WE4000 Network Adapter AX5400 Wi-Fi 6/6E Bluetooth 5.2 PCIe Tri-Band 2402Mbps + 2402Mbps + 574Mbps Speed Bluetooth 5.2/4.2/4.0 Magnetic antenna base with 1.5 m RF cable Intel Wi-Fi 6E chipset AX210 802.11ax/ac/a/b/g/n
User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Class I Division 2, ATEX Zone 2 certification Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments Introduction The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly. Daisy-Chained Ethernet I/O Connection This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses. Save Time and Wiring Costs with Peer-to-Peer Communications In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik Series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs. User-Definable Modbus TCP Addressing for Painless Upgrading of Existing Systems For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying initial configurations. Users need to locate each device’s networking details, such as I/O channels or vendor-defined addresses, to enable the initial or start address of a SCADA system or PLC. Devices that support user-definable Modbus TCP addressing offer greater flexibility and easier setup. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs. Push Technology for Events When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.
Fluke 283 FC CAT III 1500 V digitaalmultimeeterCAT III 1500 V/CAT IV 1000 V tõeline RMS Fluke 283 FC digitaalmultimeeter seab uue standardi tehnikutele kuni 1500 V alalisvoolu keskkondades. Ükskõik, kas töötate elektrijaama tasemel päikeseenergia (PV) paneelide, tuuleenergia, elektrirongide või andmekeskustega, Fluke 283 FC on loodud ohutuse ja tootlikkuse suurendamiseks, pakkudes samal ajal täpseid, usaldusväärseid ja korratavaid tulemusi.283 FC sisaldab TL175-HV CAT III 1500 V/CAT IV 1000 V ohutusklassiga silikoonist Insert TwistGuard™️ testijuhte, mis võimaldavad teil töötada kindlalt kõrgemate pingete keskkonnas ohutust ohustamata, pakkudes rohkem paindlikkust pinge, millivoolu, takistuse, jätkuvuse või mahtuvuse testimisel. Eraldi valgustatud LCD-ekraan ja valgustatud klaviatuur muudavad töö lihtsamaks nii otsese kui ka vähese valguse tingimustes. Komplektis olev magnetiline riputussüsteem vabastab teie käed ja spetsiaalne kõva kandekott kaitseb teie investeeringut transportimise ajal.Lisafunktsioonid:Äärmiselt täpsed pingemõõtmised täpseks esmase veaotsinguksVoolumõõtmised kuni 60 A AC/DC, et ohutult ja suurema täpsusega teha veaotsingut üksikute moodulite jadades (kasutades valikulist a283 FC traadita voolutangid)Visuaalsed ja helilised polaarsuse indikaatorid sisse/välja lülitamise funktsiooniga aitavad vältida juhuslikke juhtmestiku probleemeKasutaja määratud piirangumõõtur aitab teil teha kiireid otsuseid veaotsingulUnikaalne multimeetri valmisoleku enesekontroll aitab tagada, et teie mõõtur on valmis testimiseksSalvestage ja logige mõõtmised sisemällu ja vaadake neid oma mobiilseadmes Fluke Connect™ kauduFluke 283 FC CAT III 1500V Digital MultimeterFunctionRangeResolutionAccuracyAC volts[1]6.000 V0.001 V1.0 % + 3(45 Hz to 500 Hz)60.00 V0.01 V600.0 V0.1 V2.0 % + 3(500 Hz to 1 kHz)1000 V1 VDC volts6.000 V0.001 V0.09 % + 360.00 V0.01 V600.0 V0.1 V1500 V1 V0.15 % + 2AC mV[1]600.0 mV0.1 mV1.0% + 3 (45 Hz ~ 500 Hz)2.0% + 3 (500 Hz ~ 1000 Hz)DC mV600.0 mV0.1 mV0.09 % + 2Continuity600 Ω1 ΩResistance600.0 Ω0.1 Ω0.5 % + 46.000 kΩ0.001 kΩ60.00 kΩ0.01 kΩ600.0 kΩ0.1 kΩ6.000 MΩ0.001 MΩ50.00 MΩ0.01 MΩ1.5 % + 4Capacitance1000 nF1 nF1.2 % + 210.00 μF0.01 μF100.0 μF0.1 μF9999 μF1 μF10 % typicalFrequency99.99 Hz0.01 Hz0.1 % + 2999.9 Hz0.1 Hz9.999 kHz0.001 kHz99.99 kHz0.01 kHzAC VA (45 Hz ~ 500 Hz)[1]360.0 VA0.1 VA2 % + 1.0 VA3.600 kVA0.001 kVA2 % + 0.01 kVA36.00 kVA0.01 kVA2 % + 0.1 kVA60.00 kVA0.01 kVA2 % + 0.15 kVADC VA[1]360.0 VA0.1 VA2 % + 1.0 VA3.600 kVA0.001 kVA2 % + 0.01 kVA36.00 kVA0.01 kVA2 % + 0.1 kVA90.00 kVA0.01 kVA2 % + 0.25 kVAMin-max avgFor DC functions, accuracy is the specified accuracy of the measurement function ± 12 counts for changes longer than 350 ms in duration.For AC functions, accuracy is the specified accuracy of the measurement function ± 40 counts for changes longer than 900 ms in duration.[1] 150 hours typical, without backlight (Alkaline, 3 AA)> 100 hours typical when connected to wireless current clamp (Alkaline, 3 AA)
Välistingimustes kasutatav 5G-ruuter MikroTik LAMP 5G R16 on välistingimustes kasutatav 5G-ühendusseade, mis on mõeldud kohtadesse, kus suunantenniga ühe kindla tugijaama poole suunamine ei ole ideaalne lahendus. Selle asemel, et tugineda kitsale antenni suunale, kasutab seade isotroopseid antenne, et töötada paigalduskoha ümbruses kättesaadavate võrkudega. Seetõttu sobib see seade linnakeskkonnas kasutamiseks, varuühenduse loomiseks, sadamates, tööstusobjektidel, transpordisõlmedes ja muudes keskkondades, kus ulatuses võib olla mitu mastit ning võrguolud võivad päeva jooksul muutuda. Kui saadaval on parem signaal või muutuvad praegused võrguolud, suudab seade kohaneda ilma, et antenni oleks vaja füüsiliselt ümber suunata. Seade sisaldab kaasaegset 5G SA/NSA modemi ja toetab nii iseseisvat kui ka mitte-iseseisvat 5G-tööd. Selle mobiilsidet toetavad 4×4 MIMO allalaadimiskanal ja 2×2 MIMO üleslaadimiskanal, mis aitavad seadmel kasutada kättesaadavat raadiosidet tõhusalt, kui võrk seda toetab. LTE kategooria 20 ja 3G tugi pakuvad täiendavat mobiilside ühilduvust rakendustes, kus 5G ei ole ainus kättesaadav juurdepääsutehnoloogia. Ühe Gigabit Etherneti pordiga tagab LAMP 5G R16 mobiilse ühenduse kohaliku võrguga traadiga liidese kaudu, mistõttu sobib see välistingimustes kasutatavaks mobiilside lõppseadmeks ruuteritele, lülititele või muudele võrguseadmetele. eSIM-ühendus LAMP 5G R16 on loodud mobiilsideteenuse aktiveerimise lihtsustamiseks, eriti juhul, kui seadmed on paigaldatud välitingimustesse või kasutusele võetud mitmes asukohas. Seade sisaldab nii microSIM-pesa kui ka sisseehitatud eSIM-tuge, mis võimaldab paigaldajatel ja operaatoritel valida füüsilise SIM-kaardi ja kaugjuhtimisega eSIM-profiili vahel. eSIM-võimalus on eriti kasulik, kui seadmeid tuleb aktiveerida ilma neid avamata või kohapeal SIM-kaarte käsitsemata. Operaatorid saavad andmesidepakette kaugjuhtimisega aktiveerida ja uued seadmed kiiremini võrku ühendada, mis on praktiline nii suuremate paigalduste kui ka raskesti ligipääsetavates kohtades asuvate üksikseadmete puhul. eesmärk on aidata kasutajatel ühendust luua vähemate seadistustöödega. Samuti toetab see kolmandate osapoolte eSIM-pakkujaid ja mitut eSIM-profiili. See võimaldab salvestada ühele seadmele erinevate operaatorite pakette ja vahetada neid vastavalt ühendusvajaduste muutumisele. Varuliinide, rändluse seadistuste või mitme operaatori võrkude puhul pakub see suuremat paindlikkust kui ainult ühele füüsilisele SIM-kaardile tuginemine. Seadmes töötab RouterOS v7 litsentsitasemega 3 ning see põhineb kahetuumalisel ARM 64-bitisel platvormil, millel on 512 MB DDR3L-mälu ja 32 MB välkmälu, pakkudes süsteemikeskkonda marsruutimiseks ja võrgu töötamiseks. Ilmastikukindel korpus LAMP 5G R16 on mõeldud nõudlikeks välispaigaldusteks, sealhulgas kohtadesse, mis on avatud vihmale, tolmule, temperatuurikõikumistele ja soolasele mereõhule. IP67-klassiga korpus kaitseb seadet välistingimustes kasutamisel, samas kui EN 60945 merendussertifikaat muudab selle sobivaks mereside keskkondadesse, nagu sadamad, jahisadamad, rannikuinfrastruktuur ja laevad. Töötemperatuuri vahemik -40 °C kuni +70 °C võimaldab seadme kasutamist ka karmides ilmastikutingimustes. Komplektis olev roostevabast terasest kinnitusklamber tugevdab veelgi seadme sobivust välistingimustes ja merenduses kasutamiseks. Seadet saab paigaldada masti või seinale. Paigaldusskeem näitab paigaldamist masti läbimõõduga 25–60 mm ja seinale paigaldamist, kasutades 6 mm eelnevalt puuritud auke tüüblite jaoks. Mõõtmetega 276 × 267 × 133 mm (koos kinnitusega) on seade mõeldud pigem välistingimustes püsipaigalduseks kui laua peale kasutamiseks. Toide tagatakse PoE-In kaudu, toetades standardeid 802.3af/at ja sisendpinge vahemikku 12–56 V. Komplektis on kaasas 24 V 0,5 A toiteadapter ja Gigabit PoE-injektor, mis aitavad tagada vajaliku toiteühenduse Etherneti kaabli kaudu. Sisseehitatud GNSS-tugi hõlmab GPS-i, Glonassi, Galileot, BeiDou ja QZSS-i, võimaldades asukoha määramist sõidukipargi haldamiseks, varade jälgimiseks, kauginfrastruktuuri jaoks ning mitte-kriitiliste asukohapõhiste rakenduste jaoks.
EXTRALINK rack cabinet in black - 12U, 530 × 400 The Extralink rack cabinet is designed for wall mounting in offices, network server rooms and CCTV control rooms. The outer walls are made of cold-rolled steel sheet. Equipped with a tempered glass front door, it can open to the left or right. A shelf is included in the set. Clearly marked cabinet height The vertical rails have the appropriate height marking, which is 12U (from the English unit), while the total cabinet height is 63.4 cm. Removable side panels and glass door Side wall latches allow them to be removed. Locks and keys for the glass door are included. Customisation On the cabinet roof there is a space for installing a fan for better cooling of the devices, and there is also an additional cable entry for pulling out cables. A convenient shelf is also included. Construction: Features: Standard 19’’, welded frame, reliable construction Self-assembly frame construction - easy to carry and transport Wall mounting or standing position Shelf included Removable side panels Cable entry holes on both the top cover and the bottom panel Front tempered glass door with a rotation angle exceeding 180 degrees
The USW-Lite-16-PoE is a fully managed Layer 2 switch with 16x Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-Lite-16-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
AUTO SWITCH Ideaalne sõidukisiseste lahenduste jaoks POE+ 4 x PoE+ porti 802.3af ja 802.3at toega GIGABIT ETHERNET 5 x Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s TÖÖSTUSLIK DISAIN Vastupidav alumiiniumist korpus MADAL SISENDPINGE 9-30 V toitepiirkond PoE jaoks PLUG-N-PLAY Ei vaja konfigureerimist TSW101 on Teltonika Networks'i esimene autodele pühendatud haldamata kommutaator. Varustatud viie Gigabit Ethernet pordiga, millest neli toetavad IEEE802.3af ja IEEE802.3at PoE+ standardeid. Lai valik toetatud toitepingeid (9-30 VDC) ja kompaktsed mõõtmed võimaldavad seda sobitada paljudesse sõidukite rakendustesse. See seade, mis on liigitatud toiteallikaseadmeks (PSE), võimaldab tsentraliseerida toiteallikaid, pakkudes kuni 30 vatti ühe pordi kohta ja maksimaalset väljundvõimsust 60 vatti. 10/100/1000 Mbit/s Ethernet-portid lihtsate, suure ribalaiusega lahenduste jaoks. Ideaalne nii sõidukisisese toite kui ka Ethernet-andmesideühenduse samaaegseks pakkumiseks.
The Ubiquiti UCG-Max is designed to provide a robust networking solution with versatile functionality. It operates effectively across a range of temperatures from -10°C to 40°C, ensuring adaptability in diverse environments. The system supports a variety of data link protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, and 2.5 Gigabit Ethernet, making it suitable for multiple applications.Equipped with a powerful Quad Core ARM Processor running at 1.5 GHz and 3 GB of DDR4 SDRAM, the UCG-Max can handle high traffic with an impressive IDS/IPS throughput of 1 Gbps. The device also emphasizes security and efficiency with cloud management capabilities, a DHCP server, and multiple VPN options such as OpenVPN and L2TP VPN client. With its sleek desktop form factor and various connectivity technologies, this gateway caters to both wired and wireless networking needs, ensuring seamless and secure Internet access.
UniFi Switch 48 is a fully managed Layer 2 switch with (48) Gigabit Ethernet ports and (4) 1G SFP ports for fiber connectivity.The UniFi Switch 48 features a rich set of Layer 2 capabilities and fanless silent cooling for use as an access layer switch. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.
The Ubiquiti UniFi Pro XG 8 PoE delivers network performance, suitable for demanding environments. This switch supports a capacity of 1000 IPv4 routes and 128 ARP entries, allowing seamless connectivity for multiple devices. With eight versatile ports, including 10/100/1000/2.5G/5G/10GBase-T and two 10 Gigabit SFP+ connections, the Pro XG facilitates robust networking solutions. Its PoE budget of 155 W ensures that connected devices receive sufficient power, streamlining installation and management. Designed for reliability, the Pro XG operates within a temperature range of -5°C to 45°C and maintains performance in varying humidity levels of 10% to 90%. The switch incorporates features such as flow control, VLAN support, and quality of service (QoS), enhancing network performance and security. With support for Link Aggregation Control Protocol (LACP) and advanced IGMP configuration, managing larger networks becomes straightforward. The fanless design ensures silent operation, suitable for office or home environments.
RT-BE86U Next Level Performance Dominate your network with blazing performance. For those who demand the absolute best, today and tomorrow, the ASUS RT-BE86U is powered by next-level WiFi 7, delivering lightning-fast dual-band speeds of up to 6800 Mbps for your connected living. The RT-BE86U boasts a monster 20G combined network capacity, unlocking cutting-edge 10G networking with a 10 Gbps WAN/LAN port and up to four 2.5 Gbps LAN ports. Meanwhile. the new ASUSWRT 5.0 ensures a worry-free network experience from end-to-end and 24/7.
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
hEX refresh The classic hEX refresh: same price, twice the performance! The staple of affordable routing for every home is back – stronger than ever due to the modern ARM CPU and extra RAM. The affordable, reliable router you know and trust is now stronger than ever. With the latest refresh, the hEX delivers twice the performance for the same great price. Whether you’re looking for a rock-solid solution for your home or small office, hEX ensures seamless and stable connectivity with a powerful upgrade: we’ve increased the RAM from 256 MB to 512 MB, and replaced the CPU with a modern ARM dual-core workhorse! Depending on your configuration, the performance increase can reach 100-134%! With 5x Gigabit Ethernet ports, hEX is the most cost-effective way to interconnect your main home or office devices. And you can use the full-sized USB port to add extra storage to stream high-quality media across devices!
Võrratu traadita jõudlus UniFi Dream Router 7 (UDR7) on võimas võrgulahendus mis on loodud kaasaegsete kodude ja ettevõtete kasvavate vajaduste rahuldamiseks. Wi-Fi 7 (802.11be) ruuter pakub enneolematuid traadita kiirusi ja tõhusust tagades paljude seadmete sujuvat ühenduvust. UDR7 määratleb oma tugeva funktsioonikomplektiga uuesti kasutajate ootused võrgu jõudluse ja töökindluse osas. UDR7 kasutab uusimat Wi-Fi 7 tehnoloogiat et tagada erakordne traadita side jõudlus kolmes sagedusalas. 6 GHz sagedusala pakub kiirust kuni 5 7 Gbit/s 5 GHz sagedusala kuni 4 3 Gbit/s ja 2 4 GHz sagedusala kuni 688 Mbit/s. Iga sagedusala kasutab 2x2 MIMO-konfiguratsiooni mis tagab tõhusa andmeedastuse ja -vastuvõtu. See kolmel sagedusribal põhinev seadistus mitte ainult ei suurenda üldist võrgumahtu vaid vähendab ka häireid pakkudes stabiilset ja kiiret ühendust selliste tegevuste jaoks nagu voogedastus mängimine ja videokonverentsid. Põhjalik võrgu haldamine UDR7 pakub mitmeid võrguhaldus- ja turvafunktsioone. See sisaldab riigipõhist tulemüüri rakendustundlikku 7. kihi tulemüüri pakettide süvakontrolli (DPI) ja sissetungitõrje süsteeme (IPS/IDS) millel on üle 20 000 CyberSecure'i poolt pakutava allkirja. Lisaks toetab UDR7 VLAN- ja alamvõrgupõhist liikluse segmenteerimist täiustatud QoS-i dünaamilist marsruutimist OSPF-iga ja integreeritud RADIUS-serverit granuleeritud võrgu kontrollimiseks. UDR7 on täielikult integreeritud UniFi rakenduskomplektiga toetades rakendusi Network Protect Access Talk ja Connect. See integratsioon võimaldab erinevate võrgufunktsioonide tsentraliseeritud haldamist lihtsustades kasutajakogemust. Marsruuter suudab hallata üle 30 UniFi seadme ja toetab rohkem kui 300 samaaegset kasutajat mis teeb sellest skaleeritava lahenduse kasvavatele võrkudele. Kas koduse seadistuse või väikese või keskmise suurusega ettevõtte jaoks UDR7 pakub terviklikku võrgulahendust. Mitmekülgne ühenduvus UDR7 on varustatud mitmesuguste pordiga et rahuldada erinevaid võrguvajadusi. Sellel on üks 10G SFP+ port ja üks 2 5 GbE RJ45 port WAN-ühenduste jaoks mis pakub paindlikke võimalusi internetiühenduse loomiseks. LAN-ühenduseks on kolm 2 5 GbE RJ45 porti sealhulgas üks 15 4 W eelarvega PoE-port mis võimaldab ühilduvate seadmete näiteks pääsupunktide või IP-kaamerate otsest toitlustamist. Lisaks sisaldab ruuter eelinstallitud 64 GB microSD-kaarti mille laienduspesa on saadaval edasiste salvestusruumi vajaduste rahuldamiseks. UDR7-l on kompaktne lauaarvuti kuju mis muudab selle sobivaks erinevatesse keskkondadesse. Sellel on 0 96-tolline olekuteade süsteemi teabe kuvamiseks ning see toetab haldamist Etherneti ja Bluetoothi kaudu pakkudes paindlikku konfigureerimist ja järelevalvet. Sisemine 50 W AC/DC-toiteallikas tagab usaldusväärse töö ning maksimaalse energiatarbimisega 26 W (ilma PoE-väljundita) on UDR7 nii võimas kui ka energiasäästlik.
The Ubiquiti UniFi UACC-Adapter-AC-210W power adapter is designed to deliver reliable performance with a polycarbonate construction that ensures durability and safety. Operating within a temperature range of 0°C to 40°C, this adapter withstands various environmental conditions while maintaining efficiency. With an input voltage range of AC 100 - 240 V and a voltage output of 54 V, it provides a power output of 210 watts, catering to diverse user needs.This wall-mountable adapter is equipped with a 1.5 m cord, allowing for flexible installation options. It meets UL 11353 standard compliance, reinforcing its credibility and safety in usage. Ideal for home and professional settings, the Ubiquiti UniFi power adapter offers energy solutions for all compatible Ubiquiti devices.
Travel-Sized Design – Conveniently small and light to pack and take on the road, creating Wi-Fi network via Ethernet, 3G/4G USB modem or WISPDual Band AC750 Wi-Fi – Strong, fast connection for HD streaming on all your devicesOne Switch for Multiple Modes – Perfect for Wi-Fi at home, your hotel room or on the roadFlexible Power – Micro USB port to an adapter, portable charger or laptopVersatile USB – For file sharing or internet access from a 3G/4G USB modem
BE6500 Dual-Band Wi-Fi 7 Router 6.5 Gbps Dual-Band WiFi 7: Enables your devices to run at full speed. Enjoy fluent 4K/8K streaming, immersive AR/VR gaming, and blazing-fast downloads. Multi-Link Operation (MLO): Transmits data with Wi-Fi 7 clients across multiple bands simultaneously to increase throughput, reduce latency, and improve reliability for various networking behaviors. 2.5G Wired Connection: 1× 2.5 Gbps WAN port, 1× 2.5 Gbps LAN port and 3× 1 Gbps LAN ports offer high-speed data transmissions. Maximized Coverage: 6× external antennas along with Beamforming deliver more capacity, stronger and more reliable connections, and less interference. EasyMesh-Compatible: Works with EasyMesh routers and range extenders to form seamless whole home Mesh WiFi, preventing drops and lag when moving between signals. Easy Setup and Use: Network management has never been easier with the Tether app. TP-Link HomeShield: Enhanced security defends against the latest cyber threats. Great Compatibility: Supports all Wi-Fi generations and devices and all internet providers.
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
