S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections.Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
- Add one Gigabit Ethernet port- Add three 5 Gbps USB 3.0 ports- PC and Mac compatible- Flexible USB 3.0 cable accommodates most installations- Backward compatible with USB 2.0 and 1.1 ports- Full power for power hungry USB devicesPortide hulk4Jaoturi liidesedUSB 1.1,USB 2.0,USB 3.0 (3.1 Gen 1) Type-AUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk4Ethernet LAN (RJ-45) pordid1Andmeedastuskiirus5000 Mbit/sIsehäälestuvJahSertifikaatCE, FCCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3xToide USB kauduJahSisendpinge100-240Sisendsagedus50/60Väljundvool0,5 AToote värvValgeToetatud Windowsi operatsioonisüsteemidJahToetatud Maci operatsioonisüsteemidJahKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)0 - 90 °CLaius105 mmSügavus40 mmKõrgus25 mmKaal64 g
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
Features- One USB-PS/2 console controls up to 16 computers- Daisy-chain up to 31 additional units - control up to 512 computers from a single console- Front accessible USB port allows each computer to access USB peripherals*- Dual Interface - supports computers and console with PS/2 or USB keyboards and mice- Multiplatform support - Windows, Linux, Mac and Sun- Video DynaSync™ - stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution- Supports USB keyboards for PC, Mac and Sun- Auto PS/2 and USB interface detection- USB / PS/2 keyboard and mouse emulation - computers boot even when the console focus is elsewhere- Superior video quality - up to 2048 x 1536; DDC2B- No software required - convenient computer selection via front panel pushbuttons, hotkeys and multilingual on-screen display (OSD) menus- Auto-senses station's position on daisy-chained installations; no need for manual dip switch setting; front panel led indicates station's position- Port names automatically reconfigured when station sequence is changed- Two level password security; only authorized users view and control computers; up to four users and an administrator with separate profiles for each- Auto Scan feature for monitoring user-selected computers- Broadcast Mode - operation simultaneously performed on all selected computers... etc- Hot pluggable - add or remove computers without having to power down the switch- Buzzer on/off via hotkey and OSD- Firmware upgrades to all the chained KVM switch at the same time via the daisy-chain cable- Rack mountable in 19" system rack (1U)* The USB peripheral function only works with USB cable set connections. It will not work with PS/2 cable set connections.Package Contents- 1x KVM Switch with Standard Rack Mounting Kit- 1x 2L-5202P PS/2 KVM Cable- 1x 2L-5202U USB KVM Cable- 1x LIN5-27X6-U21G Console Cable- 1x Firmware Upgrade Cable- 1x Foot Pad Set(4 PCS)- 1x 0AD6-1605-24EG Power Adapter- 1x User InstructionsEthernet LANEiKontrollitavate arvutite arv16Klaviatuuri pordi tüüpEiHiire pordi tüüpEiVideopordi tüüpVGAUSB 2.0 portide arv1DC-pistikJahMaksimaalne resolutsioon2048 x 1536 pikslitPüstikmontaaž1UToote värvMustLED-indikaatoridVõimsusMaterjalMetallSisseehitatud ekraanEiSkaneerimisintervall255 sVõimsustarve (tüüpiline)6,6 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius433 mmSügavus160 mmKõrgus44 mmKaal2,85 kgJuhendJahÜhenduvustehnoloogiaJuhtmega ühendatudToitenõudedDC 5.3 VI/O-pordid1 x RJ-11
The Light Head Grid (LHG) is a compact and light wireless device with an integrated 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. We sell international version with working frequencies 5150MHz-5875MHz range.
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two self-tapping screws.
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable. Maximum suggested cable lenght is ~40 meters.
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
The DIGITUS industrial fast Ethernet switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port.It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
Ubiquiti POE-24-30W-G-WHis a PoE adapter designed to power various Ubiquiti devices. Compatible with most products (check the device specification before determining compatibility): airFiber airMAX EdgeMAX mFi UniFi AP UniFi Video / airVision. Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors. Ubiquiti PoE Adapter Compatibility with the airGateway™ Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network. The airGateway is available in three models: airGateway Standard model with an internal antenna airGateway Pro Dual-Band Wi-Fi model with an internal antenna airGateway-LR Long-range Wi-Fi model with an external antenna for extended range The airGateway plugs into any of these PoE Adapters: Model Number Compatibility POE-15-12W ✓ POE-24-12W ✓ POE-24-12W-G ✓* POE-24-7W ✓* POE-24-12W-G-WH ✓* * airGateway maximum LAN port speed: 100 Mbps
TRB255TRB255 is an industrial Gateway equipped with a number of Input/Output Serial Ethernet ports and LPWAN modem. With backwards compatibility to EGPRS (2G) network legacy industrial devices can be upgraded for extended use and support of LTE Cat M1 and NB-IoT ensures long lifecycle. Number of all features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial Gateway TRB255 is equipped with LPWAN modem GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features in one package: secure power connector I/O ports serial communication fast and reliable internet connection for industry applications where long lifecycle option is a must. TRB255 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of hardware and software features such as LTE Cat M1 NB-IoT SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises. Without this backward compatibility to EGPRS (2G) networks allows upgrade already working devices and ensures that after 2G network switch off your equipment will be accessible with support of LTE Cat M1 NB-IoT.
