The cable easily supports transmission speeds of 10 Gb/s, meeting the strict requirements of modern corporate networks. The bandwidth of the 10 Gigabit Ethernet standard shortens database copying times, eliminates delays during video conferences and enables smooth high-definition video streaming. It is the optimal choice for building a network backbone that will cope with growing internet traffic. Safe structured installation indoors The twisted-pair computer cable was designed for safe installation inside residential, office and commercial buildings. The outer jacket protects the installation when pulling it through cable trays and conduits. The product makes it easier to create stable subscriber points and reliable connections between rack cabinets, guaranteeing the aesthetics and durability of the entire network installation. Advanced protection against internal interference The construction is based on 4 optimally twisted pairs, each with individual foil shielding. This solution completely blocks crosstalk between adjacent conductors inside the cable. An additional layer of HDPE insulation with increased density provides mechanical protection and maintains the constant geometry of the pairs, which translates into stable transmission parameters for many years.
Fast 10 Gb/s data transfer in professional local networks The Extralink Category 7 network cable supports data transmission at speeds of up to 10 Gb/s, eliminating delays when transferring large files. The design operates in a frequency band of up to 600 MHz, ensuring stable performance for demanding corporate systems. This installation cable shortens packet transfer times in LAN network structures, standing out for its full resistance to transmission overloads. Key advantages Bandwidth up to 10 Gb/s – guarantees lightning-fast data transfer and smooth video streaming without buffering. S/FTP shielding – eliminates electromagnetic interference and crosstalk, protecting the integrity of the network signal. 24 AWG pure copper conductors – ensure minimal signal attenuation and many years of infrastructure service life. Support for PoE, PoE+ and PoE++ – enables simultaneous power delivery and data transmission over a single cable. High-density HDPE insulation – protects the internal conductors from mechanical damage. PVC outer sheath – protects the cable structure and makes it easier to route in installation trunking. Protection against interference thanks to S/FTP shielding The use of advanced S/FTP shielding completely eliminates internal crosstalk and external electromagnetic interference. Each of the 4 twisted wire pairs has its own aluminium foil shield, while the whole is protected by an additional braided reinforcing mesh. This construction protects the signal from distortion, which directly translates into error-free network operation in environments with a high density of electronics. Maximum signal stability with pure copper The design is based on conductors made entirely of pure copper, which eliminates signal losses over long distances. The 24 AWG conductors maintain full bandwidth without showing the susceptibility to breakage often found in cheap CCA composite substitutes. Choosing this material increases current conduction efficiency and guarantees stable transmission parameters for years of use. Powering end devices with PoE standards Copper conductors with an optimal cross-section easily support PoE, PoE+ and PoE++ power standards. This solution delivers power and data directly to CCTV surveillance cameras, Wi-Fi access points or VoIP phones via a single line. The cable reduces investment costs by eliminating the need to lay additional power cables to each device. Practical use in internal installations The computer twisted pair cable provides a stable foundation for structured networks inside offices, detached houses and commercial premises. The product is suitable for professional CCTV systems where simultaneous, smooth transmission of high-resolution images and camera power supply is required. Its versatile installation properties make it easy to route cables inside walls and floors. Mechanical durability of the multi-layer PVC sheath The outer PVC sheath with a thickness of 0.50 mm protects the internal cable structure from abrasion and pressure during pulling through conduit. Beneath the outer layer is advanced HDPE dielectric insulation with increased density, which rigidly maintains the position of the conductors. This multi-layer construction protects the mechanical and electrical integrity of the cable, guaranteeing resistance to installation damage.
Fast 10 Gb/s data transfer in local networks The Extralink CAT6A U/UTP installation cable is a professional network cable designed for building structured internal LAN networks. The product supports a frequency band up to 500 MHz, which enables stable operation of telecommunication systems requiring rapid information transfer. Its special construction eliminates the need for additional shielding, making it easier to lay the cable in cable trays. Key benefits Stable data transmission thanks to a frequency band up to 500 MHz. Full bandwidth and lower signal attenuation thanks to pure copper conductors. Reduced internal interference thanks to a plastic pair separator. Powering network devices using PoE, PoE+ and PoE++ technology. Durable PVC outer sheath with a thickness of 0.50 ± 0.05 mm protects the cable from damage. No voltage drops over long distances thanks to the optimal conductor thickness of 24 AWG. Stable signal thanks to pure copper Conductors made entirely of pure copper (cu) guarantee minimal signal attenuation and excellent transmission parameters. The 24 AWG conductors maintain full data structure integrity throughout the entire installation run. Using solid metal instead of cheap CCA composite substitutes eliminates the risk of wire breakage and ensures the long service life of the entire infrastructure. Power and data in one cable The solid copper construction supports advanced PoE, PoE+ and PoE++ power standards. This solution delivers electrical power directly to end devices such as IP cameras or access points, without the need for separate power cables. This reduces the number of cables required, simplifies the network structure and noticeably lowers the overall investment costs. Lightning-fast transfer of large files The cable offers full support for data transmission at speeds of up to 10 Gb/s in the 10 Gigabit Ethernet standard. Such high bandwidth shortens the time needed to transfer large databases and ensures smooth ultra-high-definition video streaming. The infrastructure remains fully stable even when handling multiple demanding processes simultaneously in server rooms. Safe installation indoors The twisted-pair computer cable provides a durable foundation for structured networks in offices, commercial premises and detached houses. The product is ideal for professional CCTV installations, where it is responsible for the continuous transfer of video material. The outer sheath protects the cable when pulling it through conduits and walls. Protection against interference and crosstalk The four pairs of twisted conductors are separated by a special plastic cross separator, which physically isolates the individual bundles from one another. This solution prevents crosstalk and eliminates electromagnetic distortion inside the cable. The additional high-density HDPE sheath guarantees excellent dielectric insulation and increases mechanical strength.
2-pordine kompaktne DVI USB KVM switch (audio ja mikrofoniga)Toetab PC, Macintosh G3/G4, iMAC arvuteidVideo resolutsioon kuni 1920 x 12002-aastane garantii
Nagu 522E Seda kasutatakse kõikide lõiketööde tegemiseks kergesti ligipääsetavates kohtades. Massiivne pea võimaldab suurt lõikevõimet ja seda iseloomustab vastupidavus. See on standardne pea kuju.
SpecificationsOutput Voltage 24VOutput Rating 0.5A (12W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
D-Link DES-1016D/E. Switch type: Unmanaged. MAC address table: 8000 entries, Maximum data transfer rate: 0.1 Gbit/s. LED indicators: power. Internal memory: 2 MB. Data transfer rate: 100 Mbit/s, Dimensions (WxDxH): 324 x 231 x ...
Applicable for SOHO solutionsDIGITUS Desktop CAT 6A Patch Panel, shielded, Class EA, 12-port RJ45, 8P8C, LSAThe Desktop Patch Panels from DIGITUS® are the ideal solution for SoHo applications (Smart Office Home Office).The fully shielded RJ45 sockets provide an optimal stability for your cables with best performances.Package Content- Desktop panel- Mounting instruction- Cable tiesPortide hulk12Pistmik(ud)RJ-45Toetatud kaablitüübidCat6aToote värvMustPüstikmontaažJah
