• 28AWG • PIMF (Pairs In Metal Foil) • Shielded Connector • Gold Plated Connectors for high signal quality • Molded boot with Strain relief • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • RoHS compliantLow Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173 • Bulk pack without zipper bag per piece • Quicker and easier to install • Selling Unit: 34pcs/set
The DIGITUS Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot, which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.
The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. They will guarantee the installed cabling system is compliant with the ISO and EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking.
Vastupidav kaabel internetiühenduste jaoks Ubiquiti poolt pakutavad UniFi Ethernet Patch kaablid on suure jõudlusega võrgukaablid mis on mõeldud usaldusväärse ja kiire ühenduse loomiseks paljudele Ubiquiti UniFi seadmetele ja teistele võrguseadmetele. Need kaablid on spetsiaalselt loodud nii äri- kui ka koduvõrgukeskkondade rangete nõudmiste täitmiseks. Kvaliteetsetest materjalidest valmistatud kaablid on kategooria 6 (Cat6) spetsifikatsioonidega mis toetavad andmeedastuskiirust kuni 1 Gbps (gigabit sekundis) ja ribalaiust kuni 250 MHz. See muudab selle sobivaks selliste rakenduste jaoks nagu kiire andmeedastus voogedastus ja võrgumängud kus suur ribalaius ja madalam latentsus on üliolulised. UniFi Ethernet Patch-kaablid on saadaval 0 1 0 3 1 2 3 5 või 8 meetri pikkuses ning on saadaval elegantsetes mustades sinistes ja valgetes värvivariatsioonides. Mõlemas otsas on RJ45-liitmikud mille ülimalt õhuke välisläbimõõt on 3 mm ja mis ühilduvad universaalselt enamiku võrguseadmetes leiduvate Ethernet-portidega. Lisaks on UniFi Ethernet Patch kaablid disainitud vastupidava PVC (polüvinüülkloriid) ümbrisega mis suurendab kaabli pikaealisust ja vastupidavust erinevatele keskkonnateguritele nagu temperatuurivahetused ja niiskus. Kaabel on ka paindlik mis hõlbustab lihtsat paigaldamist ja marsruutimist kitsastes kohtades ilma kaabli kahjustamise ohuta. Kokkuvõttes on UniFi Ethernet Patch Cable ideaalne lahendus Ubiquiti ökosüsteemi ja muude võrkude jaoks pakkudes nii vastupidavust kui ka suurt jõudlust et säilitada stabiilne ja tõhus võrguühendus. Ühenduskaablid vastavad telekommunikatsioonitoodete ja -teenuste kommertshoonete kaablite tehnilisele standardile TIA-568 ja läbisid Fluke Networks'i poolt läbiviidud TIA-568-B.2 Cat6 kanali testi.
The 50-metre unshielded LAN cable 96092 from goobay is suitable for installation in small office and home office environments (SOHO applications). The unassembled, flexible data, installation and laying cable is suitable for assembly with a maximum transmission length of 90 metres indoors. The high-quality copper conductor ensures an excellent, high-performance network connection, while the robust, halogen-free cable sheath protects the Ethernet cable in the event of fire and enables a long service life. The patch cable complies with the Construction Products Regulation (CPR) and Eca fire protection class.TypeCableColourblueEAN4040849960925Manufacturer no.96092Made inChinaApplication exampleFor installation in the wall, for socket/panelAreaNetworkConnection1x cable end without plugConnection1x cable end without plugCable cross-section23 AWGCable categoryCat.6aShieldingU/UTPPropertiesexternalFeatureUsable up to a cable length of 90 metres, characteristic impedance 100 Ω, max. bandwidth 500 MHzFurther informationCable sheath diameter approx. 6mm, copper conductor (CU), AWG 23/1 (solid), halogen-free cable sheath (LSZH)Cable length50 metres
The Ethernet cable USB-A 3.2 Gen1 to RJ-45 from goobay is a technology upgrade for maximum convenience. The innovative adapter cable 74163 is the compact Ethernet solution for all USB-A devices without their own RJ-45 port. The smart chip built into the USB connector replaces the previously required, cumbersome RJ-45 to USB-A adapter. Ethernet is therefore immediately available without any additional drivers. The LAN cable enables a stable, wired Internet connection to USB-A devices without their own network cable connection. With Cat.6, the cable achieves a transfer rate of up to 1 Gbit/s and is effectively protected against interference thanks to foil shielding (FTP). The braided, hard-wearing textile jacket of the USB cable is made of cotton, has a pleasant feel and is gentle on sensitive surfaces. The high-quality, robust aluminum plugs with kink protection ensure longevity. The USB-A port is compatible with notebooks and tablets from popular manufacturers such as Lenovo, HP or Dell as well as with Windows, macOS and Android and is backwards compatible with USB 2.0. type LAN adapter color white EAN 4040849741630 Manufacturer No. 74163 Made in Taiwan Application example Connects router or network switch to USB-C port of laptop network area connection of 1x USB-A (male) Cat.6 connector Protocol USB 3.2 Gen 1 (5 Gbit/s) taps 2 Category Cable Cat.6 FTP shielding Properties external, sleeved Feature Braided, durable textile jacket made of cotton, high-quality, robust metal plugs with kink protection, nickel-plated contacts Further information Max. transfer rate 1 Gbit/s, cable sheath diameter approx. 6mm, shielding foil (aluminum) Note The Internet cable is not suitable as a rollover cable for game consoles cable length 10 meters
Hama Cat 6A võrgukaabel pakub ülikiiret andmeedastust kiirusega kuni 10 Gbit/s. Kaabel on S/FTP varjestatud, mis tagab usaldusväärse ja stabiilse ühenduse ka kõige nõudlikumates võrgukeskkondades. See kaabel on ideaalne valik kiire ja turvalise võrguühenduse loomiseks. • Cat 6A standard, kiirus kuni 10 Gbit/s • S/FTP varjestus maksimaalse häirekaitse jaoks • Usaldusväärne ja stabiilne võrguühendus • Kvaliteetne ja vastupidav disain
Das Digitus Professional Cat.7 S/FTP Verlegekabel DK-1743-VH-250 zeichnet sich durch einen 4x2x AWG23/1 Kabelaufbau aus und erreicht eine Übertragungsfrequenz von bis zu 1.200 MHz. Der Kabelmantel ist halogenfrei und konform zu der Norm IEC 60332-3-24, FRNC-C, LSZH-3 und der BauPVO Euroklasse Dca. Das Kabel ist für die strukturierte Gebäudeverkabelung im sekundären und tertiären Bereich geeignet. Außerdem verfügt es über hervorragende mechanische Eigenschaften, es bietet eine Zugbelastung von max. 150N, der dynamische Biegeradius beträgt min. 8x AD mm, der statische Biegeradius min. 4x AD mm.
Das Patchkabel U-Cable-Patch-3M-RJ45-BL von Ubiquiti ist ein Cat.6 LAN-/ Netzwerkkabel mit zwei flexiblen RJ-45 Steckern zum Anschluss von Netzwerkkomponenten im Innenbereich. Es ist ultradünn, mit biegsamen Knickschutztüllen für eine flexible Installation.
• 28AWG • PIMF (Pairs In Metal Foil) • Shielded Connector • Gold Plated Connectors for high signal quality • Molded boot with Strain relief • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173 • Bulk pack without zipper bag per piece • Quicker and easier to install • Selling Unit: 30pcs/set