Võrguseadmed

Huawei WiFi Mesh 3 (White), WS8100-22

Powerful Layer 3 Routing Solution for All Long-Reach Networks PLANET SGS-6341-16S8C4XR is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First) with 10Gbps uplink and multiple SFP fiber interfaces delivered in a rugged, strong case. The administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the 10G network efficiently. Besides, with 128Gbps switching fabric, the SGS-6341-16S8C4XR can handle extremely large amounts of data in a secure topology linking to backbone or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast applications. High Performance 10Gbps Ethernet Capacity The four SFP+ slots built in the SGS-6341 series supports Dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces the SGS-6341 series boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.   AC and DC Redundant Power to Ensure Continuous Operation The SGS-6341-16S8C4XR is equipped with one 100~240V AC power supply unit and one additional 36-75V DC power supply unit for redundant power supply. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity.    Central IP Stacking Management The SGS-6341 series supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network. High Reliability Hardware Stacking Two of the 10G SFP+ ports are used  to connect several SGS-6341 series  build a virtually logical facility. The SGS-6341 series to gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The SGS-6341 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.     Redundant Ring, Fast Recovery for Critical Network Applications The SGS-6341 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple Ring network, the recovery time could be less than 50ms to quickly bring the network back to normal operation.   Layer 3 Routing Support The SGS-6341 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.   Strong Multicast  The SGS-6341 series supports abundant multicast features. In Layer 2, it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. In Layer 3 multicast protocols, it features IGMPv1/v2/v3 and DVMRP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions which make the SGS-6341 series great for any robust networking.   Full IPv6 Support The SGS-6341 series provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.   Robust Layer 2 Features The SGS-6341 series can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341 series allows the operation of a high-speed trunk combined with multiple ports.  It enables up to 128 groups for trunking with a maximum of 8 ports for each group.  Excellent Layer 2 to Layer 4 Traffic Control The SGS-6341 series is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission.    Powerful Security The SGS-6341 series supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341 series also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.   Efficient and Secure Management For efficient management, the SGS-6341 Managed Gigabit Switch series is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341 series offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341 series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software.  For reducing product learning time, the SGS-6341 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-6341 series offers secure remote management by supporting SSH connection which encrypts the packet content at each session.   Intelligent SFP Diagnosis Mechanism The SGS-6341-16S8C4XR supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. High Availability Mesh Networking Solution for Big Data System By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-16S8C4XR offers up to 128Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SGS-6341-16S8C4XR features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-6341-16S8C4XR is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm. Excellent Solution to Core/Data Center Security and QoS Switch The SGS-6341-16S8C4XR performs 128 Gigabits per second non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341-16S8C4XR provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features. Layer 3 VLAN Routing With the built-in robust Layer 3 traffic routing protocols, the SGS-6341-16S8C4XR ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6341-16S8C4XR is certainly a cost-effective and ideal solution for enterprises. Physical Ports 24 100/1000BASE-X mini-GBIC/SFP slots Eight 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-8 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP RJ45 to DB9 console interface for switch basic management and setup 1 USB2.0 interface for configuration and firmware storage   Stacking Features IP Stacking - Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces - Single IP address management, supporting up to 24 IP units stacked together Hardware Stacking - Virtualized multiple SGS-6341 series switches into one logical device - Connects with stack member via assigned 10G SFP+ interfaces - Single IP address stack management, supporting up to 4 hardware units stacked together - Stacking architecture supports redundancy Ring mode   IP Routing Features IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+ Routing interface provides per VLAN routing mode  VRRPv1/v3 protocol for redundant routing deployment  Supports route redistribution Supports hardware-based wire-speed VLAN routing   Multicast Routing Features Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast) Supports DVMRP (Distance Vector Multicast Routing Protocol) Supports IGMP v1/v2/v3 and MLD v1/v2   Layer 2 Features Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports Auto-MDI/MDI-X detection on each RJ45 port Prevents packet loss flow control - IEEE 802.3x pause frame flow control in full-duplex mode - Back pressure flow control in half-duplex mode High performance Store-and-Forward architecture, broadcast storm control, port loopback detect 16K MAC address table, automatic source address learning and aging Supports VLAN - IEEE 802.1Q tag-based VLAN - GVRP for dynamic VLAN management - Up to 4K VLANs groups, out of 4041 VLAN IDs - Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported - Private VLAN Edge (PVE) supported - GVRP protocol for Management VLAN - Protocol-based VLAN - MAC-based VLAN - IP subnet VLAN Supports Link Aggregation - Maximum 128 trunk groups, up to 8 ports per trunk group - IEEE 802.3ad LACP (Link Aggregation Control Protocol) - Cisco ether-channel (static trunk) Supports Spanning Tree Protocol - STP, IEEE 802.1D (Classic Spanning Tree Protocol) - RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) - MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN) - Supports BPDU & root guard Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many) Provides port mirror (many-to-1) Supports G.8032 ERPS (Ethernet Ring Protection Switching)   Quality of Service 8 priority queues on all switch ports Support for strict priority and WRR (Weighted Round Robin) CoS policies Traffic classification - IEEE 802.1p CoS/ToS - IPv4/IPv6 DSCP - Port-based WRR Strict priority and WRR CoS policies   Multicast Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping Querier mode support Supports Multicast VLAN Register (MVR)   Security IEEE 802.1x port-based network access authentication MAC-based network access authentication  Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6 TACACS+ login users access authentication IP-based Access Control List (ACL) MAC-based Access Control List Supports DHCP snooping Supports ARP inspection IP Source Guard prevents IP spoofing attacks Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding   Management Management IP for IPv4 and IPv6 Switch Management Interface - Console/Telnet Command Line Interface  - Web switch management - SNMP v1, v2c, and v3 switch management - SSH/SSL secure access BOOTP and DHCP for IP address assignment Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6 SNTP (Simple Network Time Protocol) for IPv4 and IPv6 User privilege levels control Syslog server for IPv4 and IPv6 Supports DDM Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events) Supports sFlow Supports ULDP Supports ULPP (Uplink Protection Protocol) Supports ULSM (Uplink State Monitor protocol) Supports LLDP/LLDP MED Supports DHCP Option82, Option37/38 Supports ping, trace route function for IPv4 and IPv6

Highly Convenient and Robust Industrial PoE++ Splitter  To fulfill the growing outdoor PoE applications, PLANET IPOE-175S is an Industrial-grade, IP67-rated 802.3bt Power over Ethernet Splitter which delivers the Ethernet digital data and PoE power from an 802.3bt PoE++ PSE (power source equipment) over a UTP cable. It enables to deliver of a maximum of 60-watt 12V DC power output to a non-PoE powered Ethernet device. Also, supports passive 10/100/1000Mbps Ethernet connection and distance up to 100 meters. The IPOE-175S is designed to work under the operating temperature range from -40 to 75 degrees C. It's an ideal solution to transfer power to a traditional network device with high power demand directly without the need to install additional power outlets, and electrical cabling in the industrial environment. Quick and Easy 802.3bt PoE++ Network Deployment If the existing network deployment consists of non-PoE powered devices that require high power to function, the IPOE-175S, powered by an 802.3 PoE++ power sourcing equipment, can feed the PDs with 802.3bt PoE++  as the splitter can split the data and power into two streams. The PDs get their power through the splitter’s DC jack and the RJ45 interface accepts only Ethernet data. The following non-PoE PDs can be turned into a PoE++ environment with the IPOE-175S:  PTZ speed dome camera Thin client AIO (All-in-One) touch PC Remote digital signage display Non-PoE network devices that need higher power to work normally Weather-proof RJ45 Ethernet Connector and Shielded Plug The IPOE-175S is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and many more. The IPOE-175S is equipped with 3 waterproof cable glands for direct-attach applications. Assembled with a waterproof cable gland, it can make the general connector weather-proof and provides a tight and strong connection. Moreover, it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.    Environmentally-hardened Design With an industrial-level IP67-rated aluminum case, the IPOE-175S provides a high level of immunity against electromagnetic interference, and can protect itself from dust and water ingress, and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment.  Robust Protections The IPOE-175S provides ±8KV DC for Ethernet ESD protection and ±6KV surge immunity to improve product stability and protects users' networks, making sure the flow of operation does not fluctuate.   Making Network Easier and More Reliable The space-saving industrial 802.3bt PoE++ splitter IPOE-175S can be placed in almost any difficult environment. It allows either DIN-rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-175S is the ideal product for co-working with an industrial 802.3bt PoE++ type-4 injector that can feed the power to non-PoE devices up to 100 meters (328 feet) away in those harsh environments. 802.3bt PoE++ Switch and Splitter Installation For a place which is hard to find the power inlet, the IPOE-175S separates digital data and power into outputs (12V DC) to non-PoE devices such as laptops, PTZ (pan, tilt & zoom) IP cameras, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. IEEE 802.3bt Injector and Splitter Installation For a place which is hard to find the power inlet, the IPOE-175 and IPOE-175S can operate as a pair to provide the easiest way to power the above-mentioned Ethernet devices that need high power consumption for any applications designed for large industries, enterprises and communities.

Vahekaabel CAT6A UTP 5,0m must(ultrapehme TPA 3,6mm)

Vahekaabel CAT6A UTP 1,0m must(ultrapehme TPA 3,6mm)

Vahekaabel CAT6A UTP 0,5m must(ultrapehme TPA 3,6mm)

Vahekaabel CAT6A UTP 0,5m valge(ultrapehme TPA 3,6mm)

Vahekaabel CAT6A UTP 0,25m valge(ultrapehme TPA 3,6mm)