See D-Sub-klemmiplokkide adapter on valmistatud spetsiaalseks tööstuslikuks kasutamiseks, nt üksikute juhtmete ühendamiseks avatud kaablipeadega. Seda saab kasutada ka hobi valdkonnas, näiteks mudelraudteevedude puhul. Spetsifikatsioon - D-Sub 37-pin emane - 3 x 13-pin klemmiplokk (37 pini ühendatud) - Pitch 3,81 mm - Tööpinge / -vool: max. 12 V / 2 A - Keermestatud mutritega emasport - Mõõtmed (LxSxK): 69,7 mm x 69,32 mm x 16,05 mm Pakendi sisu - Klemmiplokk
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Spetsifikatsioon - Liitmikud: 1 x 37-pin D-Sub-istmik 1 x 39-pin klemmiklots - 3 x 13-pin klemmiplokk (37 pini ühendatud) - Pinge: 24 V - Vool: 0,5 A - Pitch: 3,81 mm - Kruvidega liitmik - Mõõtmed (LxSxK): ca. 69,70 x 69,32 x 16,05 mm Pakendi sisu - Adapter
Seda Delocki kaablit EASY-USB isendiga saab ühendada USB-A emasportiga mõlemas suunas. Seega saab isasporti kasutada mõlemalt poolt ja ühendada pistikuga hõlpsasti. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A pööratav isane > 1 x USB 2.0 Type-B isasühendus - USB-A isasport on kasutatav mõlemas suunas - Kaabli mõõtmed: Kaabli mõõtmed: 28 AWG andmeliin 24 AWG toiteliin - Kaabli läbimõõt: ca 4,5 mm - Kullatud pistikud - Värv: must - Pikkus koos pistikutega: ca. 0,5 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port - USB B-tüüpi pordiga seade Pakendi sisu - Kaabel
Description This antenna cable by Delock is suitable to supply an antenna signal in the interior of a device. Due to the loose sealing ring on the base plate on the SMA panel socket ensures a splash-proof connection to the unit. Specification • Connectors: 1 x SMA jack bulkhead 1 x MHF® I plug • Thread length: 10 mm • Splash proof • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: black • Length incl. connectors: ca. 10 cm System requirements • Device with one free SMA or MHF® I port Package content • Antenna cable • Nut and Locking Ring
Description The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification • Connectors: 1 x SMA jack bulkhead > 1 x MHF® I plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: black • Length incl. connectors (L): ca. 7 cm System requirements • Device with one free SMA or MHF® I port Package content • Antenna cable • Nut, toothed washer
This terminal block adapter by Delock can be used to connect bare wires. Thus the adapter is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Protection by enclosure The plastic enclosure protects the PCB from dirt and damage. Strain relief The screw-on strain relief fixes the cable in the enclosure. Specification • Connectors: 1 x serial Sub-D15 male (2 rows) with nuts 1 x 16 pin terminal block • Pin assignment: 1:1 • Pitch: 3.81 mm • Useable for a cable gauge from 26 to 18 AWG • Operating temperature: -20 °C ~ 105 °C • Dimensions (LxWxH): ca. 71 x 42 x 21 mm System requirements • A free Sub-D15 female Package content • Adapter • 1 x strain relief • 2 x locking screws
This terminal block adapter by Delock can be used to connect bare wires. Thus the adapter is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Protection by enclosure The plastic enclosure protects the PCB from dirt and damage. Strain relief The screw-on strain relief fixes the cable in the enclosure. Specification • Connectors: 1 x serial Sub-D15 female (2 rows) with nuts 1 x 16 pin terminal block • Pin assignment: 1:1 • Pitch: 3.81 mm • Useable for a cable gauge from 26 to 18 AWG • Operating temperature: -20 °C ~ 105 °C • Dimensions (LxWxH): ca. 71 x 42 x 21 mm System requirements • A free Sub-D15 male port Package content • Adapter • 1 x strain relief • 2 x locking screws
This terminal block adapter by Delock can be used to connect bare wires. Thus the adapter is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Protection by enclosure The plastic enclosure protects the PCB from dirt and damage. Strain relief The screw-on strain relief fixes the cable in the enclosure. Specification • Connectors: 1 x serial Sub-D15 female (2 rows) with screws 1 x 16 pin terminal block • Pin assignment: 1:1 • Pitch: 3.81 mm • Useable for a cable gauge from 26 to 18 AWG • Operating temperature: -20 °C ~ 105 °C • Dimensions (LxWxH): ca. 78 x 42 x 21 mm System requirements • A free Sub-D15 male port Package content • Adapter • 1 x strain relief • 2 x locking screws
This terminal block adapter by Delock can be used to connect bare wires. Thus the adapter is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Protection by enclosure The plastic enclosure protects the PCB from dirt and damage. Strain relief The integrated strain relief fixes the cable in the enclosure. Specification • Connectors: 1 x VGA 15 pin female with screws 1 x 10 pin terminal block • Pitch: 3.81 mm • Useable for a cable gauge from 26 to 18 AWG • Operating temperature: -20 °C ~ 105 °C • Dimensions (LxWxH): ca. 51.8 x 34.4 x 21.0 mm System requirements • A free VGA interface Package content • Adapter • 1 x strain relief • 2 x locking screws
This terminal block adapter by Delock can be used to connect bare wires. Thus the adapter is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Protection by enclosure The plastic enclosure protects the PCB from dirt and damage. Strain relief The integrated strain relief fixes the cable in the enclosure. Specification • Connectors: 1 x serial Sub-D 9 male with nuts 1 x 10 pin terminal block • Pin assignment: 1:1 • Pitch: 3.81 mm • Useable for a cable gauge from 26 to 18 AWG • Operating temperature: -20 °C ~ 105 °C • Dimensions (LxWxH): ca. 51.8 x 34.4 x 21.0 mm System requirements • A free Sub-D 9 pin female Package content • Adapter • 1 x strain relief • 2 x locking screws
