DIN LATT Sisseehitatud, integreeritud DIN-kinnitus KOMPAKTNE 102 x 25 x 81,5 mm GIGABIT ETHERNET 4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s 7-57 V Lai valik toetatud toitepingeid KESTVUS Vastupidav alumiiniumist korpus -40 °C KUNI 75 °C Lai töötemperatuurivahemik TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus. Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid. TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega. 10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime. 2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
The Ubiquiti repeater and transceiver module enhances and extends your network's reach. With its Ethernet 1000Base-BiDi connectivity, it provides a reliable, wired connection that supports high-speed data transfer rates of up to 1.25 Gbps. This plug-in module can extend the network coverage up to 3 km, making it suitable for larger spaces needing robust connectivity.Engineered for durability and safety, the module meets IEC/EN 60825-1:2014 Class 1 standards, ensuring it operates safely within a broad temperature range from 0°C to 70°C. Its LC single-mode connectors allow for seamless integration with existing network infrastructure, making it a versatile addition to any setup. Whether you're looking to enhance your network's performance or extend its reach, the Ubiquiti repeater and transceiver module provides a reliable solution.
TSW202 on esimene Teltonika Networks'i hallatav PoE+ kommutaator, mis on loodud selleks, et pakkuda granuleeritud võrgu haldamise võimalusi, tsentraliseerides samal ajal voolu jaotamist. See PoE+-lüliti võimaldab paindlikkust lahenduse haldamisel ja toiteallikaga varustamisel ning parandab M2M-sidet, toetades paljusid tööstuslikke protokolle, sealhulgas EtherNet/IP, Profinet ja MRP. TSW202-l on 2 suure jõudlusega SFP-porti pikamaa valguskaabelühenduseks ja 8 Gigabit Ethernet-porti, millest igaüks pakub 30 W võimsust. HALDATAVAD VAHENDIDL2 koos täiendavate L3-funktsioonidega täiustatud haldamiseks ja kontrollimiseksPOE+ JA SFP8-portiline PoE+ kommutaator koos 2 SFP-portiga valguskaabelühenduseks PROFINET JA MUUDToetab Profinet'i automaatseks andmetöötluseks koos teiste protokollidega, nagu EtherNet/IP ja MRP.TSWOSTeltonika Networks OS kommutaatoritele, intuitiivselt kujundatud lõpmatute konfiguratsioonide jaoks.
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
Deco XE75 Hot Buys AXE5400 Tri-Band Mesh Wi-Fi 6E System Whole Home Wi-Fi 6E - Cover up to 7,200 sq. ft. with seamless, next-generation Wi-Fi and eliminate dead zones and buffering All-New 6GHz Band - Experience the latest Wi-Fi frequency, eliminating interference from all your legacy devices. The 6GHz band also provides a powerful, dedicated backhaul that further improves the Wi-Fi performance of non-6E devices True Tri-Band Speed - All three Wi-Fi bands work together to unlock total network speeds of up to 5400 Mbps for up to 200 devices AI-Driven Mesh - Connects your home under one name and password, while providing the best connections as you move from room to room TP-Link HomeShield - Keeps your home network safe with cutting-edge network and IoT protection features Easier than ever to set up - The Deco app walks you through setup step by step Universal Compatibility - Backward compatible with all generations of Wi-Fi and works with any Internet Service Provider (ISP) and modem
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
TSW210 INDUSTRIAL ETHERNET SWITCH The TSW210 is an Ethernet switch offering a perfect combination of Gigabit Ethernet and SFP. Eight Ethernet ports allow you to quickly and easily connect multiple devices to the network, without the need for further configuration. SFP enables remote devices to be enabled while maintaining high speed and reliability.
ZTE G51F 5G ODU MC7510 Router Expand your connection with a strong signal and wide coverage. Ultra-fast 5G-A network with Sub-6 GHz NSA&SA dual-mode low-band 4MIMO design up to 3.6 Gbps Dual-band Wi-Fi 7 Ultra-wide 110-degree coverage 13 dBi AI ultra-high-gain antenna Algorithm 5.0 2.5G POE adapter Compact design, easy installation Extremely compact design IP65 protection against water and dust Quick installation on a window, wall, pole, or desk Ultra-thin power cable with 1.0 mm window entry
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
Nutikas 5G-ühendus Teltonika RUT276 RedCap 5G-ruuter on järgmise põlvkonna ühenduslahendus, mis on loodud selleks, et tuua 5G-tehnoloogia kõige väärtuslikumad eelised tööstuslikesse ja IoT-rakendustesse, ilma täismahulise 5G-riistvara kulude ja keerukuseta. RedCap (Reduced Capability) arhitektuuril põhinev seade on optimeeritud rakenduste jaoks, mis nõuavad 4G-st suuremat läbilaskevõimet ja väiksemat viivitust, säilitades samal ajal tõhususe ja taskukohasuse. Seade saavutab 5G Sub-6GHz iseseisvates võrkudes allalaadimiskiiruse kuni 223 Mbps ja üleslaadimiskiiruse kuni 123 Mbps, tagades kiire ja reageeriva andmeedastuse kaasaegsetele ühendatud süsteemidele. Erinevates võrgukeskkondades töökindluse tagamiseks toetab ruuter ka 4G LTE Cat 4 varuvõimalust, pakkudes kuni 195 Mbps allalaadimis- ja 105 Mbps üleslaadimiskiirust, kui 5G pole kättesaadav. Lisaks tagab integreeritud kahe SIM-kaardi funktsioon koos automaatse varuvõimalusega katkematu ühenduse, lülitudes signaali kadumise või võrgu halvenemise korral sujuvalt ühe operaatori vahel teisele. RUT276 pakub ka mitmekülgset traadita ühenduvust standardiga IEEE 802.11b/g/n (Wi-Fi 4), toetades mitmeid töörežiime, sealhulgas juurdepääsupunkti (AP), klienti (STA), võrgustikku (802.11s) ja mitme juurdepääsupunkti (Multi-AP) režiimi. Need režiimid võimaldavad paindlikke kasutusvõimalusi, alates eraldiseisvatest seadmetest kuni hajutatud traadita infrastruktuurideni. Täiustatud traadita optimeerimistehnoloogiad, nagu kiire rändlus (802.11r), raadioressursside mõõtmine (802.11k) ja BSS-ülemineku haldus (802.11v), tagavad stabiilse jõudluse dünaamilistes keskkondades liikuvate klientidega. Toetades kuni 50 samaaegset traadita ühendust ning pakkudes selliseid funktsioone nagu kliendi isoleerimine, SSID peitmine ja MAC-põhine juurdepääsukontroll, pakub RUT276 nii skaleeritavust kui ka kontrolli, mis teeb sellest ideaalse valiku professionaalseteks IoT- ja tööstusvõrgustiku rakendusteks. Suurepärane integreeritavus Teltonika RUT276 on spetsiaalselt loodud toimima usaldusväärse sidepõhina tööstus- ja masinatevahelistes (M2M) keskkondades, kus koostalitlusvõime ja protokollide ühilduvus on üliolulised. Selle ruuteri peamine eelis on integreeritud RS232 ja RS485 jadaliidesed, mis võimaldavad otsest suhtlust mitmesuguste tööstusseadmetega, nagu PLC-d, andurid, SCADA-süsteemid ja vanemad masinad. RS485-liides töötab pooldupleksrežiimis (2-juhtmeline), tagades tõhusa andmevahetuse tüüpilistes tööstuslikes bussikonfiguratsioonides. Need jadaliidesed toetavad laia valikut töörežiime, sealhulgas Serial over IP, mis võimaldab juurdepääsu vanematele jadaseadmetele kaasaegsete IP-võrkude kaudu. Lisafunktsioonid hõlmavad MODBUS-värava võimalusi tööstusautomaatikaks, konsooli juurdepääsu seadmete haldamiseks, modemi emulatsiooni ja NTRIP-kliendi tuge täppispositsioneerimise rakendustele. Võrgu konfigureerimine ja haldamine on paindlik, toetades nii pordipõhiseid kui ka sildipõhiseid VLAN-e, mis võimaldab võrguliiklust turvaliselt ja selgelt eraldada. Integreeritud DHCP-server toetab staatilist ja dünaamilist IP-aadresside jaotamist, edastamisfunktsiooni ja täiustatud rendihaldust koos wildcard-MAC-aadressidega. Administraatorid saavad seadme porte täielikult kontrollida, jälgides nende staatust, reguleerides edastusparameetreid ning aktiveerides või deaktiveerides liideseid vastavalt vajadusele. Turvalisust tugevdab võimas tsoonipõhine tulemüür, mis toetab IPv4 ja IPv6, jälgib aktiivseid ühendusi, filtreerib liiklust määratud reeglite alusel ning võimaldab DMZ-i seadistamist. Autentimise valikud hõlmavad eelnevalt jagatud võtmeid, X.509 digitaalsertifikaate, TACACS+ ning nii sisemisi kui ka väliseid RADIUS-servereid, tagades ettevõttetasemel juurdepääsukontrolli. OpenVPN võimaldab mitmel kliendil ja serveril töötada samaaegselt kuni 27 krüpteerimisvalikuga, samas kui QoS ja Smart Queue Management aitavad tähtsat andmeliiklust prioriseerida. Vastupidav konstruktsioon RUT276 on loodud töötama usaldusväärselt nõudlikes tööstuskeskkondades, ühendades endas kompaktse vormi ja vastupidava alumiiniumkorpuse, mis tagab pika kasutusaja, hea soojuse hajumise ja vastupidavuse mehaanilisele koormusele. Seadme konstruktsioon võimaldab mitmesuguseid paigaldusvõimalusi, sealhulgas DIN-siinile, seinale ja tasasele pinnale. Ruuter on konstrueeritud stabiilseks tööks muutuvates toiteoludes, toetades laia sisendpinge vahemikku 9–57 VDC. Integreeritud kaitsemehhanismid hõlmavad vastupooluse kaitset ja üle 58 V (10 µs) pingetõusu kaitset, mis kaitsevad seadet elektriliste häirete eest. Lisaks standardse 2-pinilisele tööstuslikule DC-pistikule toetab RUT276 nii aktiivset PoE-d (802.3af klass 0) LAN-porti kaudu kui ka passiivset PoE-d (16–57 VDC). Hoolimata oma arenenud võimekusest on seade äärmiselt energiatõhus, tarbides ooterežiimis alla 2 W ja tippkoormusel alla 3,5 W, mis teeb selle sobivaks energiatõhusust hindavatesse rakendustesse. Sees töötab ruuter Mediatek 580 MHz MIPS 24KEc protsessoriga, millele on lisatud 128 MB DDR2 RAM-mälu ja 32 MB SPI-välkmälu, tagades stabiilse ja kiire süsteemi jõudluse. RUT276 töötab OpenWrt-põhise Linuxi operatsioonisüsteemi RutOS-i alusel ja pakub laialdasi konfiguratsiooni- ja kohandamisvõimalusi. Haldamine on võimalik veebiliidese (HTTP/HTTPS) ja käsurealiidese (CLI) kaudu ning kaugfirmware'i uuendused FOTA kaudu, sealhulgas automaatsed uuendusteated. Laienemisvõimalusi toetab Micro SD-kaardi pesa (kuni 2 TB), mis võimaldab mälu laiendamist, failide jagamist (Samba) ja DLNA-teenuseid.
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMmodulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsnever possible before.The SXT ac is a new member in our 802.11ac product lineup, currently two models areavailable — with regular 28 degree antenna, and the SA model with a 90 wide beamwidthsector antenna. Also supports 802.11a/n mode and is compatible with all legacyRouterBOARD devices, including Nstream and Nv2 protocols. Both devices come withGigabit Ethernet.• 1300mW RF output• extended temperature range -30C to +80C• up to 540Mbps throughput• low latency Point to Point
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections.Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
