The latest Wi-Fi 7 technology: Delivers dual-band speeds of up to 2882 Mbps (5 GHz) and 688 Mbps (2.4 GHz) using 160 MHz channels. Multi-Link Operation (MLO): Simultaneous data transmission on different bands to minimize congestion. Gigabit connectivity: 2.5 Gbps WAN port and 3 x 2.5 Gbps LAN ports. Simple setup and management.
Speed to perform. Flexibility to grow.XS1935 Series 10G multi-gig Lite-L3 switch 10G multi-gig - Supports multi-gig speeds up to 10G (10G/5G/2.5G/1G/100M) 90W PoE++ - Supporting 802.3bt (90W/port) & total PoE budget 400W Lite-L3 Features - Features with rich L2 functions and L3 static routing capability Cloud management - Zero-touch setup, remote management and monitoring Next-Gen networking starts with 10G multi-gig.The XS1935 Series 10G multi-gig switches deliver flexible connectivity with speeds up to 10G (100M/1G/2.5G/5G/10G) on all ports, enabling seamless network upgrades without replacing existing infrastructure. PoE models provide powerful PoE capabilities to power demanding devices such as WiFi 7 access points, IP cameras and other edge devices, while ensuring servers, NAS and workstations perform without bottlenecks.The series also includes a fibre variant with 10G SFP+ ports, designed for edge deployments and smaller aggregation environments, delivering high-speed fibre connectivity where it matters most.Dedicated networkedAV switch mode.Our networkedAV mode simplifies complex AVoIP installations with a dedicated switching mode built for AV professionals. It streamlines deployment while maintaining full control, providing fast access to the essential functionality needed to support AVoIP installations at scale.Available on select switches, networkedAV mode delivers a pro-grade AV networking solution in just four steps. From digital signage to arena-scale visuals, it ensures low-latency, rock-solid streaming every time.10x faster networking. Up to 90W per port.The XS1935-12HP is built for the next generation of connectivity, delivering up to 10x the bandwidth of traditional 1G networks. This ensures the latest and next-generation WiFi access points, including WiFi 7, can operate at their full potential without being limited by wired infrastructure.With the speed and capacity modern businesses demand, the XS1935-12HP enables organizations to build networks ready for today and prepared for the future.With PoE++ delivering up to 90W per port (8x total), nearly 6x more power than traditional PoE (15.4W), the XS1935-12HP easily powers demanding devices including WiFi access points, IP cameras, video conferencing systems and smart IoT devices. A generous 400W PoE budget provides the capacity to support multiple high-performance devices, empowering next-generation networks from a single switch.Lite-L3 intelligence, compact by design.The XS1935 Series combines intuitive design with powerful Lite-L3 networking capabilities, giving growing businesses greater control over performance, traffic management and network segmentation. Features such as VLANs, enhanced QoS, link aggregation and Layer 3 static routing help optimize traffic flow and keep critical applications running smoothly.Everything can be easily managed through the intuitive web interface or centrally through Nebula Cloud, providing flexible deployment and simplified network management without the complexity of traditional command-line configuration. The result is smarter, more scalable networking designed for modern business environments.Click. Tap. Done.Get up and running in minutes with the Nebula mobile app. With just a few simple clicks, our user-friendly step-by-step wizard walks you through the entire installation process, no technical expertise required.Once connected, the intuitive interface gives you complete control, making it easy to adjust settings, monitor performance and manage your network anytime, anywhere.
The RB912 is also available in an outdoor enclosure, fit with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
Original part number NIC-GX1 Product name Gembird 1-GIGABIT PCI-Express Fast Ethernet Card, Realtek chipset Producer Gembird Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector RJ45 Type of bus connector PCI-E 1x Wake On Lan function no data Operating system Microsoft WindowsMac OSUNIXLinux Supported protocols and standards IEEE 802.3ab - 1000BaseTIEEE 802.3u - 100BaseTXIEEE 802.1Q-in-Q - VLAN TagIEEE 802.1p - PriorityIEEE 802.3x - Flow Control Chipset Realtec Additional information Single STP RJ45 port for either1000 Mbps, 100 Mbps or 10 Mbps network speedsSupports speed auto-negotiation, pair swap/polarity/skew correctioncrossover detectionAutomatic IRQ and I/O address setupSupports Full Duplex flow control (IEEE 802.3x), power saving, Wake-on-LANremote wake-up, PCI Message Signaled Interrupt (MSI)Chipset: RTL8111CDimensions: 120 x 80 x 20 mm, x1 slotNet weight: 32 g
Throughput: 960 Management, monitoring, configuration: - 1G Ethernet service port for out-of-band management (OOB, RJ45)- RS232 straight-through serial RJ45 for local management console- Mini-USB port for local management console- USB port for local storage, logs, configuration or image files Power consumption: 161
Ethernet LAN (RJ-45) PoE ports quantity 4 Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Auto MDI/MDI-X Yes MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Ventilation fan(s) No Power over Ethernet (PoE), W 120 SFP+ slots quantity 1 Maximum data transfer rate, Gbit/s 7.44 Switch type Unmanaged Ports quantity 5 Storage temperature range (T-T), °C -40 - 70 °C Jumbo Frames support Yes Supported data transfer rates 10/100/1000 Mbps Weight, g 500 Dimensions W x D x H, mm 29.1 x 107.3 x 139 Operating temperature range (T-T), °C 0 - 50 °C Power consumption, W 44.5 Switch layer L2/3 Switching capacity, Gbit/s 128 MAC address table, entries 16000 Power over Ethernet (PoE) Support Yes
Access Point 10/100 Mbit/s, Ethernet LAN (RJ-45) ports 5, Wi-Fi standards 802.11a/n/ac, Antenna type Internal, 2.4/5.0 GHz, Data transfer rate (max) 0.867 Gbit/s
Incorporating the latest Multi-Stream Transport (MST) technology, the CS1922M 2-Port USB 3.0 4K DisplayPort MST KVMP Switch is the world's first DisplayPort KVM switch with a built-in MST hub. The CS1922M enables users to adopt two console displays from a single DisplayPort 1.2 video source, providing an extended desktop mode and splitter mode at resolutions up to 4K for multitasking across two displays while reducing bulky cable connections.To meet the ever-increasing demand for high-speed peripheral data transmissions, the CS1922M integrates a USB 3.1 Gen 1 hub to deliver unprecedented data transfer rates up to 5 Gbps - allowing you to maximize multitasking operations.The unique independent switching feature allows the KVM switch's focus to be on one computer while its USB peripheral focus is on another computer. This eliminates the need to purchase a separate USB hub or stand-alone peripheral sharer - such as a print server or splitter. Additionally, the switch allows you to share the audio from each of the connected computers and even allows HD audio transmitted through a DisplayPort source.With a rich feature set, the CS1922M is designed to exceed the requirements such as excellent video quality and ultra-fast data transmission speed for gaming, graphic design, animation, and video-editing applications.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
Built to Fight Noise With Prism Active RF Filter The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronization) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Using airMAX ac technology, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). It also offers the following features:All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the PrismStation 5AC for your specific installation requirements:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mounting30°60°90°Management Wi-Fi Radio The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Enhanced Co-Location Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.Improved Noise Immunity PrismStationTM AC blocks or spatially filters out noise,so noise immunity is improved.This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Hight MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The PrismStationTM AC also gets maximum gain out of the smallest footprint. Beam Performance Perfected The PrismStationTM can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Now with airOS®8 Sporting an all-new design for improved usability, airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX® ac products
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1 x RJ45 2-ühenduse tüüp: 1x male USB C-type värv: Space Gray Lisaandmed: 1x USB-C 3.1 ühenduspesa, for connecting to a laptop, tablet või PC, 1x Ethernet GLAN RJ-45 port toetab 10 / 100 / 1000 Mbps speeds, toetab Wake-on-LAN, Jumbo frame Kuni 9k bytes, detection of kaabel crossover, tugi IEEE 802.3az (Energy Efficient Ethernet, IPv4/IPv6 pack Checksum Offload Engine (COE) to punaneuce CPU loading, kiibistik Realtek RTL8153, Powered through USB bus, no power adapter is needed, OS Lisainfo: i-tec USB-C Metal Gigabit Ethernet Adapter
Features- 4-port DVI KVMP Switch with USB 2.0 and 2.1 Surround Sound Audio- One USB console controls four computers and two additional USB devices- 2-port built in USB 2.0 hub fully compliant with the USB 2.0 specification- Full bass response for high quality 2.1 channel surround sound systems- Computer selection via front panel pushbuttons, hotkeys, and mouse- Multiplatform support – Windows, Linux, Mac, and Sun*- Independent switching of KVM, USB, and Audio focus- DVI digital and analog monitor support – fully compliant with the DVI specifications- Superior video quality: 1920 x 1200 @ 60Hz (Single Link); 2560 x 1600 @ 60Hz (Dual Link)- nVidia 3D Vision Ready: Works with 120Hz LCD monitors and active shutter glasses to create a 3D environment with maximum resolution of up to 1920 x 1080- HDCP compatible- Support widescreen resolutions- Video DynaSync™ – Exclusive ATEN technology that eliminates boot-up display problems and optimizes resolution when switching between ports- Power on detection – if one of the computers is powered off, the switch will automatically switch to the next powered-on computer- Console mouse port emulation/bypass feature that supports most mouse drivers and multifunction mice- Console keyboard emulation/bypass feature that supports most gaming / multimedia keyboards- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping – supports English, Japanese, and French keyboards- Auto Scan Mode for monitoring all computers- Firmware upgradable* PC keyboard combinations emulate Mac/Sun keyboards* Mac/Sun keyboard work only with their ownPackage Contents- 1x CS1784A USB DVI Dual Link KVMP™ Switch- 4x 2L-7D02UD DVI-D KVM Cable Sets- 1x 0AD6-1605-24EG Power Adapter- 1x User InstructionsKontrollitavate arvutite arv4Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-IUSB 2.0 portide arv2DC-pistikJahMaksimaalne resolutsioon2560 x 1600 pikslitMaksimaalne digitaalresolutsioon1920 x 1200 pikslitMaksimaalne analoogresolutsioon1920 x 1080 pikslitToote värvMustLED-indikaatoridJahMaterjalMetallSisseehitatud ekraanEiVõimsustarve (tüüpiline)10 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius87 mmSügavus270 mmKõrgus55 mmKaal930 gKiirpaigaldusjuhendJahJuhendJahÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)270 x 87 x 55 mm
Features- One PS/2-USB VGA console controls two VGA interface computers.- Dual Interface - supports computers with PS/2 or USB keyboards and mice- Computer selection via front panel pushbuttons, hotkeys, and mouse- Multiplatform support - Windows, Linux, Mac, and Sun- Superior video quality - 2048 x 1536; DDC2B- Video DynaSync™ - Exclusive ATEN technology eliminates bootup display problems and optimizes resolution when switching between ports- Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping - supports English, Japanese, and French keyboards- Gaming keyboard support- Auto Scan Mode for monitoring all computers- Firmware upgradable- Non-powered* 1. PC keyboard combinations emulate Mac/Sun keyboards* 2. Mac/Sun keyboard work only with their own computersPackage Contents- 1x CS82U PS/2-USB KVM Switch- 2x 2L-5302UP PS/2 USB KVM Cables- 1x User InstructionsKontrollitavate arvutite arv2Klaviatuuri pordi tüüpUSB, PS/2Hiire pordi tüüpUSB, PS/2Videopordi tüüpVGAPS/2-portide kogus2USB 2.0 portide arv2DC-pistikJahVGA (D-Sub) portide arv3Maksimaalne resolutsioon2048 x 1536 pikslitLED-indikaatoridJahSisseehitatud ekraanEiSkaneerimisintervall20 sVõimsustarve (tüüpiline)1,1 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahSertifikaatCN ZL 99213861.2, CN ZL 01260527.1, CN ZL 02301203.X, US 6564275, US 6464197, TW 174875, TW 081926Laius87 mmSügavus140 mmKõrgus55 mmKaal540 gKaablid kaasa arvatudKVMÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)87 x 140 x 55 mmÜhilduvad operatsioonisüsteemidWindows, Linux, Mac, SunToitenõuded5VDCTehnilised omadusedDDC2BEkraani resolutsioon sagedusel2048 x 1536 @ 60 Hz
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5 Lisaandmed: Practical pass-through design for easy crimping, Gold plated 2-fork internal contacts for both solid ja stranded LAN kaablid, sobib conductors of max. 24 AWG värv: Transparency
