The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT 6, Shielded, FTP-shielded 4 twisted-pair kaabel, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbepunane fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
Industrial LTE Cat 4 Gateway Board TRB140 is equipped with a single Ethernet port, Digital Inputs/Outputs and micro-USB port. TRB140 compact design makes this Gateway perfect for an application where a sole gadget must be granted reliable Internet connectivity. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.MobileLTE(Cat4)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTEEthernet1 x 10/100/1000 MbpsInput/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketConfiguration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)Remote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight35 g
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 plug Wiring type: FTP-shielded 4 twisted-pair kaabel Lisaandmed: This splitter enables you to double a fixed võrguseade connection, without the need, 8P8C LAN FTP port combiner/splitter adapter värv: Aluminum kõrgus: 25 mm laius: 68 mm pikkus: 200 mm
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
The Lanberg NC-1000-01 is a versatile SuperSpeed USB cable that functions as an external network adapter. This compact device, with a length of 15 cm, connects easily using a single RJ-45 connector. Designed to support a range of data link protocols including Gigabit Ethernet, Fast Ethernet, and standard Ethernet, it ensures reliable wired connectivity. The adapter is USB-powered, making it simple to use without needing an external power source, further enhancing its portability. With integrated Wake On LAN (WOL) functionality and support for full duplex and half duplex modes, this network adapter meets various networking needs while providing performance in data transfer.
Netgear 10 Gigabit SR SFP+ Module. Andmete edastamise maksimaalne määr: 10000 Mbit/s, Kaabeldustehnoloogia: 10Gbase-SR. Ühenduvustehnoloogia: Juhtmega ühendatud. Maksimaalne ülekandekaugus: 300 m. Liides: LC
HGO-antenna-OUTDual-band screw-on outdoor antennaDual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!
Schutzkontakt-Steckdosenleiste, mit fünf Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, diverse Montageoptionen, Stecksystem DE (Stecker-Typ F)
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
This M.2 docking station by Delock enables the installation of an M.2 PCIe NVMe SSD and it can be connected via USB to the PC or laptop. The included USB cables allow the connection to a free USB Type-A or USB-C™ port. Ideal test equipment The memory is simply plugged into the robust metal housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly. Specification • Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female 1 x 67 pin M.2 key M slot • Chipset: Asmedia ASM2362 • Supports M.2 modules with key M or key B+M based on PCIe (NVMe) • Supports NVM Express (NVMe) • Bootable • Data transfer rate up to 10 Gbps • LED indicator for power and access • 1 x On / Off switch • Metal housing • Dimensions (LxWxH): ca. 49 x 49 x 12 mm • Hot Plug, Plug & Play System requirements • Chrome OS 78.0 or above • Linux Kernel 4.3 or above • Mac OS 10.15.2 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port or • PC or laptop with a free USB Type-A port Package content • M.2 docking station • Cable USB-C™ male to USB-C™ male, length ca. 30 cm • Cable USB-C™ male to USB Type-A male, length ca. 30 cm • User manual
