This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
Specifications Output Voltage 24 V Output Rating 1A (24W) Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
The media converter from DIGITUS is the ideal solution for the migration of copper and fiber network signals. From now on, you are able to access the Fiber technology and transfer network signals over several kilometers without renewing your whole network infrastructure.
Deco M5 uses the latest technology to create a wireless mesh to paint your home in Wi-Fi. Mesh technology relies on several units working together to replace your router and create seamless Wi-Fi in every room. Each Deco mesh router can work independently, with in the network, to cover up to 4,500 sq. ft. of fast Wi-Fi. For even more coverage, you can use up to 9 Deco M5 units on a single network.
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
This M.2 docking station by Delock enables the installation of an M.2 PCIe NVMe SSD and it can be connected via USB to the PC or laptop. The included USB cables allow the connection to a free USB Type-A or USB-C™ port. Ideal test equipment The memory is simply plugged into the robust metal housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly. Specification • Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female 1 x 67 pin M.2 key M slot • Chipset: Asmedia ASM2362 • Supports M.2 modules with key M or key B+M based on PCIe (NVMe) • Supports NVM Express (NVMe) • Bootable • Data transfer rate up to 10 Gbps • LED indicator for power and access • 1 x On / Off switch • Metal housing • Dimensions (LxWxH): ca. 49 x 49 x 12 mm • Hot Plug, Plug & Play System requirements • Chrome OS 78.0 or above • Linux Kernel 4.3 or above • Mac OS 10.15.2 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port or • PC or laptop with a free USB Type-A port Package content • M.2 docking station • Cable USB-C™ male to USB-C™ male, length ca. 30 cm • Cable USB-C™ male to USB Type-A male, length ca. 30 cm • User manual
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
"Cisco Catalyst 1300-16XTS kommutaator on osa Cisco Catalyst 1300-16XTS täielikult hallatavate kommutaatorite tootesarjast, mis pakub usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudele. Need kommutaatorid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebipõhise armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
"Cisco Catalyst 1300-24XS kommutaator on osa Cisco Catalyst 1300-24XS täielikult hallatavate kommutaatorite tootesarjast, mis pakub usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudele. Need lülitid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebipõhise armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
Deko XE75 Pro AXE5400 tri-band 6E mesh Wi-Fi system Wi-Fi 6E for the whole house - cover an area of up to 2,900 meters with seamless next-generation Wi-Fi and make dead zones and buffering a thing of the past All-new 6 GHz band - Experience the latest Wi-Fi frequency, eliminating interference from all older devices. The 6 GHz band also provides powerful dedicated backhaul that further improves the Wi-Fi performance of non-6E devices True tri-band speed - all three Wi-Fi bands work together to unleash a total network speed of up to 5,400 Mbps for 200 devices Artificial intelligence-driven mesh - connects your home under a single name and password, while ensuring the best connections as you move from room to room TP-Link HomeShield - keeps your home network secure with state-of-the-art network and IoT protection features Easier than ever to set up - the Deco app guides you through setup step-by-step Universal compatibility - backwards compatible with all generations of Wi-Fi and works with any Internet Service Provider (ISP) and modem
Der DMG-36 ist ein 2in1 WLAN- & Bluetooth 5.2-Adapter. Er ermöglicht es, den PC mit dem WLAN-Netzwerk zu Hause oder im Büro zu verbinden. Der WLAN (802.11 a/b/g/n/ac/ax (Wi-Fi 6)) PCIe-Adapter ist mit einem modernen MediaTek MT7291 Chipsatz und zwei 6dBi starken Antennen ausgestattet und bietet mit Geschwindigkeiten von bis zu 5400 Mbit/s im 2,4GHz oder 5GHz Netz die ideale Basis für ein High-Speed Datentransfer. Neben der WLAN-Funktion bietet der DMG-36 auch eine Bluetooth 5.2- Schnittstelle und ermöglicht Ihnen so Ihren Computer mit einem Smartphone, Tablet oder einem anderen Bluetooth Gerät zu verbinden.
Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club! There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. Obviously, there is an Ethernet port for management purposes as well. We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network. With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.
Patchcord cat.6 FTP 1M 10-pack fluke passed grey Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors-copper, CCA; sheath-PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
Patchcord cat.6 FTP 0.25M 10-pack fluke passed blue Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors-copper, CCA; sheath-PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Charge smartphones and tablets directly from the wall socket! With the DIGITUS USB charging box you can even charge 3 smartphones or tablets at the same time. Charge one USB-C device with up to 14 W (5 V / 2.8 A) and two USB A devices with up to 14 W (5 V / 2.8 A). For example, you can charge your smartphone and your tablet simultaneously with a total available charging capacity of 15.5 W. Protect yourself and your family with the integrated electronic short circuit and overload protection in the USB ports. Upgrade your existing electrical installations and enjoy being able to charge your USB devices at any time, directly from the wall socket.
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Specification: ICT category: 6 Shield type: F/UTP (Foil shield) Length: 0.5m Cable execution: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: Cores: Copper plated, CCA; Coating: PVC Colour: black RAL9004 Frequency: up to 250MHz Bandwidth: up to 10Gbps Core layout in accordance with ANSI/TIA/EIA-568-B standards They meet the requirements of IS0/IEC 11801 class E
Desktop switch, 16 gigabit ports, including 16 PoE+ ports 16 Gigabit RJ45 ports 16 PoE+ ports, power and data transfer via one cable Compatibility with PoE-powered devices operating in IEEE 802.3af/at standards. Up to 30 W of PoE power on each PoE port PoE power supply support up to 120W for all PoE ports Up to 250m of data and power transmission in Extend mode Priority mode provides high priority for ports 1-4 Isolation Mode enables one-click separation of client traffic for improved security and performance. Automatic restart of PoE-powered devices that are dead or unresponsive thanks to the PoE Auto Recovery function. Plug and play connection, no configuration or complicated installation required. Dedicated 16 PoE+ ports (120 W budget) for many applications Compatibility with the 802.3af/at PoE+ standard provides up to 30 W of power on each PoE port. A total PoE power budget of 120W* for 16 PoE+ ports opens up a wide range of applications such as surveillance in offices, dorms and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers and more Perfect for monitoring - Up to 250 m of transmission Thanks to the Extend mode, the transmission distance can reach up to 250m, perfect for installing IP cameras in large areas. Auto lifting system with PoE Auto Recovery The switch automatically detects and restarts PoE-powered devices such as cameras and access points when they stop working or become unresponsive, ensuring stable device operation without the need for manual monitoring and restarting. Intelligent power management When total power consumption exceeds 120W, Intelligent Power Management turns off power to the lowest priority port to provide power to higher priority ports and thus protect the device from overload. It also enables automatic detection of the PoE power required by a given device and protects non-PoE devices from damage. Durable metal housing The internal components of the TL-SG116P switch are protected by a high-quality metal housing ensuring a long product life. After passing a series of rigorous reliability tests, the TL-SG116P delivers switching performance you can rely on.