Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
The AmpliFi Instant Wi-Fi System includes a router with an easy-to-use touchscreen display, 1 Gigabit Ethernet port, a WAN port, an Ethernet cable, and one MeshPoint with an Ethernet port to maximize coverage and eliminate dead zones in your home. The AmpliFi Instant Wi-Fi system provides superior coverage with a range of up to 4,000 sq. ft and quick setup for whole home coverage with seamless Wi-Fi.
Ultra-high-speed, Wave 2 MU-MIMO Wireless LAN Solution PLANET WDAP-C7210E 1200Mbps Wave 2 Dual Band 802.11ac Wireless AP supports central management through PLANET NMS controllers. With IEEE 802.11ac Wave 2 MU-MIMO 2T2R dual-band technology, the WDAP-C7210E provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz. Benefits of MU-MIMO under 802.11ac Wave 2 With the MU-MIMO Wave 2 technology, the WDAP-C7210E, installed in public areas such as hotspots, airports and conferences, reduces the frustration that Wi-Fi users often experience in downloading web pages, e-mail file attachments and media contents. For cellular operators, the WDAP-C7210E provides a better Wi-Fi user experience, reducing the likelihood of users turning off Wi-Fi and putting more load on the cellular network. For enterprises, this technology also can solve Wi-Fi congestion issues in open work spaces and conference rooms. Powerful Dual-band WLAN Solution PLANET WDAP-C7210E, adopting the IEEE 802.11ac Wave 2 standard, provides a high-speed transmission of power and data, meaning two remote nodes in the 5GHz frequency band can be bridged. The 2.4GHz wireless connection can also be used simultaneously. Furthermore, the WDAP-C7210E adopts the high-class Qualcomm Atheros SoC (System-on-a-Chip), which provides higher stability to meet the stringent requirements of the solution. Advanced Security and Rigorous Authentication The WDAP-C7210E supports 128-bit WEP, WPA / WPA2, WPA-PSK and WPA2-PSK wireless encryptions, the advanced WPA2-AES mechanism and 802.1X RADIUS authentication, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. For management purposes, the IEEE 802.1Q VLAN supported allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access. Multiple Operation Modes for Various Applications The WDAP-C7210E supports AP, Gateway, WISP, Repeater and Super WDS modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access points, the WDAP-C7210E offers more powerful and flexible capability for wireless clients. Ceiling-mount Design for Your Environment With the standard IEEE802.3at Power over Ethernet (PoE) design, the WDAP-C7210E can be easily installed in the areas where power outlets are not available. By supporting the standard IEEE 802.3at PoE PD power scheme, the WDAP-C7210E can be powered and networked by a single UTP cable, effectively eliminating the needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system administrator is able to arrange the PoE schedule of the WDAP-C7210E by working with the managed PoE switch. Optimized Efficiency in AP Management The brand-new GUI configuration wizard helps the system administrator easily set up the WDAP-C7210E step by step. Besides, the built-in Wi-Fi analyzer provides real-time channel utilization to prevent channel overlapping to assure greater performance. With the automatic transmission power mechanism, distance control and scheduled reboot setting, the WDAP-C7210E is easy for the administrator to deploy and manage without on-site maintenance. Moreover, you can use PLANET NMS-500 or NMS-1000V AP control function to deliver wireless profiles to multiple APs simultaneously, thus making the central management simple. Extremely High Speed and Dual Band Make Wi-Fi Transmission More Powerful The WDAP-C7210E delivers the Dual Band technology to avoid signal interference and ensure the best Wi-Fi performance. It allows you to check e-mails and surf the Internet via the 2.4GHz band and simultaneously watch High-Definition (HD) video or any other multimedia application via 5GHz band. Moreover, the Gigabit Ethernet port of the WDAP-C7210E offers ultra-fast wired connections that utilize the maximum wireless bandwidth; therefore, users will have real wireless speed over 100Mbps. With outstanding stability of high-speed wireless transmission, the WDAP-C7210E can provide users with excellent experience in multimedia streaming with your mobile devices anywhere, anytime.
Väljapaistev 802.3bt PoE++ lahendus karastatud keskkondade jaoksIEEE 802.3bt Power over Ethernet Plus Plus tehnoloogiale vastav PLANET IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch pakub kaheksa 10/100/1000BASE-T 802.3bt PoE++ porti, millest iga port annab kuni 95 vatti ja kaks 100/1000/2500BASE-X SFP-liidest, mis on vastupidavas IP30 metallist korpuses, et töötada stabiilselt rasketes tööstuslikes nõudlikes keskkondades. See toetab rikkalikke PoE-töörežiime, sealhulgas 90-vatilisi 802.3bt Type-4 PoE++ porte, 95-vatilist PoH-režiimi (Power over HD-BASE-T) ja 4-poolset jõurežiimi, et lahendada mittestandardsete 4-poolsete PoE PD-de kokkusobimatus välitingimustes. Kuna IGS-6325 PoE++ Switch seeria suudab töötada laias temperatuurivahemikus -40 kuni 75 kraadi C, saab seda paigutada peaaegu kõikidesse keerulistesse keskkondadesse. IGS-6325 PoE++ lülitite seeria võimaldab ka kas DIN-riba või seinale paigaldamist, et kasutada efektiivselt kapi ruumi.802.3bt PoE++ - 90~95-vatine võimsus üle 4-paarilise UTP lahenduseKuna IGS-6325 PoE++ seeria võtab kasutusele IEEE 802.bt PoE++ standardi ja PoH tehnoloogia, on see võimeline pakkuma kuni 95 vati võimsust, kasutades kõiki nelja paari standardset Cat5e/6 Ethernet-kaablit, et edastada energiat ja täiskiirusega andmeid igale PoE-konformsele toitevõrguga kaugele seadmele (PD). See omab kolmekordset võimekust võrreldes tavalise 802.3at PoE+-ga ja on ideaalne lahendus, et rahuldada kasvavat nõudlust suurema energiatarbimisega võrgu PD-de järele.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
