CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features,it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance forall sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning TreeProtocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for yourdemanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hotenvironments two redundant fans will automatically keep the system cool if needed. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding,apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IPheader fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Web-based GUI• 800 Mhz CPU• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Link Aggregation (LACP)• Access Control List• MikroTik neighbour discovery• SNMP v2/v3• rackmount and tabletop Switching resultsCRS317-1G-16S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput239,583.3122,666.737,828.9154,947.413,085.2158,906.4SwitchingNon blocking Layer 2 capacity239,583.3245,333.337,828.9309,894.713,085.2317,812.7SwitchingNon blocking Layer 1 throughput239,583.3161,000.037,828.9161,000.013,085.2161,000.0SwitchingNon blocking Layer 1 capacity239,583.3322,000.037,828.9322,000.013,085.2322,000.0
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e UTP (unshielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
CRS354-48G-4S+2Q+RM Best price and best performance on the market – this 48 port switch will rock any setup, including 40 Gbps devices!If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product Mikrotik aim to set a new price-performance bar – get more features while spending way less!High-end performance for the masses: more 10G ports and even 40G ports, because speed matters.The 48 port champion you’ve been waiting for– the bargain of the decade!This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
The 10 Gbps Direct Attach Cable is an SFP+ compatible cable capable of sustaining 10 Gbps throughput. This cable is perfect for creating short links between switches that deliver 10 Gbps speed throughout your network.
The 802.3bt injector from DIGITUS offers an 85 watt PoE port as a midspan solution. Compact, cost-effective and fully IEEE802.3bt-compliant. The simple solution for remote power supply of wireless access points, IP security camera, VoIP phones, thin clients and other installations with PoE functionality.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
Netgear GS724TPP SMART switch Switches with essential L2 features for SMB networks NETGEAR Smart Managed Pro switches feature L2 and L2+/Layer 3 Lite features, excellent PoE support and improved performance. They are designed for networks that use different types of multimedia, such as video, audio and data, within a single platform. Switches increase network efficiency, reduce network operating costs and facilitate management. These switches are also a perfect solution for cutting-edge small and medium-sized enterprises that are looking for an optimal combination of functionality, efficiency and quality. Designed for large and small multimedia networks PoE and PoE+ support in every configuration VLAN with automatic voice data handling for fast and reliable VoIP telephony deployment VLAN with automatic video support, which, similarly to voice, allows you to accelerate the implementation of industrial camera infrastructure using the IP protocol Static routing helps redirect internal traffic and use network resources more efficiently IGMP and MLD protocol recognition provides advanced multicast filtering With Netgear you will build a network ready for the challenges of the future High performance with non-blocking architecture, 256 VLANs, 100 shared ACL entries, 32 static routes and 512 multicast groups Comprehensive IPv6, QoS and ACL management ensures investment protection and smooth migration to IPv6 networks PoE+ support on all ports on GS510TLP, GS510TPP, GS418TPP, GS728TPv2, GS728TPPv2, GS752TPv2 and GS752TPP SFP ports provide fiber-optic connectivity, and dedicated SFP ports on many models provide additional connection performance Energy Efficient Ethernet (IEEE 802.3az) support provides greater energy savings for unused ports and short cables Advanced QoS with incoming IPv4/IPv6 filtering (ACL) and prioritization (QoS DiffServ) Dynamic VLAN assignment means convenient authentication and access to the network regardless of location Convenient network deployment VLAN with automatic voice data handling for convenient implementation of VoIP telephony VLAN with automatic video support for convenient deployment of IP cameras The ACL wizard makes it easy to configure and access your network Smart Control Center discovers switches, making it easier to deploy, monitor and update firmware The PoE timer allows you to schedule power switching for PoE devices A smart IT department doesn't have to be big Convenient management within the browser interface or the Smart Control Center tool Standards-based technology ensures that any standard devices can be used on an existing network Duplicate firmware increases reliability and increases network uptime
Introducing the NETGEAR GS308EPP PoE+ Gigabit Ethernet Plus Switch with 8 ports PoE+ and a total PoE budget of 124W to power PoE applications such as VoIP phones, IP cameras for surveillance, wireless access points and more.GS308EP includes basic and advanced network management features to help optimize the performance of business networks. Management is also flexible via the easy-to-use web browser-based management GUI. Basic management features include VLANs, QoS, and IGMP Snooping, and advanced management features include advanced per port PoE control and uninterrupted PoE.Use VLANs to separate traffic for better speed and improved bandwidth, QoS to prioritize traffic for better delivery quality and IGMP snooping for optimized multicast performance at Layer 2 which is especially useful for bandwidth-intensive IP multicast applications such as IPTV. Advanced per port PoE controls manage the power of the PoE connected devices by enabling and disabling PoE power per port, PoE prioritization, PoE power limit per port and more. Lastly, unique to NETGEAR, it has uninterrupted PoE. Keep PoE power on even when the switch is updating firmware or performing a software reboot.
TP-LINK Gigabit Smart Switch TL-SG2008 is equipped with 8 gigabit RJ45 ports. The switch provides high performance, enterprise-level QoS, useful security strategies and rich layer 2 management features. TP-LINK’s 8-Port Gigabit Smart Switch TL-SG2008 is especially designed for the small and medium business networks that require efficient network management. TL-SG2008 comes with a comprehensive set of features, such as Link Aggregation Group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service(QoS L2 to L4), Storm Control and IGMP Snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What’s more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
Fast WiFi 6 - Break the gigabit barrier with speeds up to 1201 Mbps (5 GHz) + 574 Mbps (2.4 GHz). Dual Band Wireless - 2.4 GHz and 5 GHz bands for flexible connectivity. Lower Latency Gameplay - OFDMA and MU-MIMO ensure the most efficient WiFi connection for your PC. Improved Security - WPA3 provides the latest security enhancements for personal password protection. Nano design – Small, unobtrusive design allows you to plug it in and forget it is even there. Setup Made Easy - TX20U Nano comes with its driver pre-loaded. Just plug and install.
16x10Base-T / 100Base-TX / 1000Base-T | Switching capacity 32 Gbps | Switching method Store-and-forward | Dimensions 294 x 140 x 44 mm | Unit Net Weight 1.4 kg
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
