Võrguseadmed

See Delocki 4-pini ventilaatorikaabel PWM-toega võimaldab ventilaatori ühendust laiendada. 4-pini ventilaatori pistikupesa sobib ka 3-pini ventilaatori pistiku ühendamiseks ilma PWM-toeta.     Spetsifikatsioon - Pistikud:   1 x 4-pini ventilaatori pistikupesa isane >   1 x 4-pini ventilaatori pistikupesa (emane) - Kaabli gabariit: 22 AWG - PWM-juhe (impulsslaiendus) - Pikkus koos pistikutega: ca. 100 cm     Süsteeminõuded - Põhiplaat vaba 4-pini liidesega     Pakendi sisu - Ventilaatori pikenduskaabel

Moxa Wall mounting kit, 51mm wide

Dual RS-485 remote I/O with built-in repeater Supports the installation of multidrop communications parameters Install communications parameters and upgrade firmware via USB Upgrade firmware through an RS-485 connection Wide operating temperature models available for -40 to 85°C (-40 to 185°F) environments The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive data at high speed over long distances. In addition to communication configuration by software or USB and dual RS-485 port design, Moxa’s remote I/O devices eliminate the nightmare of extensive labor associated with the setup and maintenance of data acquisition and automation systems. Moxa also offers different I/O combinations, which provide greater flexibility and are compatible with many different applications. Easy-to-Use Software Interface for Easy Maintenance With Moxa’s easy-to-use ioSearch software, you can quickly access all of an ioLogik R1200 device’s status information and settings with a user-friendly graphical user interface. Furthermore, ioSearch also provides an easy method for updating firmware for all ioLogik R1200 devices over an RS-485 network, so you can even update your firmware remotely. The free and easy-to-use ioSearch software reduces the maintenance time and labor required to set up your communication interface. When more than one ioLogik R1200 are on the same RS-485 network, you no longer need to turn hundreds of dials during setup. Instead, simply configure and duplicate each ioLogik R1200’s baudrate and mode through the graphical user interface. This convenient software feature reduces maintenance engineers' effort, and greatly simplifies upgrading your device's configuration compared with more traditional methods. Innovative Hardware Design Reduces Deployment Effort and Enhances Maintenance Efficiency With the industry’s first RS-485 serial remote I/O with USB design, Moxa provides an innovative solution for upgrading and configuring RS-485 remote I/O communication devices and firmware. All you need to do is upload the configurations to a USB drive, plug it into the field device, and all the configurations and firmware updates will upload to the field device automatically. Cost-Saving Hardware Design for Backup and Redundancy Moxa’s ioLogik R1200 Series provides dual RS-485 ports so that when one of your RS-485 ports is damaged, you can quickly switch to the other RS-485 port for quick testing or repair. RS-485 remote I/O devices are already considered a low-cost technology, but with dual RS-485 ports, Moxa helps you save a little bit more. With the ioLogik R1200, you can take advantage of our dual RS-485 ports to set up wiring, provide computer redundancy, or back up your network using two computer topologies. For wiring redundancy, when your computer detects that one of the RS-485 connections is not responding, it can quickly switch over to the other RS-485 line to guarantee continuous communication between field sensors and the central computer. Furthermore, users have the freedom to define the settings. For computer redundancy, the ioLogik R1200 provides system operators with a secure backup when one system goes down.

Features and Benefits Protocol conversion between PROFIBUS and Modbus TCP Supports PROFIBUS DP V1 master Supports Modbus TCP client/server Automatic scan of PROFIBUS devices and easy configuration Web-based GUI for I/O data visualization Embedded traffic monitoring/diagnostic information for easy troubleshooting Status monitoring and fault protection for easy maintenance Supports redundant dual DC power inputs and 1 relay output -40 to 75°C wide operating temperature models available Serial port with 2 kV isolation protection Security features based on IEC 62443 Introduction The MGate 5101-PBM-MN gateway provides a communication portal between PROFIBUS devices (e.g. PROFIBUS drives or instruments) and Modbus TCP hosts. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as oil/gas, power, process automation, and factory automation. Windows Utility for Easy Configuration and Traffic Monitoring The MGate Manager utility provides a user-friendly interface to make configuration and operation as easy as possible. Moxa’s innovative AutoScan function can automatically detect all connected PROFIBUS slave devices and their available I/O modules to quickly complete gateway configuration, after which an easy-to-read data mapping table is created to assist in the configuration of Modbus TCP master (e.g., SCADA, PLC) settings. In addition, users can configure import/export maintenance functions, and use embedded monitoring tools to maintain logs of Modbus communication packets, which can be used for troubleshooting. A Variety of Maintenance Functions The MGate 5101-PBM-MN provides a Web console and Telnet console for remote maintenance, with both consoles supporting encryption commutation functions such as HTTPS and SSH for preventing unauthorized access. The log functions are provided in firmware such as connection event of Modbus or PROFIBUS for maintenance. Users can monitor each I/O data and review the log through the web console remotely. A relay output alarm is provided for the power input status. It gives maintenance engineers an additional tool for troubleshooting and maintenance. Redundant Power Inputs The MGate 5101-PBM-MN has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources to provide uninterrupted operation even if one power source fails. The higher level of reliability makes these advanced PROFIBUS-master-to-Modbus-TCP gateways ideal for demanding industrial applications.

Seda Delocki juhtmega USB-viipkoodiskannerit saab ühendada arvuti või sülearvuti vabasse USB-A-tüüpi emasportti. Selle lineaarse vöötkoodiskänneri laserklassi 1 ja selle lineaarse CMOS-pildianduri abil saab kõiki levinud 1D-vöötkooditüüpe täpselt tuvastada isegi pikkade vahemaade tagant. Lisaks suudab see pihuarvuti vöötkoodiskanner lugeda ekraanidel ja monitoridel kuvatavaid vöötkoode. Skanner kohandab end automaatselt vastavalt ümbritseva keskkonna heledusele ja võtab optimaalsetes valgustingimustes kuni 280 skaneeringut sekundis. Vähese ümbritseva valguse korral valgustab vöötkoodi täiendav valge LED ja seda saab kasutada vähese valguse korral. Tänu kasutatud lasertehnoloogiale on laservalgus inimsilmale kahjutu.     Spetsifikatsioon - Liitmik: 1 x USB tüüp A isane - Resolutsioon: 1: 0,0762 mm - Käiviti: skaneerimisnupp - Lugemiskaugus: ca. 25 mm kuni 507 mm - Valgusallikas: laserklass 1, 650 nm - Valguse värvus: nähtav laser punane - Kompensatsioonivalgus: Valge LED - Andur: lineaarne CMOS-pildiandur - Skaneerimiskiirus: kuni 280 skaneerimist sekundis - Skaneerimisnurk: 41° - Ümbritsev heledus: max. 50000 luksi - Sisendpinge: 5 V - Voolutarve: V 5   töö: max. 160 mA   ooterežiim: max. 80 mA - Töötemperatuur: 0 °C ~ 40 °C - Säilitustemperatuur: -10 °C ~ 60 °C - Suhteline õhuniiskus: 0 - 95 % (ei kondenseeru) - Värv: must/hall - Kaal: umbes 170 g - Mõõtmed (LxSxK): ca. 156 x 71 x 91 mm - Kaabli pikkus: ca. 2 m - Skaneerimiskoodid:    UPC-A / UPC-E   EAN-8 / EAN-13   Maatriks 2 5-st   Hiina postikood (Toshiba kood)   Tööstuslik 2 5-st   Interleaved 2 of 5   Codabar   Kood 11   Kood 32   Standardkood 39   Täielik ASCII-kood 39   Kood 93   Kood 128   EAN / UCC 128   MSI Plessey kood   UK Plessey kood   Telepen kood   GS1 Databar   IATA kood     Süsteeminõuded - Linux 4.4 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64 - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port     Pakendi sisu - Vöötkoodi skanner - Kasutusjuhend

Seda Delocki klemmiplokkkaablit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole see kaabel mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Kaablile saab ühendada erinevaid seadmeid, millel on sobiv alalisvoolu toitepistik ja mis saavad eraldi toite (sõltuvalt seadme nõuetest).     Spetsifikatsioon - Pistikud:   1 x DC 5,5 x 2,5 mm isane nurkjas >   2 x avatud juhtmed - Positiivne poolus sees, negatiivne poolus väljas - Pinge: max. 12 ~ 36 V - Vool: max. 5 A - Kaabli gabariit: 23 AWG - Alalisvoolu poldi pikkus: ca. 9,5 mm - Pikkus ilma pistikuteta: ca. 50 cm     Süsteeminõuded - Vaba alalisvoolupesa 5,5 x 2,5 x 9,5 mm     Pakendi sisu - Kaabel

Moxa’s embedded serial-to-Ethernet device server modules are compact, power-efficient, and easy to integrate.

Moxa's terminal servers are equipped with the specialized functions and security features needed to establish reliable terminal connections to a network, and can connect various devices such as terminals, modems, data switches, mainframe computers, and POS devices to make them available to network hosts and process.

The NPort® 6000 is a terminal server that uses the SSL and SSH protocols to transmit encrypted serial data over Ethernet. Up to 32 serial devices of any type can be connected to the NPort® 6000, using the same IP address. The Ethernet port can be configured for a normal or secure TCP/IP connection. The NPort® 6000 secure device servers are the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort® 6000 Series ensures data transmission integrity with support for DES, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort® 6000, and each serial port on the NPort® 6000 can be configured independently for RS-232, RS-422, or RS-485 transmission. No Data Loss If Ethernet Connection Fails The NPort® 6000 is a reliable device server that provides users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort® 6000 will queue all serial data in its internal 64 KB port buffer. When the Ethernet connection is re-established, the NPort® 6000 will immediately release all data in the buffer in the order that it was received. Users can increase the port buffer size by installing an SD card. LCD Panel Makes Configuration Easy The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly. Note: The LCD panel is only available with standard-temperature models. Adjustable Resistor Values for RS-485 Communication The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.

Toitemoodul (110/220 VAC/VDC) koos süsteemi sisendiga, relee

Seda kompaktset Delocki mikro-USB-viivakoodiskännerit saab ühendada Androidi nutitelefoni või tahvelarvuti vabasse USB-tüüpi Micro-B emasporti. Skannerit saab kasutada otse ilma lisatarkvara paigaldamiseta ja see käivitub automaatselt. Selle lineaarse vöötkoodiskänneri ja selle lineaarse CMOS-pildianduri abil saab kõik levinud 1D-vöötkooditüübid automaatselt ja ilma skannimisnuppu kasutamata täpselt tuvastada. Lisaks suudab see vöötkoodiskanner lugeda ekraanidel ja monitoridel kuvatavaid vöötkoode. Skanner kohandab end automaatselt vastavalt ümbritseva keskkonna heledusele ja võtab optimaalsetes valgustingimustes kuni 650 skaneeringut sekundis. Kaitsekork ei kaitse transporditavat skannerit mitte ainult tolmu eest, vaid seda saab ka mugavalt ja mugavalt riiete külge kinnitada.   Spetsifikatsioon - Liitmik: 1 x USB 2.0 tüüp Micro-B OTG isane - Resolutsioon: 0,1 mm - Käivitus: automaatne - Lugemiskaugus: ca. 35 mm kuni 280 mm - Valgusallikas: valgusallikas: LED, 625 nm - Valguse värvus: nähtav LED punane - Andur: lineaarne CMOS-pildiandur - Skaneerimiskiirus: kuni 650 skaneerimist sekundis - Skaneerimisnurk: 41° - Ümbritsev heledus: max. 100000 luksi - Sisendpinge: 5 V - Voolutarve: V 5, V 5, V 5, V 5, V 5, V 5:   töö: max. 100 mA   ooterežiim: max. 55 mA - Töötemperatuur: 0 °C ~ 50 °C - Säilitustemperatuur: -20 °C ~ 60 °C - Suhteline õhuniiskus: 0 - 95 % (ei kondenseeru) - Värv: kuldne - Kaal: umbes 6,5 g - Mõõtmed (LxSxK): ca. 28,5 x 17,8 x 18,6 mm. - Skaneerimiskoodid:   UPC-A / UPC-E   EAN-8 / EAN-13   Maatriks 2 5-st   Hiina postiindeks (Toshiba kood)   Tööstuslik 2 5-st   Interleaved 2 of 5   Codabar   Kood 11   Kood 32   Standardkood 39   Täielik ASCII-kood 39   Kood 93   Kood 128   EAN / UCC 128   MSI Plessey kood   UK Plessey kood   Telepen kood   GS1 Databar   IATA kood     Süsteeminõuded - Android ex 4.1.1 - Androidi nutitelefon või tahvelarvuti OTG-funktsiooniga, HID-klaviatuur ja vaba USB-tüüp   Micro-B emasport     Pakendi sisu - Vöötkoodi skanner koos korgi ja klambriga - Kasutusjuhend

Toitemoodul (110/220 VAC/VDC) koos süsteemi elektritoite sisendiga, relee, PoE-toite sisendiga

Toitemoodul (24/48 VDC) koos süsteemi toite sisendiga, relee

Toiteallika moodul (24/48 VDC) koos süsteemi toite sisendiga, relee, PoE toite sisendiga

These hook-and-loop cable ties by Delock are ideal for space saving bundling of e.g. individual cables, wires, hoses or conduits. Reusable due to hook-and-loop fastener By using the strap, the cable tie can be securely fixed to a cable, so that the cable tie won’t get lost. The hook-and-loop fastener allows the cable tie to be quickly attached and easily removed again. The attached clamp at the strap ensures strength, stability and secure bundling. Eyelet for fastening The eyelet allows the fixing or hanging of the cable bundle by a screw e.g. on a wall. Perfectly organized and versatile The hook-and-loop cable ties are compatible with all types of cables e.g. network cables, USB cables, HDMI cables, charging cables, power cables etc. Whether in the office, at home or at work, the cables always remain neatly sorted and leave a tidy overall impression. The hook-and-loop cable ties are the perfect solution for keeping things tidy and preventing cable tangles.   Specification • Length: ca. 150 mm • Width: ca. 20 mm • Loop for fixation to the cable • Eyelet for fastening on wall • Mounting hole diameter: ca. 7 mm • Hook-and-loop fastener for multiple reuse • Colour: green   Package content • 5 x hook-and-loop cable tie

This DIN rail end clamp is used to secure e.g. terminals or converters which are attached on the DIN rail. Safe support on the DIN rail The devices remain in their original position even during vibrations and they can not slip or fall out. Specification • DIN rail mounting: 35 mm • Material: stainless steel • Dimensions (LxWxH): ca. 45 x 15 x 10 mm Package content • 4 x DIN rail end clamp

SCSI VHDCI 68 to 8 x DB9(M) Cable with 100cm

These hook-and-loop cable ties by Delock are ideal for space saving bundling of e.g. individual cables, wires, hoses or conduits. Reusable due to hook-and-loop fastener By using the strap, the cable tie can be securely fixed to a cable, so that the cable tie won’t get lost. The hook-and-loop fastener allows the cable tie to be quickly attached and easily removed again. The attached clamp at the strap ensures strength, stability and secure bundling. Perfectly organized and versatile The hook-and-loop cable ties are compatible with all types of cables e.g. network cables, USB cables, HDMI cables, charging cables, power cables etc. Whether in the office, at home or at work, the cables always remain neatly sorted and leave a tidy overall impression. The hook-and-loop cable ties are the perfect solution for keeping things tidy and preventing cable tangles.   Specification • Length: ca. 150 mm • Width: ca. 20 mm • Loop for fixation to the cable • Hook-and-loop fastener for multiple reuse • Colour: red   Package content • 5 x hook-and-loop cable tie

These hook-and-loop cable ties by Delock are ideal for space saving bundling of e.g. individual cables, wires, hoses or conduits. Reusable due to hook-and-loop fastener By using the strap, the cable tie can be securely fixed to a cable, so that the cable tie won’t get lost. The hook-and-loop fastener allows the cable tie to be quickly attached and easily removed again. The attached clamp at the strap ensures strength, stability and secure bundling. Perfectly organized and versatile The hook-and-loop cable ties are compatible with all types of cables e.g. network cables, USB cables, HDMI cables, charging cables, power cables etc. Whether in the office, at home or at work, the cables always remain neatly sorted and leave a tidy overall impression. The hook-and-loop cable ties are the perfect solution for keeping things tidy and preventing cable tangles.   Specification • Length: ca. 150 mm • Width: ca. 20 mm • Loop for fixation to the cable • Hook-and-loop fastener for multiple reuse • Colour: blue   Package content • 5 x hook-and-loop cable tie

These hook-and-loop cable ties by Delock are ideal for space saving bundling of e.g. individual cables, wires, hoses or conduits. Reusable due to hook-and-loop fastener By using the strap, the cable tie can be securely fixed to a cable, so that the cable tie won’t get lost. The hook-and-loop fastener allows the cable tie to be quickly attached and easily removed again. The attached clamp at the strap ensures strength, stability and secure bundling. Perfectly organized and versatile The hook-and-loop cable ties are compatible with all types of cables e.g. network cables, USB cables, HDMI cables, charging cables, power cables etc. Whether in the office, at home or at work, the cables always remain neatly sorted and leave a tidy overall impression. The hook-and-loop cable ties are the perfect solution for keeping things tidy and preventing cable tangles.   Specification • Length: ca. 190 mm • Width: ca. 25 mm • Loop for fixation to the cable • Hook-and-loop fastener for multiple reuse • Colour: black   Package content • 5 x hook-and-loop cable tie