10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
Elegant Industrial DesignAvailable in white or black, the sleek UniFi WiFi BaseStationXG is a versatile access point with multiple mounting options to suit your application. Designed for Stadiums and Event VenuesFeaturing maximum wireless performance combined with wireless security, the UniFi WiFi BaseStationXG is ideal for ultra high density environments, such as event venues, festivals, and stadiums, where there are numerous clients in a relatively small space. Superior Capacity for Large CrowdsFeaturing low-latency QoS (Quality of Service), the UniFi WiFi BaseStationXG supports up to 1500 clients with 12 MU-MIMO chains (500 clients with 4 MU-MIMO chains per client radio). RF Energy SteeringTrue cellular Wi-Fi using multiple APs – its selectable directional beamforming antenna allows for cell size optimization to maximize coverage.RF Channel FilteringProvides isolation for seamless parallel radio operation. Spectral Security The UniFi WiFi BaseStationXG delivers unprecedented wireless awareness and security, including tools for real-time spectrum monitoring, airtime utilization analytics, and intrusion detection/prevention. Using a persistent spectral scan, the AP constantly monitors the RF environment to check for both potential malicious activity and the best channel for network performance.
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall