DS-7616NXI-I2/S(E) IP recorder For 16-channel IP camera inputs, plug & play with 16 Power-over-Ethernet (PoE) interfaces Video formats H.265+/H.265/H.264+/H.264 Ability to decode up to 2 channels at 12 MP or 3 channels at 8 MP or 6 channels at 4 MP or 12 channels at 1080p Incoming bandwidth up to 160 Mbps Adopt Hikvision Acusense technology to minimize manual effort and security costs Smart function All channels support motion detection 2.0 Dual-channel video analysis for people and vehicle recognition to reduce false alarms 1-channel facial recognition for video stream or 4-channel facial recognition for facial image Intelligent search for selected video area and intelligent playback to improve playback efficiency Professionalism and reliability H.265+ compression effectively reduces storage space by up to 75% Adopt TLS stream encryption technology, which ensures a more secure streaming service HD video output Provide independent HDMI and VGA outputs HDMI video output in resolution up to 4K Storage and playback Up to 2 SATA interfaces for connecting a hard drive (up to 10 TB capacity per hard drive) 16-channel synchronous playback Network and Ethernet access 16 independent PoE network interfaces 1 self-adaptive 10/100/1000 Mbps Ethernet interface Hik-Connect for easy network management
High-speed transmission and stable connectionThe Qoltec UTP CAT6 single-core copper cable with a diameter of 0.52 mm and a length of 100m is a reliable solution for data transmission in Gigabit Ethernet networks. Designed to support speeds of up to 1 Gb/s and frequencies of 250 MHz, it guarantees smooth and stable communication between network devices.Stable connection for 4K films and high-quality multimediaIt is the ideal solution for applications requiring high bandwidth, such as 4K video streaming, online gaming, remote working, and large file transfers in corporate and home networks.Achieve a new level of network efficiencyConsists of eight twisted pairs of wires, Robust PVC insulation protects the wires from mechanical damage and ensures flexibility during installation,Made of single-core twisted pair, each pair of wires is covered with an insulating layer that protects against interference,Conductor made of copper,Unshielded - no additional protective shielding, Stability over long distances,High quality workmanship and durability of installation for years, confirmed by a guarantee.Ideal for LAN networks, smart TVs, routers, and consolesChoose a reliable connection the Qoltec Cat6 cable is the perfect solution for your home, office and gaming. It guarantees a stable signal, high transmission speed and resistance to interference, ensuring smooth and uninterrupted Internet browsing, video streaming and online gaming. It is ideal for the office and home for file transfers, HD and 4K video streaming, video conferencing or working with a NAS server. Choose a cable that will provide your network with stability, speed and a long-lasting connection for years to come.
• 25GBASE-SR/SW SFP module • Up to 25 Gbps link speed • Supports 50 µm and 125 µm multi mode fiber (max. distance 100 m) • Wavelength 850 nm • LC connector • Connection to SFP28 ports • Swappable during system operation
• Multi-Gigabit access switch with 36x 2.5G and 12x 10G multi-Gigabit Ethernet ports as well as 4x 25G SFP28 and 2x 100G QSFP28 uplink or stacking ports • PoE support as per IEEE 802.3bt PD-Type 4 on all 48 Ethernet ports with up to 1,440 watts PoE budget • Support of Virtual Port Channel (VPC or MC-LAG) to implement networks with 100% uptime • Full layer 3 functionality thanks to VRRP, DHCP, static and policy-based dynamic routing via OSPF v2/v3 and BGP4 • Backplane stacking optionally (SW-defined) via SFP28 or QSFP28 ports • Incl. 1x hot-swappable PSU (second PSU optional) and 2x redundant (n+1), hot-swappable fans for maximum reliability • Security with configurable access control on all ports as per IEEE 802.1X and access control lists • Secure remote management through TACACS+, SSH, SSL, and SNMPv3 • Industry standard CLI • Cloud-managed LAN and switch stacking for fast configuration and convenient management via the LMC • IPv6 and IPv4 support for modern enterprise networks • Including switch slide-in rails (2x 19” mounting brackets and telescopic slides), serial & micro-USB configuration cables, and IEC power cord
Robust Full PoE++ Power Solution Tailored for Harsh EnvironmentsThe IGS-4215-8UP4X is PLANET's latest Industrial-grade, DIN-rail L2/L4 Managed Gigabit PoE++ Switch, designed for heavy industrial environments. It features intelligent PoE functions, IPv6/IPv4 dual stack management, and a built-in L2/L4 Gigabit switching engine. Featuring 8 10/100/1000BASE-T ports supporting 95-watt 802.3bt PoE++ and 4 10GBASE-X SFP+ fiber slots, the IGS-4215-8UP4X ensures unwavering, stable performance. Its power budget of 360 watts accommodates diverse PoE applications, and it operates in temperatures from -40 to 75 °Celsius, showcasing adaptability. Enhancing versatility, the switch includes a USB Type C console port for seamless management and resides in a rugged IP30 aluminum casing, guaranteeing durability and reliability in challenging industrial environments.Cybersecurity Network Solution to Minimize Security RisksThe IGS-4215-8UP4X supports SSHv2 and TLSv1.2 protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe IGS-4215-8UP4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.High Power and Full-speed Data Delivered over 4-pair UTP CablingThe IGS-4215-8UP4X meets the standards of IEEE 802.bt PoE++ technology and has a total power capacity of 1440 watts. This allows it to supply up to 95 watts of power to each remote PoE-compliant powered device (PD) using all four pairs of standard Cat5e/6 Ethernet cabling, ensuring high power and full-speed data delivery. Compared to the conventional 802.3at PoE+, it offers triple power capacity, making it the perfect solution for higher power consuming PDs, including:PoE PTZ speed dome camerasNetwork devicesThin clientsAIO (all-in-one) touch PCs, point of sale (POS) and information kiosksRemote digital signage displaysPoE lightingsIntelligent Powered Device Alive CheckThe IGS-4215-8UP4X can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-8UP4X will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing the administrator’s management burden.Scheduled Power RecyclingThe IGS-4215-8UP4X allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingsUnder the global trend of energy saving and contributing to environmental protection, the IGS-4215-8UP4X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you enable or disable PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.802.3bt PoE++ Power and Ethernet Data Transmission Distance ExtensionIn "Extended" operation mode, the IGS-4215-8UP4X functions on a per-port basis with a 10Mbps duplex operation. Remarkably, it can deliver a 40-watt PoE power output over a distance of up to 250 meters, surpassing the standard 100m limit on Ethernet UTP cables. This innovative feature offers a solution for extending the reach of PoE power, effectively eliminating the need for additional Ethernet cable installations and resulting in cost savingsEffective Alarm Alert for Better ProtectionThe IGS-4215-8UP4X incorporates a Fault Alarm feature that promptly notifies users of any issues with the switches. This valuable feature eliminates the need for users to spend time locating the problem, resulting in significant time and human resource savings.Digital Input and Digital Output for External AlarmThe IGS-4215-8UP4X supports Digital Input and Digital Output through a terminal block located on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-4215-8UP4X port shows link down, link up or power failure.Environmentally Hardened DesignWith the IP30 aluminum industrial case, the IGS-4215-8UP4X provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 °C, the IGS-4215-8UP4X can be placed in almost any difficult environment.Robust ProtectionThe IGS-4215-8UP4X provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.IPv6/IPv4 Dual Stack ManagementSupporting both IPv6 and IPv4 protocols, the IGS-4215-8UP4X helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.Robust Layer 2 FeaturesThe IGS-4215-8UP4X can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. With dynamic port link aggregation, the switch enables the creation of a high-speed trunk. For instance, it can combine four 10G ports, creating a resilient 40Gbps connection with fail-over support. Additionally, the inclusion of Link Layer Discovery Protocol (LLDP) enhances Layer 2 functionality by providing essential information about neighboring devices within the local broadcast domain.Efficient Traffic ControlThe IGS-4215-8UP4X is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.Enhancing Network SecurityPLANET IGS-4215-8UP4X offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Ensuring Network IntegrityThe IGS-4215-8UP4X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.User-friendly and Secure ManagementFor efficient management, the IGS-4215-8UP4X is equipped with Command line, Web and SNMP management interfaces.With the built-in Web-based management interface, the IGS-4215-8UP4X offers an easy-to-use, platform-independent management and configuration facility.For text-based command line management, it can be accessed via Telnet, SSH and the console port.By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.Moreover, the IGS-4215-8UP4X offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session.Flexible Long-distance Extension SolutionThe emergence of 10G Ethernet marks a significant advancement in Ethernet technology. The IGS-4215-8UP4X is a powerful networking device that offers four 10G SFP+ slots capable of supporting three different speeds. These slots can operate at 10GBASE-SR/LR or 1G/2.5GBASE-SX/LX backwards, providing administrators with flexibility in choosing the most suitable SFP/SFP+ transceiver based on the required transmission distance and speed. With ample bandwidth and robust processing capacity, the IGS-4215-8UP4X provides an efficient solution for administrators seeking to enhance their network infrastructure.Intelligent SFP Diagnosis MechanismThe IGS-4215-8UP4X supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Remote Management SolutionPLANET's Universal Network Management System (UNI-NMS) and CloudViewerPro app provide robust support for IT staff in effectively managing and monitoring all network devices, including the IGS-4215 series, from remote locations. Tailored for deployment in both enterprises and industries where the IGS-4215 series is utilized remotely, these systems enable the identification of bugs or faulty conditions without the need for on-site visits. With UNI-NMS or the CloudViewerPro app, businesses of all types can now be swiftly and efficiently managed through a unified platform, streamlining operational oversight.
Tootekood: Festa FS318G(UN)GTIN: 8885020623994Võrguseadmed
The TP-Link Fiesta FS318G V1 is a versatile rack-mountable switch designed to meet various networking demands. With capacities for up to 16 static routes and 32 IP interfaces, this device offers reliable performance that scales with your networking needs. Its fanless design ensures quiet operation, making it suitable for sensitive environments while providing a robust solution for effective network management with features such as VLAN support, IGMP snooping, and secure remote management protocols including SNMP and SSH.Constructed with a durable metal housing, the Fiesta FS318G V1 also includes extensive support for energy efficiency, thanks to Energy-Efficient Ethernet (EEE) technology. This switch's capability to handle 10/100/1000Base-T connections ensures high-speed access, complemented by its support for Jumbo Frame of 9KB, which optimizes data flow in larger networks. With features like automatic topology detection and firmware upgradability, the TP-Link Fiesta FS318G V1 provides a comprehensive solution for both small and growing networks alike.
8 x 10/100Mbps PoE+ ports200W PoE+ power budgetHardened IP30 rated metal mini switchExtreme operating temperature range of -40° – 75°C (-40° – 167°F)1.6Gbps switching capacityIncludes DIN-Rail mount and wall mount bracketsPower supply sold separately (model: TI-S24052, TI-S24048)NDAA / TAA compliant
Enterprise-grade 24-port, Layer 3 Etherlighting™ PoE+++ switch with high-capacity 10 GbE RJ45 and 25G SFP28 connections for high availability system design.
Die PCI Express Karte von Delock bietet zwei Netzwerkanschlüsse mit einer Übertragungsrate von bis zu 1000 Mbit/s. Die PCIe > 2 x Gigabit LAN Karte unterstützt Wake On LAN (WOL), 9k Jumbo Frames und PXE.
• Wi-Fi 7 access point with 4x4 MU-MIMO tri-band Wi-Fi – parallel operation in 2.4 GHz, 5 GHz, and 6 GHz for up to 19 Gbps • OFDMA for more efficient Wi-Fi channel utilization • Dedicated scan radio for continuous radio field monitoring • 1x 10 GE and 1x 2.5 GE ports, 2x PoE++ (IEEE 802.3bt) • Dual PoE for seamless failover in the event of a power failure on one port; alternatively configurable load balancing to combine different PoE classes on the two ports • IoT support: Bluetooth Low Energy (5.1) and USB 3.0 • Housing with protection class IP50 and UL-2043 • Innovative design incl. theft-resistant and flexible mounting plate • Automatic wall/ceiling mounting detection • Certified fire resistance and low smoke properties in the event of fire (UL2043) • Power-saving functions with precise consumption measurement • Automated deployment, operation, and optimization via the LANCOM Management Cloud (LMC) • WLAN controller support (including layer 3 tunneling)
