Perfect Managed Switches with Advanced L2/L4 Switching and Security PLANET GS-4210-24T4S and GS-4210-24T4SR are the ideal Gigabit Switches which provide cost-effective advantage to local area networks and are widely accepted in the SMB office network. They offer intelligent L2/L4 data packet switching and management functions, friendly web user interface and stable operation. Besides the popular IPv6/IPv4 management and abundant L2/L4 switching functions, the GS-4210-24T4S and GS-4210-24T4SR come with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T4S and GS-4210-24T4SR are equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 4 additional 100/1000BASE-X SFP interfaces with built-in AC or AC+DC redundant power system. They offer a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-24T4S(R) supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-24T4S(R) supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Redundant AC/DC Power Supply to Ensure Continuous Operation The GS-4210-24T4SR is particularly equipped with one 100~240V AC power supply unit and one 36~72V DC power supply unit to provide an enhanced reliable and scalable redundant power supply, the continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 36~72V DC power supply, the GS-4210-24T4SR is able to act as a telecom-level device that can be located in the electronic room. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24T4S and GS-4210-24T4SR help the SMBs to step in the IPv6 era with the lowest investment as their network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-24T4S and GS-4210-24T4SR can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24T4S and GS-4210-24T4SR allow the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-24T4S and GS-4210-24T4SR are loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. They guarantee the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-24T4S and GS-4210-24T4SR offer comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. They can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Their protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Friendly and Secure Management For efficient management, the GS-4210-24T4S and GS-4210-24T4SR are equipped with web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T4S and GS-4210-24T4SR offer an easy-to-use, platform-independent management and configuration facility. For text-based management, the switches can be accessed via Telnet and the console port. By supporting the standard SNMP, the switches can be managed via any standard management software Moreover, the GS-4210-24T4S and GS-4210-24T4SR offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The GS-4210-24T4S and GS-4210-24T4SR provide 4 extra Gigabit SFP interfaces supporting 100BASE-FX/1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T4S and GS-4210-24T4SR successfully reduce substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T4S and GS-4210-24T4SR are able to operate stably and quietly in any environment without affecting their performance. Department/Edge Security and QoS Switch The GS-4210-24T4S and GS-4210-24T4SR connect up to 24 high-speed workstations in the Ethernet environment, in which their four SFP mini-GBIC interfaces provide an uplink to a department backbone. Moreover, the Switches provide 56Gbps switch fabric and high bandwidth for backbone connection. The GS-4210-24T4S and GS-4210-24T4SR improve the network efficiency and safeguard the network clients with their powerful features: IPv6/IPv4 management Layer 2 to Layer 4 security QoS 802.1x port-based and MAC-based network access authentication security Multicast IGMP snooping The advanced functionality of the GS-4210-24T4S and GS-4210-24T4SR eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-24T4S and GS-4210-24T4SR one of the best and most cost-effective switch solutions for SMBs. High-performance Backbone/Server Farm Switch Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 56Gbps non-blocking switch fabric, the GS-4210-24T4S and GS-4210-24T4SR can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The GS-4210-24T4S and GS-4210-24T4SR can offer the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules with the two SFP ports. FTTX/MAN Application The GS-4210-24T4S and GS-4210-24T4SR apply the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMP v3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With two dual-speed SFP slots built in, the deployment distance of the GS-4210-24T4S and GS-4210-24T4SR can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the GS-4210-24T4S and GS-4210-24T4SR can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. Physical Port 24-Port 10/100/1000BASE-T Gigabit RJ45 copper 4 100/1000BASE-X mini-GBIC/SFP slots RJ45 console interface for switch basic management and setup Reset button for system factory default Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
8 x Gigabit PoE+ porti PoE võimsuse eelarve 120W@24V - 200W@48V 16Gbps kommutatsioonivõimsus Karastatud IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba ja seinakinnitusi Töötemperatuuri vahemik -40° - 75° C (-40° - 167° F) Kaks 24-56 V alalisvoolu sisendit redundantsuse tagamiseks TRENDneti 8-portiline tööstuslik Gigabit PoE+ DIN-Rail lüliti, mudel TI-PG80B, on tööstuslik muutuva pingega lüliti, millel on kaheksa gigabit PoE+ porti ja 200 W PoE-võimsuse eelarve. Kasutajatel on võimalik ühendada kaheksa PoE+ seadet selle tööstusliku muutuva pingega PoE+ kommutaatoriga, et tagada kiire ühenduvus võrku. Tööstuslik muutuva pingega PoE+-lüliti on varustatud vastupidava IP30-klassi metallkorpusega ning see on kavandatud taluma suurt vibratsiooni ja lööki, töötades samal ajal laias temperatuurivahemikus -40° - 75° C (-40° - 167° F) tööstuskeskkonnas. Tööstusliku muutuva pinge lüliti kaks 24-56 V alalisvoolu sisendit tagavad redundantsi koos toitealarmi releega.
8 x Gigabit PoE+ porti 65W PoE võimsuse eelarve 16Gbps kommutatsioonivõimsus IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne ventilaatorita disain Seinale paigaldatav metallist korpus TRENDneti 8-portiline Gigabit PoE+ kommutaator, mudel TPE-TG83, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toitu olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. See kompaktne võrgukommutaator pakub kaheksat gigabitilist PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W. TPE-TG83 PoE+ kommutaatoriga saab ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Sellel on ventilaatorita disain ja mugav võimalus seinale paigaldamiseks. PoE+ 65 W PoE-võimsuse eelarve toetab kuni kaheksat Power over Ethernet seadet.
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
Delocki PCI Expressi kaart laiendab arvutit nelja välise USB 3.2 Gen 1 pordiga. Ühendada saab erinevaid USB-seadmeid nagu dokkimisjaamad, kaardilugeja, väline korpus jne. Tänu USB-portide vertikaalsuunale on võimalik paigaldada madala profiiliga pessa.
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort liidesega seadmete, nt. kuvarid, projektorid või telerid arvutisse või sülearvutisse. Kolmekordse varjestatud kaabel toetab eraldusvõimet kuni Ultra HD (4K @ 60 Hz) ja on allapoole ühilduv Full-HD 1080p-ga. Spetsifikatsioon • Ühendused: 1 x mini DisplayPort isane > 1 x DisplayPort isane • Sisend = mini DisplayPort; Väljund = DisplayPort • DisplayPort 1.2 spetsifikatsioon • Pin 20 pole ühendatud • Kaabli läbimõõt: 32 AWG • Kaabli läbimõõt: ca. 5,5 mm • Vaskjuht • Võrguvarjestus • Kontaktid kullatud • Heli- ja videosignaalide edastamine • Andmeedastuskiirus kuni 21,6 Gb/s • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Värvus: must • Pikkus sh. pistikud: ca. 1 m
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Nailonpunutisega - Kullatud pistikud ja metallist korpus - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: antratsiit - Pikkus koos pistikutega: ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
See Delocki dokkimisjaam võimaldab USB-C™-liidese kaudu ühendada väliselt kuni kaks 2,5″ või 3,5″ SATA HDD- või SSD-ketast. See lahendus ei nõua välist korpust, sest ketta saab ühendada otse dokkimisjaama. Lisaks võimaldab kloonimisfunktsioon kopeerida ühe kõvaketta sisu teisele ilma arvutit kasutamata. Spetsifikatsioon Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ emane 2 x SATA 6 Gb/s 22-pooluseline pesa 1 x alalisvoolu pesa Kiibistik: Asmedia ASM1352R Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti 2,5″ ja 3,5″ SATA HDD / SSD jaoks Sobib kõikidele SATA HDD-dele kuni SATA 6 Gb/s kiirusega Andmeedastuskiirus kuni 6 Gb/s LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta Mõõtmed (LxSxK): ca. 153 x 110 x 62 mm Plug & Play Toiteallika spetsifikatsioon Seina toiteallikas Sisend: V / 50 ~ 60 Hz / 1,5 A Väljund: 12 V / 3 A Maandus väljastpoolt, pluss seestpoolt Mõõdud: ø ca. 2,1 mm, seestpoolt: ø ca. 2,1 mm väljast: ø ca. 5,5 mm pikkus: ca. 10 mm Süsteeminõuded Linuxi tuum 4.9.4 või uuem versioon Mac OS 10.13.3 või uuem versioon Windows 7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Dokkimisjaam Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 80 cm Väline toiteallikas 12 V / 3 A Kasutusjuhend
10xSFP28 | 1xConsole | 1x10/100M | Included Accessories IEC cord, IEC cord, K-54 kit, Rack ears for CRS510 | Dimensions 320 x 185 x 44 mm | Unit Net Weight 2 kg
RG-RAP1200(P), Reyee Wi-Fi 5 1267Mbps Wall-mounted Access Point Dual-radio performance, full gigabit wall-mounted access point Better experience with MU-MIMO under 802.11ac Wave2 Multi-service support with full gigabit ports Easy installation and full compatibility Optimization in one-click mode, achieving better Wi-Fi experience Easy Wi-Fi network construction within 3 minutes
Paigaldusstandard: 35mm DIN rööbas Materjal: Madala süsinikusisaldusega teras Kaal: 57g Komplektis olevad kruvid Philipsi paanipea kruvi #6-32×3/16, 2tk Mõõtmed 82 mm x 46 mm x 20 mm
Delocki audiomuundur teisendab digitaalse audiosignaali analoogseks stereosignaaliks. Näiteks DVD- või Blu-ray-mängija saab ühendada seadme sisendisse ja signaali saab edastada optilise TOSLINK või S/PDIF koaksiaalühenduse kaudu. Väljundipordis edastatakse audiosignaal RCA-liidese kaudu. Spetsifikatsioon - Ühendused: Sisend: S/PDIF: 1 x TOSLINK emane S/PDIF 1 x koaksiaalühendus S/PDIF (emane): 1 x koaksiaalühendus S/PDIF 1 x USB Type Micro-B female (5 V toide): 1 x USB Type Micro-B female (5 V toide) Väljund: 2 x RCA female - Kiibistik: MS8416 - Toetatud proovivõtusagedused: 32 / 44.1 / 48 / 96 / 192 kHz - Bitikiirus 16 - 24 bitti - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 63 x 44 x 23 mm Süsteeminõuded - Digitaalne helisignaal - Toiteallikas, millel on vaba USB Type-A emasport Pakendi sisu - muundur digitaalne > analoog - USB Type-A ja Micro-B tüüpi kaabel, pikkus ca. 30 cm - Kasutusjuhend
See Delocki korpus võimaldab paigaldada M.2 PCIe NVMe SSD-d 2280, 2260, 2242 ja 2230 formaadis, seda saab ühendada USB kaudu arvutiga või sülearvutiga. Vastupidav metallkorpus koos jahutusribadega ülaosas tagab mälu optimaalse temperatuuri. Spetsifikatsioon - Ühendused: välised: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane sisemine: 1 x 67-poolne M.2 võtme M pesa - Kiibistik: JMicron JMS583 - Toetab M.2-mooduleid formaadis 2280, 2260, 2242 ja 2230 koos M-klahviga või PCIe (NVMe) baasil võtmega B+M. - Komponentide maksimaalne kõrgus moodulis: 1,5 mm, toetatakse kahepoolselt kokkupandud moodulite rakendamist - Toetab NVM Express (NVMe) - Käivitatav - Andmeedastuskiirus kuni 10 Gbps - LED-indikaator toite ja juurdepääsu jaoks - Mõõtmed (LxSxK): ca. 102 x 34 x 12 mm - Hot Plug, Plug & Play Süsteeminõuded - Chrome OS - Linuxi tuum 4.6 või uuem - Mac OS 10.13.3 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu - Väline M.2 korpus - Kruvikeeraja - Paigaldusmaterjal - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 30 cm - 1 x termoplaat - Kasutusjuhend
Seda Delocki vöötkoodiskannerit saab ühendada juhtmevabalt arvutiga, sülearvutiga või otse mobiiltelefoni või tahvelarvutiga. Kõiki levinud 1D- ja 2D-viivakooditüüpe saab täpselt registreerida ka pikkade vahemaade tagant. Lisaks tunneb skanner ära ekraanidel ja monitoridel kuvatavad vöötkoodid. Automaatne kohanemine ümbritseva heledusega Skanner kohandub automaatselt vastavalt ümbritseva keskkonna heledusele ja jäädvustab optimaalsetes valgustingimustes kuni 120 skaneeringut sekundis. Vähese ümbritseva heleduse korral valgustab vöötkoodi täiendav valge LED ja seega saab seda kasutada ka kehvades valgustingimustes. Tugev töötlemine Tänu oma vastupidavale konstruktsioonile suudab skanner hõlpsasti taluda kuni 1,80 m kõrguse kukkumise ja sobib seega ideaalselt kasutamiseks tööstuskeskkonnas. Laadimisjaam toimib liidesena Skaneeritud vöötkoodide andmeedastus toimub kas Bluetoothi või 2,4 GHz sagedusala kaudu. Lisaks käsiskänneri laadimisele toimib skänneri induktiivne laadimisjaam ka nii Bluetoothi kui ka 2,4 GHz liidese funktsioonina ning on süsteemiga ühendatud USB-kaabli kaudu. Spetsifikatsioon Laadimisjaam - Ühendus: 1 x USB 2.0 Type-A pistikupesa - Sisendpinge: 5 V töö: max. 1100 mA ooterežiim: max. 700 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must - Kaal: umbes 295 g - Mõõtmed (LxSxK): ca. 180 x 100 x 75 mm - Kaabli pikkus ilma pistikuteta: ca. 1,25 m - Bluetooth standard V 4.1 - 2,4 GHz Vöötkoodi skanner - Dekodeeriv kiip: ARM Cortex 32 Bit - Laetav aku: Li-Polümeer aku 1800 mAh - Resolutsioon: max. 1280 x 800 - Käiviti: skaneerimisnupp - Lugemiskaugus: ca. 30 mm kuni 500 mm - Lugemise täpsus: 3 - 4 millimeetrit - Mõõtmisvahemik: kuni 10 m 2,4 GHz: kuni 100 m - Sisemine mälu: 16 MB - Valguse värvus: nähtav punane LED - Kompensatsioonivalgus: LED valge - Andur: CMOS-pildiandur - Skaneerimiskiirus: kuni 120 skaneerimist sekundis - Skaneerimisnurk: 55° - Ümbritsev heledus: max. 100000 luksi - Sisendpinge: 5 V - Voolutarve: V 5 töö: max. 220 mA ooterežiim: max. 20 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must / oranž - Kaal: umbes 321 g - Mõõtmed (LxSxK): ca. 185 x 100 x 80 mm - Skaneerimiskoodid: Koodid: Code 128 Kood 39 Vahelagunenud 2 5-st EAN-8 / EAN-13 ISBN - 13 Andmemaatriks Micro PDF417 Micro QR PDF417 QR-kood Süsteeminõuded - Android 9.0 või uuem versioon - Bluetooth standard 4.1 või kõrgem - iPad Pro (3. põlvkond) või uuem - Mac OS 10.15.5 või uuem - Windows 8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port dongle'i jaoks Pakendi sisu - Vöötkoodi skanner - USB-laadimiskaabel - Laadimisalus - Kasutusjuhend
See Delocki GSM-antenn võimaldab kasutada erinevaid GSM-sagedusalasid nii sees kui ka väljas. See on täielikult ühilduv GSM, ZigBee 868 MHz / 915 MHz, DECT, Z-Wave ja LoRa 868 MHz / 915 MHz. Spetsifikatsioon - Ühendus: 1 x SMA-pistik - Sagedusvahemik: 824 - 960 MHz 1710 - 1990 MHz - ZigBee 868 MHz / 915 MHz, DECT, Z-Wave, LoRa 868 MHz / 915 MHz. - Antenni võimendus: 5 dBi - Impedants: 50 Ohm - Polarisatsioon: vertikaalne - VSWR: 2,0 - Ülekandevõimsus: 50 W - Töötemperatuur: -30 °C ~ 70 °C - Värv: must - Kaabel: koaksiaalkaabel - Kaabli tüüp: RG-58 - Kaabli värvus: must - Kaabli sumbuvus: 0,6 dB @ 1 GHz meetri kohta - Kaabli läbimõõt: ca 4,95 mm - Kaabli pikkus koos pistikuga: ca 3 m - Antenni pikkus koos magnetilise alusega: ca. 31,9 cm - Magnetilise aluse läbimõõt: ca. 77,0 mm Süsteeminõuded - Vaba SMA-pistikuga seade Pakendi sisu - Antenn