10GBASE-SR SFP+ Multi Mode LC Module 550 m (1,804 feet) with DDMTEG-10GBSR (Version v1.0R)Hot-pluggable SFP+ transceiverSFP+ MSA compliantSupported throughput up to 10.5 GbpsMulti Mode fiber for distances up to 550 m (1,804 feet)850 nm wavelengthDuplex LC connectorDigital Diagnostics Monitoring (DDM) supportOperating temperature: 0 to 70 °C (32 to 158 °F)Single 3.3 V power supply
TRENDnet’s hot-pluggable TEG-10GBS10, 10GBASE-LR SFP+ Single Mode LC Module, works with a MSA compliant SFP+ slot. This Single Mode transceiver spans distances up to 10 km (6.2 miles), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.Hot-Pluggable SFP+Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slotFiber WavelengthCompatible with Single Mode 1310 nm transmissionsFiber DistanceSupports networking for distances up to 10 km (6.2 miles)Fiber PortLC-type duplex connectorDDM SupportDigital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltagePower SupplySingle 3.3 volt power supplyOperating TemperatureRated for an operating temperature range of 0 to 70 °C (32 to 158 °F)StandardsCompliant with SFF-8431, SFF-8432, SFF-8472, 10G FC Rev 4.0, FC-PI-4 Rev 7.0, and IEEE802.3ae 10GBASE-LR/LWAndmeedastuskiirus (maksimaalne)10000 Mbit/sLiidese tüüpSFP+Fiiberoptiline pistmikLCVõrgustandardidIEEE 802.3aeSFP-transiiveri tüüpSRKiudjuhtme portide arv1Lainepikkus1310 nmKaabli tüüpÜksikrežiimHot-Plug tugiJahMaksimaalne ülekandekaugus10000 mVõimsustarve (tüüpiline)0,522 WKasutamistemperatuur (T-T)0 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius14,8 mmSügavus56,5 mmKõrgus11,8 mmKaal22 gSertifikaatCE, FCC
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Original part number NP0004 Product name LOGILINK - Patch panel UTP CAT6 24-ports black Producer LogiLink Class of product Complete outlet Type of connector RJ45 Number of ports 24 Wiring type twisted-pair cable Category 6 Usage indoor Additional information metal coverSuitable for mounting in 19 "Standards: CAT 6 8P8C, ROHSCable installation via LSA plugsUp to 250 MHzDimensions: 500x2x1 mm
DC-in jack Yes DHCP client Yes MIB support RFC 1066, RFC 1213, RFC 1157, RFC 1493, RFC 1643, RFC 1757, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2358, RFC 2674, RFC 2819, RFC 2925, RFC 3621, RFC 4022, RFC 4113, RFC 4294, RFC 4293 Operating relative humidity range, % 10 - 90 % Spanning tree protocol Yes Storage temperature range (T-T), °C -40 - 70 °C SSH/SSL support Yes Port mirroring Yes Operating temperature range (T-T), °C 0 - 50 °C Supported data transfer rates 10/100/1000 Mbps Colour of product Black Packet transfer speed 131 Mpps Certification IEC 60950-1, FCC Part 15 (Class A), EN 60950-1, CSA 60950-1, CE EMC (Class A), ANSI/UL 60950-1 SFP slots quantity 28 Power consumption, W 66.9 IGMP snooping Yes Quality of Service (QoS) support Yes Switch layer L2/3 Broadcast storm control Yes SFP+ slots quantity 4 Ethernet LAN (RJ-45) ports quantity 4 Switching capacity, Gbit/s 176 MAC address table, entries 16000 Power over Ethernet (PoE) Support No Switch type Managed Weight, g 4210 Dimensions W x D x H, mm 441 x 270 x 44 Ports quantity 32
TRENDnet’s high efficiency 240 W Single Output Industrial DIN-Rail Power Supply, model TI-S24048 (Mean Well SDR-240-48), supplies up to 240 Watts (48 V, 5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.240 Watt PowerProvides up to 240 Watts (48 V, 5 A) of power for PoE devices such as switches, network cameras, and access pointsActive PFCThe built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive powerOverload ProtectionOverload/short circuit/over voltage/over temperature protectionFull Load TestThis power supply undergoes a 100 % full load burn-in testPassive CoolingCooling by free air convectionDIN-Rail MountMetal enclosure with integrated DIN-rail mountExtreme TemperaturesRated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)Safety CertificationsCertified for UL 508 and TUV EN60950-1Electro Magnetic Emission/ImmunityCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approvedVibration ResistantRated for vibrationLED IndicatorLED indicator confirms power to the unitKoguvõimsus240 WAC-sisendpinge100 - 240AC-sisendsagedus50 - 60Sisendvool1.8Toite kaitsefunktsioonidÜlepinge, Ülekoormus, LühisOtstarveVõrgulülitiKeskmine tõrkeintervall (MTBF)1693000 hToote värvMetallikLED-indikaatoridJahKasutamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius40 mmSügavus125 mmKõrgus114 mmKaal1,03 kgSertifikaatCE, UL, TUV
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
Câble de brassage à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, TPEConnecteur intégré sans accroc pour la protection du verrouPlaqué ou broches pour une meilleure conductivité et l'élimination de la perte de signalGarantie de 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le TPE utilisé comme matériau pour la gaine offre une flexibilité accrue et facilite la manipulation des câbles.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
