Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: kollane
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 2 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 3 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
EXTREME ATOM AP30 ACCESS/MESH POINT, DUAL RADIO WIFI 5 WITH CLIENT MODE SUPPORT, 1GE FOR BACKHAUL/BRIDGE, BLE, INTEGRATED TYPE C EU-COMPATIBLE POWER PLUG. CE REGULATORY DOMAIN. INCLUDES EXTREMECLOUD IQ CONNECT AND HIVECARE COMMUNITY
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 19.500 A, erhöhter Berührungsschutz, Master-Slave-Funktion (1x Master / 5x Slave), einstellbare Schaltwelle (ca. 8 bis 80 W), zweipoliger Ein-/Ausschalter, Gesamtleistung max. 16 A / 3.500 W, Stecksystem DE (Stecker-Typ F)
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
DIGITUS Category 6A U-FTP installation cables are manufactured and tested to the ISO/IEC 11801, TIA/-586-C.2 and EN 50173 Category 6A specifications. Every cord consists of 8 color coded AWG 23 Polyethylene insulated conductors. The conductors are twisted together to form 4 pairs with varying lay lengths. Printing details along the outer sheath includes the brand name and item code.
Patchcord cat.6 FTP 1M 10-pack fluke passed red Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors: copper, CCA; sheath: PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Patchcord cat.6 FTP 3M 10-pack fluke passed grey Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors-copper, CCA; sheath-PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
Patchcord cat.6 FTP 0.5M 10-pack fluke passed white Cable type: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: Copper conductors, CCA; sheath: PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
TSF010 on haldamata Ethernet-kommutaator, millel on lame konstruktsioon ja integreeritud DIN-riba kinnitus, et seda saaks kasutada tööstuslikes kappides plug-and-play põhimõttel. See Ethernet-lüliti on kompaktne ja kerge, mõõtmetega 113 x 28 x 50 mm ja kaaluga vaid 142 g. Selle 3-pooluseline toitesisend ja 7-57 VDC pingevahemik teevad sellest paindliku juhtimiseta lüliti, mis on kohandatud tööstuslikuks kasutamiseks. TSF010 on varustatud viie 10/100 Mbit/s RJ45-portiga, mis tagavad usaldusväärse ühenduvuse.3-POOLNE TOITESISENDPaindlik ja tööstuslikuks kasutamiseks kohandatudLÕIKEDA JA KOMPAKTNELame ja kompaktne disain, mis kaalub vaid 142 gINTEGREERITUD DIN-KANDURIGA KLAMBERLihtne paigaldus plug-and-play kasutuselevõtuks7-57 VDCSobiv pingevahemik tööstuslike rakenduste jaoks
