The KMU2P converter emulates the presence of a keyboard and mouse (via the PS/2 connectors) to the device at all times. This means that when used with a KVM switch, there will be no delay in response when switching to this channel.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
ADDER® rackmount komplekt RMK15-SHRackmount komplekt ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjateleADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK15 on rackmount komplekt, mis on loodud kasutamiseks ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjatega. RMK15-SH mahutab kuni kaks seadet. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.
See Delocki mikrofon sobib mobiilseks kasutamiseks nutitelefonis või tahvelarvutis ning seda saab kasutada kõne- ja häälte edastamiseks. Kummeeritud alus tagab libisemiskindla aluse ja mikrofoni saab liblikkaela abil keerata ideaalsesse suunda. Lisaks on mikrofonil 3,5 mm stereopesa emasport ja seega saab samal ajal kasutada kõrvaklappe. Spetsifikatsioon - Ühendused: 1 x 3,5 mm 4-poldiline audio stereopesa isaspea 1 x 3,5 mm 3-poldiline stereopesa (emane) - Suunatavus: kõikehõlmav - Impedants: 2,2 kOhm - Tundlikkus: -32 dB +/- 3 dB - Sagedusvahemik: 100 Hz - 13 kHz - Mõõtmed (LxSxK): ca. 55 x 64 x 143 mm - Kaal: ca. 88 g - Kaabli pikkus: ca 1,7 m Süsteeminõuded - Vaba stereopesa, mis vastab CTIA-standardile Pakendi sisu - Mikrofon
ADDER® SFP-SM-LC-10GÜhekiuline 10 Gbps SFP+ LC-pistikuga.Ühekiuline 10 Gbps SFP+ LC-pistikuga, vastab standardile IEEE 802.3ae. See transiiver kasutab 1310 nm DFB-laserit ja on mõeldud optiliste andmete edastamiseks ja vastuvõtmiseks ühekiulise optilise kiu kaudu ühenduse pikkusega 10 km.
Seda standardsete mõõtmetega keystone moodulit saab seda kasutada hõlpsaks snap-in paigaldamiseks näiteks keystone'i kattepaneelides, esiplaatides või pindpaigalduskarpides. Spetsifikatsioon • Pistik: RCA emane (valge) > RCA emane • Kullatud kontaktid • Keystone'i portidele 19,2 x 14,9 mm • Mõõdud (PxLxK): 33,0 x 22,3 x 16,3 mm • Pikkus paneeli ees: 9,5 mm Pakendi sisu • Keystone moodul
ADDER rackmount products are designed to enable easy installation within the rack environment. X-RMK-CHASSIS - 19" 2U rackmount chassis kit for ADDERLink X Series and ADDERLink ipeps
ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA - Universal rackmount plate for all single unit X Series extenders.
ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA-DUAL - Universal rackmount plate for all dual unit X Series extenders.
ADDER® rackmount komplekt RMK12-SH19-tolline 1U rackmount komplekt ADDERLink® INFINITY 4000/3000ADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK12-SH on 19" 1U rackmount komplekt 2 x ADDERLink® INFINITY 4000/3000 seeria seadmetele ja ADDERLink INFINITY Manager ASP-001 seadmetele. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.
See Delocki korpus võimaldab paigaldada M.2 PCIe NVMe SSD-d 2280, 2260, 2242 ja 2230 formaadis, seda saab ühendada USB kaudu arvutiga või sülearvutiga. Vastupidav metallkorpus tagab mälu optimaalse temperatuuri. SSD paigaldamine ilma tööriistadeta Selle korpuse eripära on see, et M.2 SSD paigaldamiseks ei ole vaja tööriistu. Kaane saab väikese survega tahapoole lükata, SSD kinnitatakse kumminipli abil trükkplaadi külge ja seejärel kinnitatakse kaas tagasi, kuni see lukustub. Spetsifikatsioon Liitmikud: välised: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane sisemine: 1 x 67-poolne M.2 võtme M pesa Kiibistik: JMicron JMS583 Toetab M.2 mooduleid formaadis 2280, 2260, 2242 ja 2230 koos M-klahviga. või PCIe (NVMe) baasil võtmega B+M Komponentide maksimaalne kõrgus moodulis: 1,5 mm, toetatakse kahepoolselt kokkupandud moodulite rakendamist Toetab NVM Express (NVMe) Käivitatav Andmeedastuskiirus kuni 10 Gbps LED-indikaator toite ja juurdepääsu jaoks Metallist korpus Mõõtmed (LxSxK): ca. 122 x 36 x 12 mm Hot Plug, Plug & Play Süsteeminõuded Android 9.0 või uuem versioon Chrome OS 72.0 või uuem Linuxi tuum 4.6.4 või uuem versioon Mac OS 10.14.5 või uuem Windows 7/7-64/8.1/8.1-64/10/10-64/11 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Väline M.2 korpus Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 30 cm Kasutusjuhend
