Võrguseadmed

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

Seda Delocki plaadihoidjat saab kasutada 72 mm laiuste trükkplaatide hoidmiseks, et paigaldada neid 15 mm või 35 mm DIN-ribale. Plaadihoidikut saab individuaalselt lühendada eri pikkustega. Pärast lühendamist saab kaks otsakorki uuesti peale panna.     Märkus Delock pakub soovi korral täiendavaid otsakuid. Artikli number: 66064.     Spetsifikatsioon Sobib 72 mm laiustele tahvlitele Keskkonnatemperatuur: -10 °C ~ 70 °C DIN-riba paigaldamine: 15 mm ja 35 mm 4 x paigaldusavad Paigaldusavade läbimõõt: 3,5 mm Kruviaugu samm: ca. 70 mm Materjal: plastik Värv: roheline   Süsteeminõuded 15 mm või 35 mm DIN-kandaal   Pakendi sisu 1 x tahvlihoidja 4 x kruvi 2 x otsakork

Seda Delocki plaadihoidjat saab kasutada 72 mm laiuste trükkplaatide hoidmiseks, et paigaldada neid 15 mm või 35 mm DIN-ribale. Plaadihoidikut saab individuaalselt lühendada eri pikkustega. Pärast lühendamist saab kaks otsakorki uuesti peale panna.       Märkus Delock pakub soovi korral täiendavaid otsakuid. Artikli number: 66064.     Spetsifikatsioon Sobib 72 mm laiustele tahvlitele Keskkonnatemperatuur: -10 °C ~ 70 °C DIN-riba paigaldamine: 15 mm ja 35 mm 4 x paigaldusavad Paigaldusavade läbimõõt: 3,5 mm Kruviaugu samm: ca. 70 mm Materjal: plastik Värv: roheline   Süsteeminõuded 15 mm või 35 mm DIN-kandaal   Pakendi sisu 1 x tahvlihoidja 4 x kruvi 2 x otsakork

Delocki alumiiniumist korpus võimaldab paigaldada M.2 SSD-d 2260, 2242 ja 2230 formaadis, mida saab ühendada USB kaudu arvutiga või sülearvutiga.     Spetsifikatsioon - Ühendus:   väline: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ emane   sisemine: 1 x 67-poolne M.2 võtme B pesa - Kiibistik: Asmedia ASM1351 - Toetab M.2-mooduleid formaadis 2260, 2242 ja 2230 koos SATA-l põhineva võtmega B - Komponentide maksimaalne kõrgus moodulis: 1,35 mm kahepoolne rakendus   toetatud kokkupandud moodulid - Andmeedastuskiirus kuni 6 Gbps - Toite ja juurdepääsu LED-indikaator - Mõõtmed (LxSxK): ca. 105 x 40 x 10 mm - Hot Plug, Plug & Play     Süsteeminõuded - Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.6, Mac OS 10.12. - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port     Pakendi sisu - Väline M.2 korpus - Kruvikeeraja - Paigaldusmaterjal - USB 3.1 Type-A ja USB-C™ kaabel (ca. 50 cm) - Kasutusjuhend