Gigabit Power over Ethernet (PoE) injector 24V 0.5A 12W with IEC-320 C6 3 pin inlet for C5 series and A5x. Requires C5 3 pin power cord.Power cord not included!
Omnidirectional multiband LTE MIMO 2x2 antennaQuOmni LTE omnidirectional MIMO 2x2 LTE antenna is working in Vertical polarization it´s desired for LTE/3G/2G connections. The antenna can be used for the most popular LTE bands (e.g. 3 7 20) frequencies 694-2700 MHz. That antenna is predicted to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains buses lorries yachts boats to receive Internet by LTE/3G. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
QuCam for RUT240 is a powerful outdoor industrial gateway for professional CCTV application with embedded PoE switch for up to 3x CCTV cameras and place to install Teltonika RUT240 (not included in gateway set). QuCam for RUT240 also has integrated omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder.RUT240 LTE router is shown for demonstration only and not included!
QuPanel 5G/LTE directional MIMO 2x2 high gain antenna is predicted for 5G and 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for 5G bands n77 n78 and LTE bands like LTE700 / 800 / 1800 / 1900 / 2100 / 2300 / 2600 / 3400 / 3800. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 5G / LTE / 3G / 2G modems and routers.
QuPanel LTE MIMO 4x4Directional multiband LTE MIMO 4x4 antennaQuPanel LTE directional MIMO 4x4 antenna is predicted for 4G LTE high categories from cat 5 up to cat 19. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with all MIMO 4x4 LTE modems and routers working in categories: cat 5 cat 6 cat 7 cat 9 cat 10 cat 11 cat 12 cat 13 cat 15 cat 16 cat 18 cat 19.Cable length: 5m
QuCam for RUT240 is a powerful outdoor industrial gateway for professional CCTV application with embedded PoE switch for up to 3x CCTV cameras and place to install Teltonika RUT240 (not included in gateway set). QuCam for RUT240 also has integrated omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder.RUT240 LTE router is shown for demonstration only and not included!
QuPanel LTE HP MIMO 2x2Directional High Power multiband LTE MIMO 2x2 antennaQuPanel LTE HP directional MIMO 2x2 high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
The Archer VR400 unlocks the full potential of your Internet connection by providing combined dual band Wi-Fi speeds of up to 1.2 Gbps, including 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band, eliminating lag and buffering from your online experience. Two dedicated Wi-Fi networks support more devices and reduce wireless interference to create stable connections.
LtAP LR8 LTE - a compact all-in-one solution with LTE GPS and wireless support for LoRa® in a rugged heavy-duty case!Inside the heavy-duty case there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem the other one is populated with the concentrator gateway card for LoRa® technology.There are three powering options: DC jack PoE-in and automotive.Internet-of-things has never been so affordableTo fully understand what this device can do we need to talk about Internet-of-things. Let’s start with an example. Imagine a farmer who has cattle an irrigation system for the crops and storage for the goods. On a day-to-day basis he needs to: track the animals monitor the grain stock level control the irrigation system For all these tasks the farmer can use low-cost wireless sensors. By connecting them to the LtAP - he can gather the real-time data combine it with the location information of the vehicle and send it to the cloud via high-speed LTE. Now all the information he needs to monitor and plan the growth of his farms is in one place. So simple and so handy. The wireless technology behind this is called LoRa® which stands for Long Range. It requires very low power. That’s why LoRa® is the best way to build your Internet-of-things solutions. LoRa® can be used for anything from smart homes to agriculture supply chains logistics and even smart cities. Monitor parking spaces track utility services measure environmental data and so on - the possibilities are endless.There is even a free server infrastructure that you can use - The Things Network fully supported by the LtAP LR8 LTE kit. With a large community of enthusiasts and developers around the world you will never be alone with your questions regarding the LoRa® network.Perfect for logistics and trackingThere are 3 MiniSIM slots you can use to set up automatic switching between mobile operators. Very convenient if you have to cross the border regularly. The device features two internal LTE antennas but you can use the U.FL connectors to add external antennas of your choice for even better coverage. The same goes for the GPS – you can attach an external antenna as well. By the way Mikrotik has provided a simple application example on the RouterOS documentation website so you can start real-time location tracking right away!The Things NetworkMikrotik products for LoRa® are ready to work with “The Things Network” - the famous open source infrastructure that provides free LoRa® network coverage and has tons of apps for your needs. With the help of “The Things Network” you can get started with the Internetof- things within a day. And it is easily upgradable to enterprise-grade network “The Things Industries”.The setup is so easy - anyone can learn it. No need to reinvent the wheel – join “The Things Network” to save time and energy with smart solutions!
BLUE PUCK MOVExtend device limits with new Bluetooth 4.0 LE movement sensor! Teltonika is always focused on innovation and constantly offers new solutions to customers. Latest addition of BLE sensors extends covered business cases: assets trailers or any other spec equipment motion status monitoring angular position and unexpected movement detection. Bluetooth motion sensors are small signal transmitters with configurable signal strength and data send intervals. Sensor uses advanced Bluetooth 4.0 LE technology to get data from long distance and can work from one battery up to 12 years.List of devices compatible with this accessory: FMC125 FMC130 FMM125 FMM130 RUTX11 RUTX10
Teltonika FMC640 is a PROFESSIONAL series device with 4G (LTE Cat 1) network coverage including 3G (UMTS) 2G (GSM) fallback compatibility. Device equipped with GNSS and LTE modules external GNSS and LTE antennas. FMC640 will maximize your fleet efficiency with features like FMS CAN data (J1939) fuel CAN data (J1708) tachograph live data (K-Line) remote tachograph file download various third party RS232 or RS485 devices support and Dual-SIM.Terminal is suitable for applications like international logistics refrigerated transport agriculture construction & mining security & emergency services and even more.
UniFi® Access Hub is an intelligent IP networked single door controller a part of UniFi Access solution. The UniFi Access Hub comes with versatile interfaces including support for most electric bolts/strikes magnetic locks and 12V access accessories such as motion sensors push buttons and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access Controller software. Easily manage users visitors schedules and access policies with the with the intuitive browser-based interface.Features: Powered by 802.3bt (PoE++) switch Three 802.3af PoE ports for UniFi readers and G3 Flex surveillance camera 12V powered and dry relays compatible with most locks Four inputs for motion sensors request-to-exit devices and door position switch Managed with UniFi Access Controller in UDM-Pro DIN-rail mounting Note: UniFi Dream Machine Pro is required to run UniFi Access (NOT included and sold separately!)
FMB020 – the best choice for someone looking for a practical OBD solution.FMB020 is an ultra-small OBDII plug and track device with GNSS GSM and Bluetooth connectivity for a true connected car application. It is a perfect tracker for a wide range of use cases – including fleet management of light commercial vehicles driver log-book insurance telematics (UBI) car rental & leasing and more.FMB020 device supports crash detection functionality that allows the user to be notified when a car crash happens. By using the accelerometer data received during the crash it is possible to visualize the angle and measure the force with which the vehicle was hit. This could prove to be useful in Insurance Telematics solutions. The device supports various Bluetooth Low energy sensors beacons hands-free headsets firmware and configuration updates via Bluetooth. Worldwide version. 2G (GSM): B2 B3 B5 B8. Please check if 2G is supported in your country before order.
BLUE PUCK MAGExtend device limits with new Bluetooth 4.0 LE magnet contact sensor!Teltonika is always focused on innovation and constantly offers new solutions to customers. Latest addition of BLE sensors extends covered business cases: doors hood or similar objects open/close status monitoring. In combination with sensor it is necessary to use additional magnet. Sensor can send information when magnet is attached/detached. Bluetooth magnet sensors are small signal transmitters with configurable signal strength and data send intervals. Sensor uses advanced Bluetooth 4.0 LE technology to get data from long distance and can work from one battery up to 5 years.List of devices compatible with this accessory: FMC125 FMC130 FMM125 FMM130 RUTX11 RUTX10
UniFi® Category 6 indoor Ethernet cable is designed for your UniFi and general indoor network deployments that require plenum-rated cabling.Available in lengths of 1000 ft (305 m) UC-C6-CMP is Category 6 UTP (Unshielded Twisted Pair) cabling that supports speeds of up to 1 Gbps. It uses 23 AWG solid copper conductor pairs and an anti-crosstalk divider which improves pair isolation.CMP (Communications Multipurpose cable Plenum) cabling is for use in plenum areas where air is typically circulated in a building. Cables for these areas must adhere to strict manufacturing requirements ensuring that they can be used in these spaces.Features: Category 6 UTP 23 AWG solid copper conductor twisted pair CMP flame rating For 1000BASE-T Ethernet applications (bandwidth speed test up to 600 MHz for reference) Available in lengths of 1 000 ft (305 m)
Newly introduced FMC125 is a small ADVANCED series device with 4G (LTE Cat 1) network coverage including 3G (UMTS) 2G (GSM) fallback compatibility. Device equipped with GNSS/Bluetooth and LTE modules internal GNSS and LTE antennas. FMC125 developed on the existing Teltonika FMB platform therefore it keeps all of the functionalities from FMB125 and builds on top of them with its industry-leading connectivity coverage.Device is designed for communication with various third party RS232 or RS485 devices like digital fuel sensors (LLS) Garmin navigation device RFID reader and much more. It is also excellent for refrigerated transport because it has extended input/output set and 1-wire interface for temperature monitoring. The Dual-SIM feature provides a backup communication channel where the coverage of a singular operator is not sufficient. As well Dual-SIM feature will let you significantly reduce roaming costs.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Meie Din Rail ühenduskarp pakub lõppkasutajale laia valikut paindlikkust. Standardkorpus sisaldab hingedega ühenduslülihoidikut, mis sisaldab kuni 24 ühenduskatet ja 1 kaabliläbiviiku sissetulemiseks.
Meie Din Rail ühenduskarp pakub lõppkasutajale laia valikut paindlikkust. Standardkorpus sisaldab hingedega ühenduslülihoidikut, mis sisaldab kuni 24 ühenduskatet ja 1 kaabliläbiviiku sissetulemiseks.
Fiiberoptika ühendus/patch paneelid on 19“ laiused ning kõrgusega 1U või 2U. Paneelid on liikuva esipaneeliga kui ka liikuvate küljekinnitustega, mis tagab parema juurdepääsetavuse paigalduse ajaks. Paneelid on kahes erinevas värvitoonis RAL 7035 (hall) ja RAL 9005 (must)
