TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.PoE PowerA 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.Fault Tolerance Features dual redundant 12 – 56 VDC power inputs with output alarm relay.Industrial Hardened DesignEquipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slotsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 12 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)Alarm Relay Alarm relay triggered by power failure of primary and/or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Original part number PP6U-5M/G Product name Gembird :UTP Cat6 Patch cord, 5 m, green Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Green
Original part number DN-82020-1 Product name DIGITUS Fast Ethernet Media Converter, SC / RJ45 Producer DIGITUS Class of product Media converter Network protocol and connector type 1 FastEthernet 100BaseTX - RJ45 Network protocol and connector type 2 FastEthernet 100BaseFX - SC Wiring type multimode fibre-optic cable62.5/125 (OM1)multimode fibre-optic cable 50/125 (OM2)UTP - unschielded twisted pair cable, 4 pairsFTP/STP - shielded 4 twisted-pair cable Height 25 mm Width 70 mm Length 93 mm Net weight 0.4 kg Additional information Distance up to 2kmAuto MDI/MDI-XAuto-negotiation of full- and half-duplexCan be mounted in 19" rackin bundle: external AC adapter
Ubiquiti Networks introduces an innovative sector antenna for your Point‑to‑MultiPoint (PtMP) applications, the airPrism® 5 GHz 3x30° HD Sector Antenna AP-5AC-90-HD.The airPrism antenna features significant advances in noise isolation and beam performance to complement the Rocket®5ac Prism™ radios (not included) for co‑location deployments. 3 x 30° Beamwidth Coverage The three Rocket5ac Prism™ radios are installed at the top, middle, and bottom of the airPrism antenna. Each radio independently transmits and receives within its corresponding 30° beamwidth. Powerful Performance Highly resistant to noise interference, the airPrism antenna provides superior beam performance in high-density areas for high-capacity, multipoint networks. Breakthrough Design Mounted on a single airPrism antenna, three Rocket5ac Prism radios maximize throughput in an efficient tower footprint, minimizing installation and tower costs. Product Specifications • Dimensions: 322.6 x 201.5 x 1300 mm (12.7 x 7.03 x 51.18")• Weight: 13.1 kg (28.9 lbs)• Frequency Range: 5.15 - 5.85 GHz• Gain: 22 dBi• HPOL Beamwidth: 3 x 30° (6 dB)• VPOL Beamwidth: 3 x 30° (6 dB)• Electrical Beamwidth: 8° • Electrical Downtilt: 2°• Max. VSWR: 1.75:1• Polarization: Dual-Linear• Cross-Polarization Isolation: 30 dB Min.• Interfaces: (6) RP-SMA Connectors (Weatherproof)• Compatible Radio: Rocket5ac Prism• Wind Loading: 534 N @ 200 km/h (120 lbf @ 125 mph)• Wind Survivability: 200 km/h (125 mph)• Mounting: Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included• ETSI Specification: EN 302 326 DN2• Certifications: CE, FCC, IC
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
TRENDnet’s 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. Ethernet Distance Supports networking distances up to 100m (328 ft.) Connection Interface 1000BASE-T RJ-45 gigabit port Hot-Pluggable SFP Hot-pluggable SFP compatible with a MSA compliant SFP slot Operating Temperature Operating temperature range of 0°– 70 °C (0° – 158 °F)
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT 6, Shielded, FTP-shielded 4 twisted-pair kaabel, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbepunane fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
8 x Gigabit PoE+ ports 61W PoE budget 16Gbps switching capacity Sturdy metal switch Plug and Play installation Use with TRENDnet's PoE Splitter to network and power non-PoE devices The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking. PoE Power A 61W PoE power budget supports up to eight Power over Ethernet devices. Gigabit Ethernet Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations. Compact Design With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation. PoE Supplies up to 30W of PoE+ power per port with a total power budget of 61W. Supports both PoE (802.3af) and PoE+ (802.3at) devices. Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Sturdy metal housing LED Indicators LED indicators convey port status
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
