The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Introducing the Ubiquiti LiteAP AC airMAX (LAP-GPS), the latest high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LAP-GPS was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these access points operates in the worldwide, licence-free 5 GHz frequency range with high-performance speeds. The LAP-GPS combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range, with cost-effective value.Key FeaturesPart of the Ubiquiti LiteAP AC rangeIncludes Pole Mounting KitRevolutionary Operating SystemAccess Point PtMP airMAX Mixed ModeairMAX AC Protocol SupportLong-Range Point-to-Point (PtP) Link ModeSelectable Channel WidthPtP: 10/20/30/40/50/60/80 MHzPtMP: 10/20/30/40 MHzAutomatic Channel SelectionTransmit Power Control: Automatic/ManualAutomatic Distance Selection (ACK Timing)Strongest WPA2 SecurityairMagic Channel Selection ToolDynamic Configuration ChangesInstant Input ValidationHardware OverviewThe LAP-GPS delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor.GPS Sync SupportThe LAP-GPS supports GPS Sync for faster, more scalable, carrier-class networks. Precise GPS frame synchronisation enables co-located LAP-GPS devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability. In a cost-effective WISP deployment, the LAP-GPS is used as an Access Point in an airMAX AC Point-to-MultiPoint network.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 plug Wiring type: FTP-shielded 4 twisted-pair kaabel Lisaandmed: This splitter enables you to double a fixed võrguseade connection, without the need, 8P8C LAN FTP port combiner/splitter adapter värv: Aluminum kõrgus: 25 mm laius: 68 mm pikkus: 200 mm
WEEE tax: No Gross depth (mm): 220.00 mm Gross height (mm): 390.00 mm Gross weight: 8.78 kg Gross width (mm): 390.00 mm Net weight: 8.58 kg Packing quantity: 1.00 pc(s) PET: 5.00 g Tare weight (kg): 0.20 kg Volume (m3): 0.03 m³ Other features: CCA copper mixture for SOHO applications, AWG 24/7 (stranded), PVC • non-terminated flexible data-/patchcable for Home/indoor using • unshielded twisted-pair LAN cable • Meets requirements for SOHO applications (Small Office, Home Office) up to a max. transmission length of 40 m! Producer product name: CAT 6 network cable, U/UTP, grey, 305 m Producer product family: 93885
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
Lihtne paigaldus 8 x Gigabit PoE+ porti Võtab DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. DIP-kommutaator toetab VLAN-portide eraldamist ja QoS-i. 16 Gbps lülitusvõimsus 65W PoE eelarve Seinale paigaldatav disain Vastupidav metallist lüliti Kasutage koos TRENDneti PoE jagajaga, et ühendada võrku ja toita mitte-PoE-seadmeid 8-portiline Gigabit Long Range PoE+ Switch, mudel TPE-LG80, edastab andmeid ja toite üle Ethernet-kaabli PoE-seadmetele, nagu pääsupunktid, VoIP-telefonid ja IP-kaamerad. See toetab nii PoE- kui ka PoE+-seadmeid, mille PoE-võimsuse eelarve on 65 W. Võta DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel, et pikamaa PoE-installatsioonid saaksid toimida. Ühendage ja mängige see tugev metallist lüliti usaldusväärse kiire PoE-võrgu loomiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. PoE+ võimsus 65 W PoE-võimsuse eelarve toetab kuni kaheksat Power over Ethernet seadet. Gigabit Kaheksa gigabit-porti pakuvad 16 Gbps lülitusvõimsust, et toetada servavõrkude paigaldamist. Pikaulatuslik PoE+ kommutaator Võta DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps juures. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta, mille koguvõimsuse eelarve on 65 W. Pordid Kaheksa gigabitilist PoE+ porti Pikaulatuslik PoE+ kommutaator Võtab DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 ft.) kaugele ulatuvate PoE-installatsioonide jaoks. Portide isoleerimine DIP-lüliti on ideaalne järelevalvevõrkude rakenduste jaoks, kuna see võimaldab ka portide isoleerimist. Lülitusvõimsus 16 Gbps lülitusvõimsus Korpus Seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad PoE ja pordi olekut
The LevelOne WAB-6010 is a managed, outdoor single-band 802.11n wireless access point, capable of 300 Mbps wireless internet speeds. The device runs on 2.4 GHz frequency, and can be used as part of a managed network when controlled by the LevelOne WAC-2000/WAC-2003 Wireless LAN Controller. LevelOne WAB-6010 also offers PoE, removing the need for an external power supply, which makes it easy to install. Advanced weatherproof design, rated to IP65 means the WAP is designed for outdoor deployments, and can withstand rain, humidity, dust, snow and extremely hot conditions. A fast, versatile and secure access point for a wide variety of outdoor network requirements.Share your wireless network up to 300MbpsCompatible with IEEE 802.11b/g/n wireless standardsMulti-operation modes to suit different wireless applicationsDual power support: 12V DC/PoE (IEEE 802.3at)Weatherproof IP65-rated housingProvides up to 4 SSIDs to separate network traffic and enhance security
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 2 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1.5 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
The DIGITUS Industrial Gigabit switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple Plug-and-Play system allows the Industrial Gigabit switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit switch is a flexible, cost-effective solution for the industrial environment.
10G-ready rackmount 16-port 1U patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Supports ANSI/EIA/TIA 310-D, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
