Tootja: Lanberg Tootegrupp: Complete outlet Type of ühenduspesa: 1 x RJ45 ports: 1 Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs, CAT5E Category: 5e kasutusvaldkond: on wall/surface mounted Lisaandmed: Allows connection of conductors 26-22 AWG, universaalne IDC/LSA Ühendusi in accordance koos T568A/B laius: 0 mm kõrgus: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: valge
In-Wall 802.11ac Wave 2 Wi-Fi Access PointThe sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology. For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi IW HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi IW HD AP can support more than triple the number of users than a typical Wave 1 AP.Superior Processing PowerThe UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE) StandardThe UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch.Quick and Simple InstallationThe UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware.
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm.GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred. The GPEN family of products includes switches with outdoor enclosures, which support powering from PoE sources, such as the GPEN11 injector. A basic setup inside customer premisis to provide the Internet connection. Power adapter is not included in the package.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Lihtne Cloud P2P QR-koodi paigaldamine5MP HD video (2592 x 1920) 20 fps juuresÖönägemine IR LED-id öövaatluseks kuni 30 m (98 ft.) ulatusesSisseehitatud mikrofon ühesuunalise heli jaoksVälitingimustes kasutatav IP66 ilmastikukindlusLai dünaamilise ulatuse pildi tasakaalustamineSäästab paigalduskulusid Power over Ethernet (PoE) abilProgrammeeritav liikumistuvastuse salvestamine ja e-posti hoiatusedMicro SD-kaardi pesa (kuni 256 GB)Tasuta Sentinel iOS® ja Android™ mobiilirakendusedTasuta View Manager PC-tarkvaraValmistatud TaiwanisNDAA / TAA nõuetele vastavTRENDneti 5MP H.265 PoE IR Bullet Network Camera, mudel TV-IP1514PI, pakub päevase ja öise jälgimise võimalust kuni 30 meetri (98 jalga) öövaatluskaugusega. See kuulivõrgukaamera pakub aastaringset jälgimist, kuna selle IP66 ilmastikukindla korpusega kaamera peab vastu välitingimustes. Salvestab kuni 5MP HD-videot 20 kaadrit sekundis ruumisäästlikus H.265 pakkimisformaadis. Vaadake 5MP PoE-kaamera live-videot hõlpsasti oma mobiilseadmes, kasutades meie tasuta Sentinel mobiilirakendust, või arvutis meie tasuta View Manager lauaarvutikaamera videohaldustarkvara abil.
The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Material SECCDimension (W x H x D) 130.4mm x 170mm x 45mmOperating Temperature -40ºC ~60ºCHumidity 0~90% RHLoad Bearing 10.0KgWeight 1KgApplicable Model PFB300S, PFB300W, PFB301W, PFA120, PFA130, PFA131, PFA140, PFB300C, HDC-HFW3200C, IPC-HFW(C)
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL9004.
Original part number PP6U-5M/Y Product name Gembird UTP Cat6 Patch cord, 5 m, yellow Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Yellow
Fully Integrated RadioLaunched in 2008, the Bullet™ design helped transform the WISP industry. Its unique design upgrades link performance and reduces deployment complexity.Carrier-Class ThroughputThe Bullet™AC delivers up to 300+ Mbps real TCP/IP throughput.
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series, DISC 5
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
AirMax Omni is a Carrier Class omnidirectional antenna that was designed to seamlessly integrate with Rocket M radios (sold separately).Rocket M combines the “brains” in one robust unit, pair Rocket M with AirMax Omni to create powerful 360 omnidirectional coverage. This seamless integration gives network architects unparalleled flexibility and convenience.Rocket Mount Included. AirMax Omni antennas all come with a universal Rocket M mount for easy installation.RF Cables Included. Rugged, weatherproof RF cables are included with AirMax Omni antennas.
A super low loss RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
