Huawei Wifi Mesh 3 ruuteritega katad kuni 400 ruutmeetrise ala traadita internetiga ja edastuskiirusega kuni 3000 Mbps! Sa ei usu seda enne kui ei proovi!
Dual-Radio Performance Gigabit Speeds The UniFi AC Pro AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. Sleek Ultra-Compact Design The UniFi AC Pro AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP. Scalable Enterprise Wi-Fi Management The UniFi Controller v4 software is a powerful enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
Wireless Router|Available bandwidth 2533 Mbps|IEEE 802.11a/b/g|IEEE 802.11n|IEEE 802.11ac|USB 2.0|USB 3.0|1 WAN|4x10/100/1000M|Antenna Type Omni-Directional|Wireless Frequency Range 2.4 - 5 GHz|Included Accessories Antenna x 4,AC Power Adapter,RJ-45 LAN Cable,Quick Installation Guide|Dimensions 77 x 280 x 169mm Shipping box quantity 4 Unit Brutto Volume 0,009504 cubm Unit Gross Weight 1,65 kg
Outdoor 5G device with built-in eSIM support, powerful directional antennas, and a cutting-edge Release 16 modem – ideal for rural, urban, and IoT deployments. With Gigabit Ethernet, PoE-in, and instant MikroTik connectivity out of the box, it’s the smart, rugged choice for fast and flexible internet anywhere. IP66 certified. MikroTik Connectivity solves both issues! Log in to your MikroTik account, choose a data plan, and you’re online. This pre-activated, self-sufficient eSIM setup bridges the gap between “just installed” and “fully operational.” Ideal for remote locations, failover setups, or any place you need reliable internet right now — without any extra steps. With a powerful 16 dBi directional antenna, 4x4 MIMO support, 512 MB of RAM, a modern dual-core ARM CPU, and a wide range of supported bands, ATL 5G is built to perform — whether you’re deep in the countryside or surrounded by signal noise in the city. And with Gigabit Ethernet and PoE-in support, installation is cleaner and simpler — just a single cable for both power and data. ATL 5G features 4 high-gain middle-band antennas and 4 low-band antennas, including full Band 28 support for both LTE and 5G. That means exceptional coverage in all the frequencies that really matter, including from 700 MHz to 1 GHz — the sweet spot for rural reach and wall- penetrating reliability. These low-frequency bands are some of the most widely used by mobile operators around the world, and ATL 5G is ready to squeeze every last drop of performance from them — ensuring you stay connected where others struggle to get a bar. And when you don’t want to rely on a traditional SIM card, you can use the MikroTik eSIM as your main data plan for low-usage setups or IoT deployments like KNOTs. Or simply switch profiles and connect to your favorite mobile operator — flexibility is built in. At first glance, ATL 5G looks like a spaceship — but there’s a good reason for that. This sleek form factor prevents snow and water from collecting and freezing up, making it ideal for installations in cold, wet, or windy environments. No need to climb back up and clean the antenna after every snowstorm. The IP66-rated enclosure is fully sealed against dust and powerful water jets, so ATL 5G can handle some of the roughest weather conditions — whether it’s mounted on a snowy rooftop in the city or standing alone in the open countryside. Send purchase questions
The Ubiquiti UCG-Max is designed to provide a robust networking solution with versatile functionality. It operates effectively across a range of temperatures from -10°C to 40°C, ensuring adaptability in diverse environments. The system supports a variety of data link protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, and 2.5 Gigabit Ethernet, making it suitable for multiple applications.Equipped with a powerful Quad Core ARM Processor running at 1.5 GHz and 3 GB of DDR4 SDRAM, the UCG-Max can handle high traffic with an impressive IDS/IPS throughput of 1 Gbps. The device also emphasizes security and efficiency with cloud management capabilities, a DHCP server, and multiple VPN options such as OpenVPN and L2TP VPN client. With its sleek desktop form factor and various connectivity technologies, this gateway caters to both wired and wireless networking needs, ensuring seamless and secure Internet access.
Travel-Sized Design – Conveniently small and light to pack and take on the road, creating Wi-Fi network via Ethernet, 3G/4G USB modem or WISPDual Band AC750 Wi-Fi – Strong, fast connection for HD streaming on all your devicesOne Switch for Multiple Modes – Perfect for Wi-Fi at home, your hotel room or on the roadFlexible Power – Micro USB port to an adapter, portable charger or laptopVersatile USB – For file sharing or internet access from a 3G/4G USB modem
The Ubiquiti UniFi U7 Pro Wall redefines the standard for wireless network performance and security. Designed to cater to the demands of high-density environments, it supports over 300 connected devices and delivers extensive Wi-Fi coverage across up to 140 sq.m. With the integration of Wi-Fi 6E technology, users can experience speeds up to 5.7 Gbps, ensuring smooth streaming, gaming, and downloading across all connected devices.Security is a priority, and the U7 Pro Wall addresses this with advanced encryption protocols including WPA3, alongside features like Guest Isolation and Private Pre-Shared Key (PPSK), safeguarding your network against unauthorized access. Its wall-mountable design, powered by PoE+, offers a sleek, space-saving solution that is easy to install and manage, making it an ideal choice for businesses, educational institutions, and large residential spaces seeking a reliable, high-performance wireless access point.
The Ubiquiti UniFi U7 Lite is a wireless access point designed for seamless connectivity in various environments. With a data transfer rate of 4.3 Gbps and support for both 2.4 GHz and 5 GHz Wi-Fi bands, it provides performance for over 200 connected devices, ensuring users experience reliable and high-speed Internet. The device is wall or ceiling-mountable, making it a versatile choice suitable for both residential and commercial spaces.Equipped with features such as 2x2 MU-MIMO technology and fast roaming, the U7 Lite enhances network efficiency and user experience. It incorporates security measures like TLS encryption and various authentication methods, including RADIUS and RADSEC, to protect user data. With its durable design, operating temperature range from -30°C to 40°C, and humidity tolerance, this device is built to function in diverse conditions.
ALFA AWUS036ACHM is a long range dual band USB WiFi adapter compatible with Microsoft Windows PCs. It features an RP-SMA antenna port and a 5 dBi dual-band antenna. The antenna is detachable and can be upgraded. It also has a power amplifier that increases it's reception range compared to ALFA's single antenna 802.11n products.This is capable of receiving and transmitting on both the 2.4 GHz and 5 Ghz bands. With 802.11ac standard routers AWUS036ACHM can achieve throughput speeds up to 433 Mbps. This adapter is backward compatible with 802.11n WiFi routers but will have limited speed with those networks. An 802.11ac router is required for the maximum throughput.
802.11ac Dual-Band Wireless-AC1200 Router, Ports: RJ45 for 10/100/1000 BaseT for WAN x 1, RJ45 for 10/100/1000 BaseT for LAN x 4, USB 2.0 x 1, External antenna x 4
SXT LTE6 kit is an update of our timeless device for remote locations that are within cellular network coverage. It features the same modern Category 6 LTE chip that you might have seen in our latest devices – like the popular Chateau LTE6 ax! Not only this LTE chip can provide reliable Internet connectivity for your building even where cell phones fail, it also allowed us to drive the price for this kit way down. Mount an SXT outside your home – and always stay connected! You’re getting the classic, fundamental design that has stood the test of time. Weatherproof. Unobtrusive. Snow-resistant. With a modern LTE6 card for uninterrupted mobile connectivity. And a price around 30% lower than the original SXT LTE6 kit. Furthermore, we offer significant project discounts and custom branding options on volume orders. The best price on the market becomes even better! We’ve included two Micro-SIM slots – for backup. It never hurts to have extra options when it comes to mobile network coverage. Also, the Category 6 LTE modem enables carrier aggregation, allowing SXT to use multiple LTE bands simultaneously. That’s a huge advantage when there are a lot of mobile users in the area. It offers better responsiveness in a crowded environment. And higher efficiency for weaker signal situations in the countryside. Win-win! We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions. The unit is equipped with two Ethernet ports and PoE functionality: PoE-in on Ether1, PoE-out on Ether2. That means SXT can power other devices or be powered by other devices, making your cable management so much easier!
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
AX300 Nano Wi-Fi 6 Wireless USB Adapter Lightning Speed, Solid Connections - Leveraging Wi-Fi 6 technology, achieve blazing-fast speeds up to 287 Mbps for flawless web browsing, instant email responses, and seamless social media sharing.* Compact and Portable – Nano-sized (0.69×0.62×0.28 in) for lightning-fast wireless — perfect for travel and remote work. Easy to Setup – Comes preloaded with an internal driver for instant connectivity, eliminating tedious processes and allowing for a simple plug-and-perform experience without any hitches. Smoother Online Experience - Works with MU-MIMO routers, which provide simultaneous data streams, boosting throughput and efficiency. Seamless Wi-Fi Hotspot Sharing - Leverage AP Mode to transform your device into a robust Wi-Fi hotspot, conveniently providing fast internet access to numerous connections. Wide Compatibility - Supported operating systems include Windows (11/10/7) and Linux (Kemel 3.10 and later)
Mikrotik Chateau LTE7 (5HACD2HNDTC&R11E-LTE7) | Dual-band (2.4 GHz / 5 GHz) | Wi-Fi 5 (802.11ac) | WLAN data transfer rate (max) 1167 Mbit/s | Ethernet WAN Yes | SIM card slot Yes | 3G/4G USB modem compatibility Yes | Ethernet LAN Yes | Ethernet LAN interface type Gigabit Ethernet | Mobile network generation 4G | 1xEthernet LAN (RJ-45) ports | USB port Yes | Antenna design Internal | Power source type DC | Operating temperature (T-T) -40 - 70 C
Boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly Compatible with 802.11 b/g/n and 802.11ac WiFi devices Dual band speeds up to 750Mbps Miniature size and wall-mounted design make it easy to deploy and move flexibly Ethernet port allows the Extender to function as a wireless adapter to connect wired devices
MikroTik RouterBOARD RB5009UPr+S+IN No Wi-Fi, Router Switch, Rack Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 7, Mesh Support No, MU-MiMO No, No mobile broadband, SFP+ ports quantity 1
Elame ajal, mil Internetil on meie elus suur roll mängida. Paraku ei ole WiFi signaal alati kõige stabiilsem ning ei pruugi ühtlaselt levida meie kodude või kontorite kõikidesse nurkadesse. Siin tuleb appi Deco M5 mesh ruuteri süsteem, mis võimaldab seadmed paigutada hoone erinevatesse kohtadesse, kuid nautida ühte ja stabiilset WiFi võrku kogu elamis- või äripinnal. Deco M5 ruuterid sobivad hoonesse, mille suurus on kuni 510 ruutmeetrit. Suuremate pindade katmiseks on võimalik juurde soetada rohkem ruutereid ning neid olemasolevatega ühendada. Deco M5 loob kiire ja stabiilse ühenduse kombineeritult kuni 1267 Mbps (400 Mbps 2.4 Ghz + 867 Mbps 5 Ghz) ning töötab enamike modemite ja teenuspakkujatega (ISP). Deco suudab sujuvalt pakkuda ühendust kuni 100 seadmele. Ruuterisüsteemi ühendamine on imelihtne ning Deco enda rakendus aitab Sind igal sammul. Samuti saad Deco M5 juhtida Amazon Alexa abil. Komplektis on 2 ruuterit!
A New Generation IEEE 802.3bt PoE++ Managed Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-8HP2S is a cost-optimized, 1U, Gigabit IEEE 802.3bt PoE++ Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 2 10/100/1000BASE-T ports featuring 95-watt 802.3bt PoE++, 6 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 2 100/1000BASE-X SFP ports. With a total power budget of up to 240 watts for different kinds of PoE applications, the GS-4210-8HP2S provides a quick, safe and cost-effective 802.3bt PoE++ network solution for small businesses and enterprises. IEEE 802.3bt PoE++ Solutions The GS-4210-8HP2S supports the 802.3bt standard, supplying up to 95 watts per 802.3bt port for increased requirements of devices. It can offer more PoE applications, such as: PoE PTZ speed dome cameras Any network device that needs higher PoE power to work normally Thin-client AIO (All-in-One) touch PC Remote digital signage display Built-in Unique PoE Functions for Powered Devices Management Being the managed PoE switches for surveillance, wireless and VoIP networks, the GS-4210-8HP2S features the following special PoE management functions: PD alive check Scheduled power recycling PoE schedule PoE usage monitoring PoE extension Intelligent Powered Device Alive Check The GS-4210-8HP2S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-8HP2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. Scheduled Power Recycling The GS-4210-8HP2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-8HP2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours. PoE Usage Monitoring Via the power usage chart in the web management interface, the GS-4210-8HP2S enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. PoE Power and Ethernet Data Transmission Distance Extension In the “Extend” operation mode, the GS-4210-8HP2S operates on a per-port basis at 10Mbps duplex operation but can support 23- or 85-watt PoE power output correspondingly over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GS-4210-8HP2S provides an additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Environment-friendly, Smart Fan Design for Silent Operation The GS-4210-8HP2S features a desktop-size metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-8HP2S is able to operate reliably, stably and quietly in any environment without affecting its performance. Cybersecurity Network Solution to Minimize Security Risks The cybersecurity feature that virtually needs no effort and cost to have includes the protection of the switch management and the enhanced security of the mission-critical network. Both SSHv2 and TLS protocols are utilized to provide strong protection against advanced threats. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-8HP2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-8HP2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-8HP2S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-8HP2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-8HP2S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Advanced Network Security The GS-4210-8HP2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. User-friendly and Secure Management For efficient management, the GS-4210-8HP2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-8HP2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-8HP2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the GS-4210-8HP2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The GS-4210-8HP2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage. 90W 802.3bt PoE++ and 30W 802.3at PoE+ Hybrid PoE Networking Solution PLANET GS-4210-8HP2S can easily build an 802.3bt PoE++ networking solution on the cyber security system for the enterprises. For instance, it can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GS-4210-8HP2S and 802.3bt PoE++ Splitter - POE-173S, operate as a pair to provide the easiest way to power your non-PoE devices such as laptops, thin client, POS system, PTZ (pan, tilt & zoom) IP cameras and other network devices at distance up to 100 meters. Multiple Spanning Tree Protocol with PoE IP Office Solution for SMBs and Workgroups The GS-4210-8HP2S features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Multiple Spanning Tree Protocol (802.1s MSTP) into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3af/at/bt standard, the GS-4210-8HP2S can directly connect with any IEEE 802.3at/bt end nodes like speed dome cameras. The GS-4210-8HP2S can easily help enterprises with the available network infrastructure to build wireless AP, IP camera and VoIP systems where power can be centrally controlled.
See Delocki USB-laadimiskaabel paistab silma magnettehnoloogia poolest ja võimaldab seadme ja toiteallika vahel hõlpsasti ja kiiresti ühendada ja lahti ühendada. Kasutades ühte kolmest kaasasolevast magnetadapterist, saab erinevaid mobiilseadmeid, tahvelarvuteid jne laadida kas 8-poolse, Micro USB-B või USB Type-C™-liidese kaudu. Adapterid on mõeldud nii, et need jäävad seadme pordi sisse. Nii saab vältida liidese riknemist ja toimida ka tolmukaitsena. USB-laadimiskaabel saab oma ümmarguse magnetilise pistiku abil kohe seadmega ühendada. Kaabel on tänu tugevale tekstiilist varjestusele ja metallist korpusele mõlemas kaabli otsas väga tugev ja vastupidav. Spetsifikatsioon - Ühendused: Kaabel: USB 2.0 Type-A isane > magnetiline pistik: USB 2.0 Type-A isane > magnetiline pistik Adapterid: magnetliides > 8-poolne Lightning™-istmik > 8-poolne Lightning™-istmik magnetliides > USB Type Micro-B pesa magnetliides > USB Type-C™ pesa - Toetab ainult laadimisfunktsiooni - Maksimaalne väljundvool: 2,4 A - Pinge: 5 V - Roheline LED-indikaator laadimise ajal - Kaabli gabariit: 24 AWG toitejuhe - Vaskjuht - Tekstiilvarjestusega kaabel - Metallist korpusega pistikupesa - Värv: antratsiit - Pikkus koos pistikutega (L): ca. 1 m Süsteeminõuded - Toiteallikas, millel on vaba USB Type-A emasport Pakendi sisu - Magnetiline USB-laadimiskaabel - 3 x magnetilised adapterid
