5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMmodulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsnever possible before.The SXT ac is a new member in our 802.11ac product lineup, currently two models areavailable — with regular 28 degree antenna, and the SA model with a 90 wide beamwidthsector antenna. Also supports 802.11a/n mode and is compatible with all legacyRouterBOARD devices, including Nstream and Nv2 protocols. Both devices come withGigabit Ethernet.• 1300mW RF output• extended temperature range -30C to +80C• up to 540Mbps throughput• low latency Point to Point
CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features,it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance forall sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning TreeProtocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for yourdemanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hotenvironments two redundant fans will automatically keep the system cool if needed. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding,apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IPheader fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Web-based GUI• 800 Mhz CPU• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Link Aggregation (LACP)• Access Control List• MikroTik neighbour discovery• SNMP v2/v3• rackmount and tabletop Switching resultsCRS317-1G-16S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput239,583.3122,666.737,828.9154,947.413,085.2158,906.4SwitchingNon blocking Layer 2 capacity239,583.3245,333.337,828.9309,894.713,085.2317,812.7SwitchingNon blocking Layer 1 throughput239,583.3161,000.037,828.9161,000.013,085.2161,000.0SwitchingNon blocking Layer 1 capacity239,583.3322,000.037,828.9322,000.013,085.2322,000.0
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
Gross depth (mm): 99 mm Gross height (mm): 104 mm Gross width (mm): 171 mm Packing quantity: 1.00 pc(s) Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: Yes Other features: with AC Passthrough Paper/Pasteboard: 110 g Plastic (No PET): 3 g Producer product name: RE365 Producer product family: Extender Ethernet LAN (RJ-45) ports: 1 POE: no PoE Wi-Fi band: 802.11ac Antenna type: 2xExternal Ethernet LAN data rates: 10/100/1000 Mbit/s Wi-Fi data rate (max): 300+867 Mbit/s Frequency band: 2.4GHz/5GHz MU-MiMO: No
RB5009UPr+S+OUT An outdoor version of our best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
Security algorithms TKIP/WPA-EAP/WPA-PSK/WPA2-PSK/WPA2-Enterprise/OWE/AES-CCMP/EAP-TLS/WPA3-EAP/WPA3-SAE | 1xEthernet LAN (RJ-45) ports | Antenna type Internal | Weight 285 g | Operating temperature (T-T) 0 C to 50 C C
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
