NanoStation LocoM5, 5 GHz, 150+ Mbps, range 10+ km, 13 dBi, Pole Mounting kit included, Power method - Passive Power over Ethernet,airMAX,EU (LOCOM5(EU))
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Elame ajal, mil Internetil on meie elus suur roll mängida. Paraku ei ole WiFi signaal alati kõige stabiilsem ning ei pruugi ühtlaselt levida meie kodude või kontorite kõikidesse nurkadesse. Siin tuleb appi Deco M5 mesh ruuteri süsteem, mis võimaldab seadmed paigutada hoone erinevatesse kohtadesse, kuid nautida ühte ja stabiilset WiFi võrku kogu elamis- või äripinnal. Deco M5 ruuterid sobivad hoonesse, mille suurus on kuni 510 ruutmeetrit. Suuremate pindade katmiseks on võimalik juurde soetada rohkem ruutereid ning neid olemasolevatega ühendada. Deco M5 loob kiire ja stabiilse ühenduse kombineeritult kuni 1267 Mbps (400 Mbps 2.4 Ghz + 867 Mbps 5 Ghz) ning töötab enamike modemite ja teenuspakkujatega (ISP). Deco suudab sujuvalt pakkuda ühendust kuni 100 seadmele. Ruuterisüsteemi ühendamine on imelihtne ning Deco enda rakendus aitab Sind igal sammul. Samuti saad Deco M5 juhtida Amazon Alexa abil. Komplektis on 2 ruuterit!
The TFC-110MST Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode ST-Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (ST-Type).ST-type multi-mode fiber port connects over distances of up to 2km (1.2 miles)10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex modeFunctions as a stand alone converter or with the TFC-1600 fiber chassis
802.11n Wireless Access Point with Advanced Features, 802.11b/g/n compatible, up to 300 Mbps, 1 10/100BASE-TX Fast Ethernet ports, 64/128 - bit WEP Encryption, WPA/WPA2-PSK, WPA/WPA2-EAP, TKIP/AES, IEEE 802.1x support, Quality of Service
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,526 kg
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,523 kg
Intelligent 10/100Base-TX to 100Base-FX Single Mode SC Fiber Converter TFC-110S60i (Version A1.1R) SC-type single-mode fiber port connects over distances of up to 60km 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-110S60i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP management and spans distances of up to 60km (37.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards One 10/100Base-TX auto-negotiation RJ-45 port Auto MDIX for 10/100Base-TX port and one 100Mbps fiber port with single-mode SC-type connector Provides Dip switch to set: Fiber (FDX/HDX), Ethernet (Forced/Auto-Negotation), Ethernet Speed (10M/100M), LLR (Enable/Disable), LLCF (Enable/Disable) Half / Full-Duplex mode selector on Fiber port Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, speed, LLCF, LLR, and receive link down information via management module (TFC-1600MM) and chassis (TFC-1600) Status LED indicators for Power, Link/Activity, Full-Duplex, Link Fail, and Speed Wall-Mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber (40 km / 24.85 miles) TFC-1000S40D3 (Version C1.1R) Must use with TFC-1000S40D5 SC-type dual-wavelength single-mode fiber port connects over distances of up to 40 km (24.85 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S40D3 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 40 km (24.85 miles). This module must be used with the TFC-1000S40D5 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (Link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link / Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Peab kasutama koos TFC-1000S40D3-ga. SC-tüüpi kahe lainepikkusega ühemoodiline kiudoptiline port ühendab kuni 40 km (24,85 miili) kaugusele. 1000Base-T Gigabit vaskport toetab täisdupleksrežiimi Toetab pordi tasandi SNMP-haldust Toimib iseseisva muundurina või koos TFC-1600 kiudoptilise šassiiga TFC-1000S40D5 kahesuunaline intelligentne kiudkonverter töötab koos TFC-1600 šassiisüsteemiga või iseseisva seadmena. See muundur on kahe lainepikkuse ühe režiimiga SC-tüüpi kiudkonverter, mis toetab pordipõhist SNMP-aruandlust ja ulatub kuni 40 km (24,85 miili) kaugusele. Seda moodulit tuleb kasutada koos mooduliga TFC-1000S40D3. Pordid on 1 x 1000Base-T (RJ-45) port ja 1 x 1000Base-LX (SC Simplex-tüüpi) port. Vastab standarditele IEEE 802.3ab 1000Base-T ja IEEE 802.3z 1000Base-LX. 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX ühemoodiline kahesuunaline simplex-SC-tüüpi kiudoptiline port Pakub Dip lüliti seadistamiseks: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable). Toetab LLCF (Link Loss Carry Forward, Link Pass Through). Toetab LLR (link Loss Return) FX-porti jaoks. Jälgib ja konfigureerib Ethernet või Fiber'i dupleksrežiimi, LLR, port on / off ja saab link down teavet juhtimismooduli TFC-1600MM ja šassii TFC-1600 kaudu. Toite ja ühenduse / aktiivsuse oleku LED-indikaatorid Seinale paigaldatav Valikuline 19-tolline süsteemikere koos üleliigse toiteallikaga (TFC-1600), mahutab kuni 16 TFC-seeria meediamuundurit.
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (50km/31miles) TFC-1000S50 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 50km (31 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S50 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 50km (31miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
The TFC-1000S70 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 70km (43.5 miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.Andmeedastuskiirus (maksimaalne)1000 Mbit/sKaabeldustehnoloogia1000Base-T, 1000Base-LXLainepikkus1300 nmLED-indikaatoridVõimsusVõimsustarve (tüüpiline)7,2 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)10 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 90 protsentiAndmelüli protokollidCSMA/CDPistmik(ud)SC
D-SUB kestad on loodud D-SUB pistikute kaitseks ja pingevähenduseks. Neil on 9-positsiooniline disain, plastkorpus metallkattega vastupidavuse tagamiseks ning sirge kaabli sisseviik lihtsaks kaabli sisestamiseks. Kruvi võimaldab turvalist ja reguleeritavat kaabli kinnitust.Põhikirjeldus:Tüüp: D-SUB katePositsioonid: 9Materjal: Plastik, metallkattegaKaabli sisseviik: SirgeKinnituse mehhanism: KruviKeerme tüüp: UNC 4-40Need D-SUB korgid sobivad ideaalselt rakendustele, mis vajavad kaitset ja pingevähendust D-SUB pistikute jaoks erinevates elektroonilistes ja tööstuslikes keskkondades.
Versatile socket operation modes, including TCP Server, TCP Client, UDP Patented ADDC® (automatic data direction control) for 2-wire and 4-wire RS-485 Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors) Redundant DC power inputs Warning by relay output and e-mail 10/100BaseTX (RJ45) or 100BaseFX (single mode or multimode with SC connector) IP30-rated housing OverviewNPort® IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPort® IA device servers makes them an ideal choice for establishing network access to RS-232/422/485 serial devices such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. All models are housed in a compact, rugged housing that is DIN-rail mountable.
