Võrguseadmed

Designed to fit a low profile PCI slot Supports 32-Bit PCI Local Bus Master high-speed operation (Rev. 2.3 specification) 1 x 10/100/1000Mbps Auto Negotiation and Auto-MDIX Port Built-in FIFO (8K/64K) buffers reduce overhead memory transfers Full-Duplex mode doubles network data rates up to 2000Mbps Supports IEEE 802.1Q VLAN Tagging (Windows 2000 and above only) Supports Wake-on-LAN for Remote Wake Up Supports Windows 7 (64/32bit)/Vista (64/32bit)/XP, and Linux operating systems Plug and Play

Features and Benefits   IEEE 802.3af compliant, splits power and data from PoE equipment Supports output power up to 12.95 W at 24 VDC Short circuit protection for power output Auto disconnection if power input voltage is too high -40 to 75°C operating temperature range (T model) DIN-Rail mounting ability   Introduction With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits power from PoEto Ethernet devices. In this case, both power and data can be transmitted up to 328 feet (100 m) from power source equipment (PSE). This product can operate from 0 to 60°C or -40 to 75°C for T model, and the rugged hardware design makes SPL-24 perfect for ensuring your PoE Ethernet equipment can meet demanding industrial applications.

Features and Benefits   IEEE 802.3af compliant, splits power and data from PoE equipment Supports output power up to 12.95 W at 24 VDC Short circuit protection for power output Auto disconnection if power input voltage is too high -40 to 75°C operating temperature range (T model) DIN-Rail mounting ability   Introduction With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits power from PoEto Ethernet devices. In this case, both power and data can be transmitted up to 328 feet (100 m) from power source equipment (PSE). This product can operate from 0 to 60°C or -40 to 75°C for T model, and the rugged hardware design makes SPL-24 perfect for ensuring your PoE Ethernet equipment can meet demanding industrial applications.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Cisco Catalyst 2960 Series Switches with LAN Base software are a family of fixed-configuration, standalone intelligent Ethernet devices that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, midmarket, and branch office networks. The Cisco Catalyst 2960 LAN Base Series offers integrated security, including Network Admission Control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Modular DesignFlexible 1 to 1 Sparing Options2-Slot1U Rack Mount Chassis

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

1 x 1000Base-SX / LX Mini-GBIC slot PCI Express 1.0a compliant Incorporates Advanced Configuration Power Management Interface (ACPI) 2.0 TCP segmentation / large send offload IEEE 802.1Q VLAN tagging and IEEE 802.1p Layer 2 priority tagging IEEE 802.3x full-duplex Flow Control Microsoft NDIS5 (IP, TCP, UDP) checksum offload SNMP v1 supported Preboot Execution Environment (PXE) 2.1 Jumbo Frames up to 7 KBytes Intuitive cable diagnostic utility 3-year limited warranty

ACC Patch cable FTP CAT 5e, RJ45, RJ45, 3 m, Grey Other - foil screened twisted pair cable - pair-sequence acc. to EIA/TIA 568 - molded version with strain relief - with length indication on the strain relief - with gold plated contacts - slim line strain relief, suitable for all patch panel Type CAT 5e Network cable F/UTP; 2xRJ45 plug ; foil shielded AWG 26/7 Colour gray Cable length 3m Package poly bag Connectors RJ45

ACC Pach cable FTP CAT 5e, RJ45, RJ45, 1 m, Grey Other - foil screened twisted pair cable - pair-sequence acc. to EIA/TIA 568 - molded version with strain relief - with length indication on the strain relief - with gold plated contacts - slim line strain relief, suitable for all patch panel Type CAT 5e Network cable F/UTP; 2xRJ45 plug ; foil shielded AWG 26/7 Colour gray Cable length 1m Package poly bag Connectors RJ45

8 10/100/1000Base-T PoE ports, Smart Gigabit Ethernet switch, 802.3x Flow Control, StaticTrunk, PortMirroring, IGMP Snooping, 802.1Q VLAN up to 32, VID range 1~4094, LoopBack detection, QoS, Bandwidth Control, Static MAC, Broadcast/Multicast storm control, 802.3af PoE Budget 64W, WebUI control, Smart Console Utility

Wireless AC Dual Band USB Adapter, Compatible with 802.11a/b/g/n and 802.11ac (draft), switchable Dual band 2.4 GHz or 5 GHz. Up to 433 Mbps data transfer rate in 802.11ac mode (5 GHz), up to 150 Mbps data transfer rate in 802.11n mode (2.4 GHz). High speed USB 2.0 interface, Integrated antenna. Ad-hoc and Infrastructure operation modes. WEP, WPA, WPA2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily, FLASH like formfactor, w/o usb cradle

WENTRONIC 68908 UTP 10/100 pordi jagaja: 2 x CAT5 Ethernet

The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM - 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.

Addressing the Under-servedairFiber core networks backbones can be instantly and cost-effectively deployed anywhere, bringing Internet deep into the unserved areas of the world.Plug and Play DeploymentUtilizing the worldwide license-free 24GHz band, airFiber can be freely purchased and deployed nearly anywhere. Additionally, the product was designed to be instantly setup and configured.Revolutionary PerformanceWith true 1.4Gbps+ data throughput and up to 13 km range, airFiber provides a breakthrough in 24GHz backhaul performanceHybrid Division Duplex (HDD)HDD provides the best of both worlds — latency performance of Frequency Division Duplex (FDD) with the spectral efficiency of Time Division Duplex (TDD).Price per 1 pcs (not set).

Radome Cover 0.9M parabolic/dish for Ubiquiti RocketDish RD-5G34

5GHz, 38", 34.2dBi dual pol. antenna, need Rocket M5.Carrier Class Performance. Breakthrough Price Points. Instantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications. Rocket mount and weatherproof RF jumpers included.Rocket M Seamlessly Integrates with Rocket Dish Antenna. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

Hi-gain 16dBi 2X2 MIMO performance for long distance 900MHz applications. Designed to be seamlessly paired with Rocket M900 hardware.Set contains 2pcs Yagi antennas.

3GHz, AirOS, POE-RJ-45 Connector, Standard 802.11n.The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP AirMax base-station applications.Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

The RB400L is low cost series. The RB411L has one miniPCI slot and one Ethernet port. Use this device in an outdoor case for a CPE device, or a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. It’s powered by an Atheros 300MHz CPU and has 32MB of RAM and a Level3 RouterOS license. Differences between RB411 and RB411L can be seen in the file "RB400L differences" which you can download in the left side menu.

RouterBOARD 411 with 300MHz Atheros CPU, 32MB RAM, 1 LAN, 1 MiniPCI, 1 MiniPCIe, 1 USB slot, RouterOS L4.The RB411U is a versatile yet very small device. It includes all - a miniPCI slot, a USB 2.0 port and a miniPCI-E slot for connecting a 3G card. A SIM card slot for 3G is also present on the RB411U.RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time.One small device - with all the power of RouterOS. At a very special price.  SpecificationsCPU Atheros AR7130 300MHz embedded processorMemory 32MB SDRAM onboard memory chipBoot loader RouterBOOTData storage 64MB onboard NAND memory chipEthernet ports One 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/XMiniPCI slot One MiniPCI Type IIIA/IIIB slotOne MiniPCIe slot for 3G modem (onboard SIM connector)Wireless not built in, possible by adding a miniPCI cardExpansion USB 2.0 with 5V 1A supplyExtras Reset switch, Beeper, Input voltage monitorSerial port One DB9 RS232C asynchronous serial portLEDs Power, NAND activity, 5 user LEDsPower options Power over Ethernet: 10..28V DC (except power over datalines).Power jack: 10..28V DCPower Consumption 3-12WTemperature Operational: -20°C to +70°C (-4°F to 158°F)Humidity Operational: 70% relative humidity (non-condensing)Currently supported OS RouterOS 3.x, Level4 license included

The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.

The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 100pcs.

High quality pigtail MMCX to MMCX male, RF174 cable, gilded connectors, length 25 cm

High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.

CA411-711 is new indoor case for RB411 and RB711 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mounting holes on the back.

RB433, RB433AH and RB433UAH Indoor case (3 holes for Nfemale Bulkhead connectors or AC/SWI Swivel antennas and hole for USB).

Temflex 1500 Elektriteip Temflex 1500 on soodne T3-klassi universaalne teip elektrijuhtmete isoleerimiseks ja eristamiseks. Omadused: Soodne Hea painduvus Piisavad elektrilised omadused Lai värvivalik VDE ja IEC 60454 3 1 5/F PVCP/90 - standardite heaksiit Tehnilised andmed (IEC 60454-2): Paksus: 0,15 mm Materjal: PVC Murdumistugevus: 20 N/10 mm Kleepuvus: 2,4 N/10 mm, teras Max temperatuur: 90°C Tulekindlus: isesumbuv Läbilöögipinge: 40 kV/mm Sertifikaadid: IEC 60454 3 1 5/F PVCP/90 ja VDE

Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.

Scotch Super 33+ on T1-klassi elektriteip. Mõeldud juhtmete ja kaablite elektriühenduste isoleerimiseks kuni 600V ja max 105°C.  Omadused: • Väga hea mehaaniline vastupidavus, samuti niiskusele, kemikaalidele. UV-kindel. • Väga head elektrilised omadused Tehnilised andmed: (ASTM D1000): • Värv: must • Materjal: PVC • Paksus: 0,18 mm • Murdumiskindlus: 250 % 22 °C, 100 % -18°C • Kleepuvus: 794 g/25 mm, teras • Temperatuurivahemik:    • Paigaldamine: min -18°C (CSA)    • Pidevalt: max105°C (CSA), 80°C (UL510) • Tulekindlus: isesumbuv (UL510) • Läbilöögipinge: 8750 V • Sertifikaadid: UL 510, CSA, FI Paigaldamine. Scotch Super 33+ paigaldatakse samamoodi kui vinüülteipe üldiselt. Mähkige vähemalt kaks kihti 50% kattuvusega.  Venitage veidi teipi enne mähkimist, et teip jääks tihedalt vastu isoleeritavat pinda. Viimast kihti mitte venitada, see väldib teibi lahtikerimist. Valige sobiv teibi tüüp vastavalt ümbritsevale temperatuurile. Tavatingimustes võib kasutada ka odavamat T2 klassi elektriteipi Scotch 710 või T3 klassi Temflex 1500. Raskemates tingimustes kasutage paksemat Scotch Super 88 elektriteipi.