Specifications Output Voltage 54V Output Rating 1.5A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
Xtreme Wireless AC1200 Dual Band USB Adapter Draft 802.11ac support, up to 867 Mbps data rate Backward Compatible with 802.11a/b/g/n, 2.4/5Ghz High speed USB 2.0 interface WEP, WPA, WAP2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily Flash like formfactor Without USB cradle
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT 6, Shielded, FTP-shielded 4 twisted-pair kaabel, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbepunane fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
Wireless Router|Available bandwidth 2533 Mbps|IEEE 802.11a/b/g|IEEE 802.11n|IEEE 802.11ac|USB 2.0|USB 3.0|1 WAN|4x10/100/1000M|Antenna Type Omni-Directional|Wireless Frequency Range 2.4 - 5 GHz|Included Accessories Antenna x 4,AC Power Adapter,RJ-45 LAN Cable,Quick Installation Guide|Dimensions 77 x 280 x 169mm Shipping box quantity 4 Unit Brutto Volume 0,009504 cubm Unit Gross Weight 1,65 kg
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
TRB255TRB255 is an industrial Gateway equipped with a number of Input/Output Serial Ethernet ports and LPWAN modem. With backwards compatibility to EGPRS (2G) network legacy industrial devices can be upgraded for extended use and support of LTE Cat M1 and NB-IoT ensures long lifecycle. Number of all features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial Gateway TRB255 is equipped with LPWAN modem GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features in one package: secure power connector I/O ports serial communication fast and reliable internet connection for industry applications where long lifecycle option is a must. TRB255 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of hardware and software features such as LTE Cat M1 NB-IoT SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises. Without this backward compatibility to EGPRS (2G) networks allows upgrade already working devices and ensures that after 2G network switch off your equipment will be accessible with support of LTE Cat M1 NB-IoT.
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
LT500 4G LTE AC1200 Dual Band WiFi Router LTE speed up to 150 / 50Mbps AC1200 Wi-Fi for smoother operation High-gain antennas for extended range PPTP/L2TP/OpenVPN/WireGuard/IPsec/Zerotier VPN Compatible with over 15 DDNS providers DNS via Cloudflare/NextDNS/Google
Wired security IP camera with up to 2880 × 1620 px resolution and 100°–110° viewing angle, Lens: 2.8 mm, Frame rate 25 FPS, JetSparrow, microSD, H.265, H.264, WDR, Motion detection, Object detection, Smart IR illumination up to 35 m,Visual verification of Ajax alarms, Microphone, Power supply 12V 1A, PoE Standard 802.3at
Original part number NCA-LC5E-001 Product name Gembird RJ45/RJ45 in-line coupler cat.5E Producer Gembird Class of product Network plug | coupler | boots Type of plug, coupler RJ45 (8P8C) Wiring type CAT5E Additional information Cat. 5E LAN coupler, white colorRJ-45F to RJ-45F connectors
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
The Ubiquiti repeater and transceiver module enhances and extends your network's reach. With its Ethernet 1000Base-BiDi connectivity, it provides a reliable, wired connection that supports high-speed data transfer rates of up to 1.25 Gbps. This plug-in module can extend the network coverage up to 3 km, making it suitable for larger spaces needing robust connectivity.Engineered for durability and safety, the module meets IEC/EN 60825-1:2014 Class 1 standards, ensuring it operates safely within a broad temperature range from 0°C to 70°C. Its LC single-mode connectors allow for seamless integration with existing network infrastructure, making it a versatile addition to any setup. Whether you're looking to enhance your network's performance or extend its reach, the Ubiquiti repeater and transceiver module provides a reliable solution.
