8 x Gigabit PoE+ porti 65W PoE võimsuse eelarve 16Gbps kommutatsioonivõimsus IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne ventilaatorita disain Seinale paigaldatav metallist korpus TRENDneti 8-portiline Gigabit PoE+ kommutaator, mudel TPE-TG83, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toitu olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. See kompaktne võrgukommutaator pakub kaheksat gigabitilist PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W. TPE-TG83 PoE+ kommutaatoriga saab ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Sellel on ventilaatorita disain ja mugav võimalus seinale paigaldamiseks. PoE+ 65 W PoE-võimsuse eelarve toetab kuni kaheksat Power over Ethernet seadet.
Hot-swap power supply for the CCR2004 — so you can replace the power supply without having to turn off or even restart the router. Zero downtime!CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point the other one will take over. Then you can use this kit to replace the old power supply — and you don’t even have to restart the router!
Vertically and Horizontally AdjustableAvailable now, the Ubiquiti Networks Window/Wall Mounting kit for NanoStation. The kit comes with interchangeable mounting adapters(suction mount for window, wall screws for wall) so the NanoStation can be easily fitted on a window or wall. Vertically and horizontally adjustable.
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Ports: 8 x1000Base-T (Ethernet/Fast Ethernet/Gigabit Ethernet) Total Ports: 10 Switching Protocol: Ethernet MAC Address Table Size16K Status LED Indicators: Power, Activity Status, Link, PoE võrguseadeing Compliant Standards10 (RJ-45) sügavus (mm): 104 mm kõrgus (mm): 26 mm laius (mm)177.5 mm Package Type: Retail Maksimum Operating Ambient Temperature10 % Mean Time Between Failures: 50000 hr garantii Products Returnable1kg Pack kaal Netto (kg): 1kg Pieces in pack: 1Box kaal Brutto (kg): 1kg Retail Packaging Netokaal Carton: 1kg Retail Packaging Netokaal Plastic: 1kg Packs in Box: 1
airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two screws.
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
