Xiaomi Router AC1200 EU 802.11ac, 300 + 867 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support No, MU-MiMO Yes, No mobile broadband, Antenna type 4 External Antennas
TP-LINK AX6000 8-Stream Wi-Fi 6 Router with 2.5G Port Archer AX80 802.11ax, 4804+1148 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 3, MU-MiMO Yes, No mobile broadband, Antenna type External, 1× USB 3.0 Port
Omada Gigabit VPN Router - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Five Gigabit Ports: High-speed wired connectivity. - Up to 4 WAN Ports: 1 gigabit WAN port and 3 gigabit WAN/LAN ports with load balance raise the utilization rate of multi-line broadband. - Highly Secure VPN: Supports up to 20× LAN-to-LAN IPsec, 16× OpenVPN*, 16× L2TP, and 16× PPTP VPN connections. - Abundant Security Features: Advanced firewall policies, DoS defense,IP/MAC/URL filtering, and more security functions protect your network and data.
The Ubiquiti UniFi Device Bridge Pro is designed to provide robust wireless connectivity in various environments. With an antenna gain level of 19 dBi and support for advanced wireless protocols like IEEE 802.11a/n/ac, this device ensures strong signal transmission over long distances. It has a range of up to 5 km in open space, suitable for applications where network extension is essential.This device is built to withstand extreme conditions, operating in temperatures from -40°C to 60°C and humidity levels between 5% to 95%. The weatherproof, UV-resistant casing protects the internal components, making it a reliable option for outdoor installations. Equipped with Power over Ethernet (PoE) capabilities and efficient performance reaching up to 867 Mbps on the 5 GHz band, the Ubiquiti UniFi Device Bridge Pro is an effective solution for establishing a resilient wireless bridge.
"Tenda Nova Mesh System EX3 (3 tk) on mitmekülgne ja tõhus kodune Wi-Fi lahendus, mis on loodud selleks, et kõrvaldada surnud tsoonid ja tagada sujuv internetilevi kogu kodus. See kolmekomplektiline võrgusüsteem sobib ideaalselt suurematesse ruumidesse või mitmekorruselistesse kodudesse ja tagab, et saate nautida tugevat ja järjepidevat Wi-Fi-signaali igas nurgas. EX3-seadmed töötavad koos, kasutades täiustatud võrgutehnoloogiat, et luua ühtne võrk, mis annab teile ühe Wi-Fi nime (SSID) ja välistab vajaduse vahetada võrku, kui te ruumis ringi liigute. Lihtne seadistamine mugava Tenda rakenduse abil - saate samm-sammult ühendada ja hallata oma võrgu seadeid ükskõik kust. Nutikad võrgu optimeerimisfunktsioonid valivad automaatselt kiireima võimaliku andmeside tee, et vähendada puhverdamist ja viivitusi, mistõttu on see ideaalne video voogedastuseks, võrgumängudeks ja mitme seadme samaaegseks toetamiseks. Lisaks on Tenda Nova Mesh Systemil tugevad turvaprotokollid, mis kaitsevad teie andmeid ja seadmeid häkkimise eest. Seadmete moodne, kuid samas tagasihoidlik disain sulandub sujuvalt teie kodu sisustusse, pakkudes samas võrratut ühenduvust ja usaldusväärsust. Ükskõik, kas töötate kodus, striimite oma lemmiksaateid või domineerite online-mängudes, Tenda Nova Mesh System EX3 on loodud selleks, et pakkuda suure jõudlusega Wi-Fi ühenduvust lihtsuse ja stiiliga.
The Zyxel XGS1935-28HP is a robust managed switch designed to enhance network performance with advanced Layer 3 Lite capabilities. With a forwarding capacity of 128 Gbps and a forwarding rate of 95.2 Mpps, this switch accommodates the needs of modern networks. The model features 24 10/100/1000 ports with Power over Ethernet (PoE+) capabilities and four 10 Gigabit SFP+ uplink ports, ensuring seamless connectivity and efficient power management for various devices.Designed to operate in a wide temperature range from -20°C to 50°C, the Zyxel XGS1935-28HP withstands extreme storage conditions between -40°C to 70°C. The switch supports features such as VLAN support, Quality of Service (QoS), IGMP snooping, and port security, making it versatile for different networking environments. With compliance to various industry standards and equipped with features like energy-efficient Ethernet, this managed switch is a choice for organizations looking to optimize their network infrastructure.
i-tec C31NANOLANPD100. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Ethernet LAN-i andmeedastuskiirused: 100,1000 Mbit/s. Toote värv: Hall, Ühilduvad ...
SAVIO AK-69 USB-C 3.1 Gen 1- SATA 2,5" Adapter USB-C adapter AK-69, is a cable characterized by high quality and reliability. You can transfer data, charge devices, and connect accessories. Thanks to the Plug&Play function, the electronic accessory does not require installing additional drivers. Moreover, it is compatible with all Windows, macOS, and Linux operating systems. Practicality The AK-69 adapter from Savio, thanks to its USB-C end, is used to transfer data from one device or drive to another. It is especially useful in a situation where you have an older type of SSD (SATA) drive and you want to plug it into a new laptop, to rip the files you need. AK-69 can be used as an adapter, allowing you to create a 2.5" drive into an external data storage device. Fast data transmission The AK-69 offers high-speed data transmission of up to 5 Gbps over the SATA connector. This is a serial interface used in computers for communication between the processor and storage and optical drives. The speed offered is perfect for fast, efficient, and hassle-free file exchange. Practicality and convenience Savio's adapter features convenience in use, thanks to its 25 cm long cable. It is long enough to provide flexibility of use but short enough to be easy to carry and not get tangled. Supporting 2.5" HDDs and SSDs with the USB-C adapter involves connecting the drives to a computer or other device with a USB-C port. This is done without having to place them internally in the enclosure. Technical specifications: Data transmission: SATA III up to 5 Gbps and SATA II up to 3 Gbps Hard drive support: up to 10 TB Supported drives: 2.5" Cable length: 25 cm. Plug and Play: Yes, no additional drivers are required Dimensions: 45 × 42 × 11.5 mm Weight: 19 g
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
Security algorithms TKIP/WPA-EAP/WPA-PSK/WPA2-PSK/WPA2-Enterprise/OWE/AES-CCMP/EAP-TLS/WPA3-EAP/WPA3-SAE | 1xEthernet LAN (RJ-45) ports | Antenna type Internal | Weight 285 g | Operating temperature (T-T) 0 C to 50 C C
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
5-Port 10/100Mbps Desktop Switch Five 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supportedEasily wired network expansionCompact design for flexible arrangementPlug and play setup, no configuration required
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
Price/Performance Breakthrough The EdgeRouter™ 6P offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 6p can be rack-mounted with the use of the EdgeRouter Rack Mount Kit, model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 6P is supported and managed by UNMS™ (Ubiquiti® Network Management System), a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
