Võrguseadmed

Redundant fiber ring with zero recovery time Examines network-wide fiber communication from a single converter Auto baudrate detection and data speed of up to 12 Mbps PROFIBUS fail-safe prevents corrupted datagrams in functioning segments Alarm by relay output 2 kV galvanic isolation protection Dual power inputs for redundancy Extends PROFIBUS transmission distance up to 45 km Wide-temperature model available for -40 to 75°C environments Supports Fiber Signal Intensity Diagnosis

Automatic CO/CPE negotiation reduces configuration time Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain LED indicators to simplify troubleshooting Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km. The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting. Additional Features and Benefits Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality) Moxa proprietary Turbo Speed connections up to 15.3 Mbps Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Supports SNMP v1/v2c/v3 for different levels of network management Interoperable with Turbo Ring and Turbo Chain network redundancy Support Modbus TCP protocol for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent transmission IPv6 Ready

Ethernet Interface PoE Ports (10/100BaseT(X), RJ45 connector) 8 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection Standards IEEE 802.3af/at for PoE/PoE+ output Optical Fiber Optical Fiber Power Parameters Power Consumption 1.21 W (max.) Physical Characteristics Weight 260 g (0.58 lb) MTBF Time 338,800 hrs Standards Telcordia (Bellcore), GB Warranty Warranty Period 5 years

Moxa's IM-6700A series has a rich and versatile selection of Fast Ethernet modules for IKS-6726A/6728A modular Ethernet switches. Choose from 6- or 8-port Fast Ethernet modules with copper or fiber optic (SC/ST/LC) connectors. With such a great selection, users can easily set up a versatile connectivity solution well-suited for specific application needs. (Large image) [Note] IM-6700A-8PoE is supported by IKS-6728A-8PoE series

Features and Benefits Front-end intelligence with Click&Go Plus control logic, up to 48 rules Active communication with MX-AOPC UA Server Automatically complement disconnection period data with MX-AOPC UA Logger software 4-port unmanaged switch built in for linking to Ethernet devices I/O expansion port for daisy chaining up to 8 ioLogik E1200 units 3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field Supports SNMPv1/v2c/v3 Simplify I/O management with MXIO library for Windows or Linux platforms Wide operating temperature range of -40 to 75°C (-40 to 167°F) Introduction The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses. Powerful Control Logic from the New Click&Go Plus™ The new Click&Go Plus™ control logic now supports up to 48 rules with further upgrades to 8 onditions/actions. In addition, its graphical user interface provides 3 logic gates and 3 multi-layers, helping you build more powerful and efficient IO solutions. Once you finish setting up your Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus™ rules before uploading them to your online devices. Peer-to-peer (P2P) mode is widely used for industrial applications. Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically. One IP for Multiple Expansion I/Os Gives You a Smarter Data Acquisition Solution The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8 ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network. User-Friendly IOxpress with Offline/Online Configuration for Easy Device Management IOxpress integrates a user-friendly interface with offline/online configuration, allowing you to configure every I/O parameter offline, and then upload the settings to your online devices, greatly reducing the time and cost needed to manage and configure your IO solutions. Powerful Datalogger and Value-added MODBUS Gateway The ioLogik 2500 supports micro SD cards with up to 32 GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2 serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network. New MX-AOPC UA Server Efficiently Reduces System Response Time The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is easier, since you won’t need to worry about DCOM settings. In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur. In this way, information can be accurately and efficiently pushed to the SCADA system as it becomes available.