Gigabit Dual Band AX1500 router from Totolink The Totolink X2000R is an AX1500 Wi-Fi 6 router, built with the latest generation of Wi-Fi 6 technology. Featuring OFDMA, the X2000R delivers Wi-Fi speeds of up to 1501Mbps, offering a faster and more stable internet connection to other wireless devices. Meanwhile, a full gigabit WAN port and LAN ports offer enhanced data streaming capabilities over a wired connection. In addition, Band Steering, MU-MIMO and Beamforming contribute to significant performance improvements. It is the ideal choice for homes or offices with a high demand for internet access. Totolink X2000R features Compliant with next generation Wi-Fi standard 6 (IEEE 802.11ax) Simultaneous throughput of 1201Mbps on 5GHz and 300Mbps on 2.4GHz, for a total of 1501Mbps MU-MIMO technology allows data to be transmitted to multiple devices simultaneously Beamforming technology allows intensive signal transmission to other devices connected to the wireless network Full Gigabit ports offer enhanced data streaming capabilities over a wired connection Bandwidth control for full utilisation of multiple bands and improved user experience Supports WPA3 wireless security protocols to ensure network security Configuration from a smartphone Next-generation Wi-Fi 6 Wi-Fi 6 (IEEE802.11ax) provides a huge increase in speed and total capacity and takes Wi-Fi to the next level, while maintaining backward compatibility with IEEE802.11a/b/g/n/ac Wi-Fi standards. The X2000R features the latest Wi-Fi 6 wireless technology for faster speeds, more capacity and less network congestion. Ultra-fast Wi-Fi speeds of 1501Mbps The Totolink X2000R is compliant with the latest Wi-Fi 6 (IEEE802.11ax) standard, providing Wi-Fi speeds of up to 1201Mbps on the 5GHz band and 300Mbps on the 2.4GHz band. It is capable of operating simultaneously on both the 2.4GHz and 5GHz bands and provides speeds of up to 1501Mbps. OFDMA - More devices, less congestion The X2000R can easily handle dozens of devices streaming and playing at the same time - OFDMA increases bandwidth by 4 times, allowing simultaneous transmission to more devices. OFDMA splits a single spectrum into multiple units and allows different devices to share a single transmission stream, increasing performance and reducing latency. Easy Mesh, seamless roaming throughout the home EasyMesh is a simple way to create a Mesh network with a single Wi-Fi name for seamless coverage of your entire home. When you move around the house, the device will automatically switch between the X2000R for seamless roaming. Four external antennas, wide Wi-Fi coverage Four high-performance external antennas and Beamforming technology focus the signal on individual clients for wider coverage. Adaptive WAN/LAN ports The router no longer differentiates between WAN (dial-up port) and LAN (Internet access port) ports, but uses adaptive WAN/LAN. Users can connect an Internet access line to any network port to surf the Internet. MU-MIMO technology The latest MU-MIMO technology allows multiple devices to connect at the same time, with each device enjoying high internet speeds separately. IPTV function IPTV is one of the most useful features on the X2000R, which allows you to enjoy online videos at home, greatly improving users' multimedia access experience. Band Steering Band Steering allows the router to transmit signals in two bands over the same SSID. Depending on the real-time speed of the internet, the router can select a band with higher speed and less interference for users. It has functions that direct wireless devices (which support two bands) to connect to the faster 5GHz Wi-Fi and can reduce 2.4GHz Wi-Fi congestion for those devices that only support 2.4GHz. Therefore, Band Steering not only allows you to take full advantage of the benefits of a multi-band network, but also improves the user experience.
"Cisco Catalyst 1300-24XT kommutaator kuulub Cisco täielikult hallatavate kommutaatorite sarja, mis pakuvad usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudes. Need kommutaatorid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebi armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
This 2-in-1 USB KVM cables are designed to connect a USB computer to the TRENDnet TK-803R and TK-1603R KVM switches. These cables consist of a USB keyboard/mouse cable and monitor cable bonded into a single device. Monitor: VGA/SVGA HDB 15-pin Male to Male Keyboard/Mouse: USB 1.1 Type A Connect computers with VGA and USB ports to a TRENDnet TK-803R, TK-804R, TK-1603R or TK-1604R KVM switch Length:3.1m Color: black
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
Lihtne paigaldus 4 x Gigabit PoE+ porti ja 1 x Gigabit porti Võtab DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. DIP-kommutaator toetab VLAN-portide isoleerimist ja QoS-i 10 Gbps lülitusvõimsus 32W PoE eelarve Seinale paigaldatav disain Vastupidav metallist lüliti Kasutage koos TRENDneti PoE jagajaga, et ühendada võrku ja toita mitte-PoE-seadmeid 5-pordiline Gigabit Long Range PoE+ Switch, mudel TPE-LG50, edastab andmeid ja toite üle olemasolevate Ethernet-kaablite Power over Ethernet (PoE) seadmetele, nagu pääsupunktid, VoIP-telefonid ja IP-kaamerad. See toetab nii PoE (802.3af) kui ka PoE+ (802.3at) seadmeid 32 W PoE-eelarvega. Võta DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel, et pikamaa PoE-installatsioonid saaksid toimida. Ühendage ja mängige see tugev metallist lüliti usaldusväärseks kiireks PoE-võrguks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. PoE+ võimsus 32 W PoE-võimsuse eelarve toetab kuni nelja Power over Ethernet seadet. Gigabit Viis Gigabit-porti pakuvad 10 Gbps kommutatsioonivõimsust, et toetada servavõrkude paigaldamist. Pikaulatuslik PoE+ kommutaator Võta DIP-lüliti kasutusele, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta 32 W võimsuse eelarvega. Pordid Neli Gigabit PoE+ porti ja üks Gigabit-port Pikaulatuslik PoE+ Võtab DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) pikkade PoE-paigaldiste jaoks. Portide isoleerimine DIP-lüliti on ideaalne järelevalvevõrkude rakenduste jaoks, kuna see võimaldab ka portide 1-4 isoleerimist. Lülitusvõimsus 10 Gbps lülitusvõimsus Korpus Seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad PoE ja pordi olekut
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 19.500 A, erhöhter Berührungsschutz, Master-Slave-Funktion (1x Master / 5x Slave), einstellbare Schaltwelle (ca. 8 bis 80 W), zweipoliger Ein-/Ausschalter, Gesamtleistung max. 16 A / 3.500 W, Stecksystem DE (Stecker-Typ F)
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
See Delocki dokkimisjaam võimaldab USB-C™-liidese kaudu ühendada väliselt kuni kaks 2,5″ või 3,5″ SATA HDD- või SSD-ketast. See lahendus ei nõua välist korpust, sest ketta saab ühendada otse dokkimisjaama. Lisaks võimaldab kloonimisfunktsioon kopeerida ühe kõvaketta sisu teisele ilma arvutit kasutamata. Spetsifikatsioon Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ emane 2 x SATA 6 Gb/s 22-pooluseline pesa 1 x alalisvoolu pesa Kiibistik: Asmedia ASM1352R Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti 2,5″ ja 3,5″ SATA HDD / SSD jaoks Sobib kõikidele SATA HDD-dele kuni SATA 6 Gb/s kiirusega Andmeedastuskiirus kuni 6 Gb/s LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta Mõõtmed (LxSxK): ca. 153 x 110 x 62 mm Plug & Play Toiteallika spetsifikatsioon Seina toiteallikas Sisend: V / 50 ~ 60 Hz / 1,5 A Väljund: 12 V / 3 A Maandus väljastpoolt, pluss seestpoolt Mõõdud: ø ca. 2,1 mm, seestpoolt: ø ca. 2,1 mm väljast: ø ca. 5,5 mm pikkus: ca. 10 mm Süsteeminõuded Linuxi tuum 4.9.4 või uuem versioon Mac OS 10.13.3 või uuem versioon Windows 7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Dokkimisjaam Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 80 cm Väline toiteallikas 12 V / 3 A Kasutusjuhend
RG-RAP2260(G) Reyee Wi-Fi 6 AX1800 Ceiling Access Point Build ultra-fast network with Wi-Fi 6 technology. Client connections over 500, better multi-user experience. Provide higher practical performance for users as well. Easily install extra AP with Reyee Mesh technology. Set up Wi-Fi 6 network in 3 minutes with Ruijie Cloud APP.
See Delocki adapter võimaldab ühendada USB Type-C™ sisendiga seadme USB Type-A emasportiga. Spetsifikatsioon - Liitmikud: 1 x USB 2.0 Type-A isane (host): 1 x USB 2.0 Type-A isane (host) 1 x USB Type-C™ female (seade) - Andmeedastuskiirus kuni 480 Mbit/s - Maksimaalne väljundvool: 3 A - Pinge: max. 5 V - Värv: must - Mõõtmed (LxSxK): ca. 20 x 15 x 7 mm Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB-C™ adapter
unshielded LAN/network cable to connect network components with 2 RJ45 connectors UV- and water resistant double outer jacket (PE) with gold plated PINs with strain relief and latch protection suitable for 10/100/1000 Mbit-networks pair-sequence acc. to EIA/TIA 568B