• Must • Kontrollitavate arvutite arv: 2 • Klaviatuuri pordi tüüp: USB Hiire pordi tüüp: USB Videopordi tüüp: HDMI/DisplayPort • 4K Ultra HD 4096 x 2160 pikslit • Korpuse materjal: Metall • DC (alalisvool) 12 W Väline toiteadapter CLUB3D CSV-7210, 4096 x 2160 pikslit, 4K Ultra HD, 12 W, Must
• Juhitav • RJ-45 Etherneti ühenduse pesade arv: 24 • AC/PoE Power over Ethernet tugi NETGEAR GS728TXUP, Juhitav, Gigabit Ethernet (10/100/1000), Power over Ethernet tugi
Stable mobile Internet in all conditionsThe 5G directional antenna with 9dBi gain has been designed to improve the quality and stability of the mobile network signal. Thanks to its directional radiation pattern, the antenna concentrates energy in a selected direction, allowing it to precisely "target" the base station and achieve significantly better connection parameters than omnidirectional antennas. The wide operating range of 600-2700MHz covers the most important LTE bands used in Poland and Europe, including B28, B20, B3, B1 and B7, ensuring high compatibility with stationary and industrial routers as well as IoT devices. The additional 33003800 MHz range enables operation in modern 5G NR (n77/n78) networks, offering higher bandwidth and better transmission stability.Excellent performance and weather resistanceThe 5G antenna is designed to improve the quality of your internet connection at home, in the office, and in any other room with internet access. It increases transmission stability, improves download and upload speeds, and has a positive effect on overall internet performance. IP67 rating, combined with resistance to various weather conditions, can ensure connection stability even in difficult weather conditions.Our solution offers:- 5G standard support transmission speeds up to 600 Mbps,- a wide frequency range of 600-2700 MHz and 3300-3800 MHz,- SMA connector ensures compatibility with popular LTE devices: routers, mobile Internet gateways, USB modems,- modern design thanks to the use of high-quality materials and attention to detail,- 3-metre cable, allowing for convenient antenna installation.
Discover the full potential of your networkDiscover a reliable and efficient Plug&play network device. With 4 10/100 Mbps ports with PoE and additional Uplink ports (RJ45 100 Mbps), the device allows you to create a flexible and scalable LAN without unnecessary power cables, external power supplies or additional switches. Two Uplink ports allow you to conveniently connect the switch to a router, NVR recorder or another switch, facilitating the construction of a flexible and scalable network infrastructure.Reliable communication - Widely used in any spaceThe switch has been designed for users who need a reliable network connection in various environments:IP monitoring systems - Power IP cameras directly via an Ethernet cable,Wi-Fi access points,Ideal for expanding your home Ethernet network and powering network devices in one place, without complicated configuration,Building automation and IoT - Powering sensors, controllers and network devices in smart home and industrial automation systems,Video door phones and access control - in entry control systems, video door phones and recorders where a reliable PoE power supply is required. Power up and transfer data at speeds of up to 100 Mb/sDiscover new possibilities with the Qoltec device, which offers:4 RJ45 PoE Fast Ethernet 10/100 Mbps ports,2 RJ45 Uplink ports for connecting a router or further network expansion, Compliant with the IEEE 802.3af standard - offering up to 15.4W per port and a total of 65W output power for the entire switch,Automatic detection of PoE devices,Data transfer speed up to 100Mb/s, Robust metal housing protects the electronics inside and allows operation in more demanding conditions,Quiet operation thanks to passive cooling, Plug&Play no configuration required. Quiet operation, sturdy metal construction and instant installationOur device offers instant and hassle-free installation thanks to Plug &Play technology, which requires no additional configuration or specialist technical knowledge. All you need to do is follow a few simple steps. First, connect the devices to the appropriate RJ45 ports using the appropriate network cables, then connect one of the ports to your router or access modem. Ensure that the LEDs on the switch indicate activity on the ports. The durable metal housing protects the electronics, ensures durability, resistance to electromagnetic interference and effective heat dissipation, which translates into long and stable operation of the device.
• Provides wireless speeds of up to 3000Mbps(574Mbps in 2.4GHz/2401Mbps in 5GHz) • OFDMA and MU-MIMO support • Compatible with IEEE 802.11a/b/g/n/ac/ax Wave 2 wireless standards • Built-in 2 x 2 MIMO antenna • Multi-operation modes to suit different wireless applications • Provides up to 8 SSIDs to separate network traffic • High power and receiver sensitivity designed to boost your signal coverage and link speed • Supports WPA3 encryption • Weatherproof IP67-rated housing
• Up to 48 ports of full Power over Ethernet Plus (PoE+) capability • Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks • Flexible downlink options with data or PoE+ • Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps • UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure • Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems • Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access • Advanced network monitoring using Full Flexible NetFlow • Cisco Software-Defined Access (SD-Access): • Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) • Network assurance and improved resolution time through Cisco DNA Center • Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network • Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry • ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Der Digitus DN-80112-2 unmanaged Switch mit 16 Ports RJ45 Ports ist eine fortschrittliche Netzwerk-Lösung, die den anspruchsvollen Anforderungen von kleinen bis mittelgroßen Unternehmen gerecht wird. Dieser leistungsstarke Switch bietet ein nahtloses und sicheres Netzwerkerlebnis und gewährleistet zuverlässige und effiziente Datenübertragung in Ihrer Netzwerkinfrastruktur. Mit robusten Funktionen und überlegener Technologie ist der DN-80112-2 die perfekte Ergänzung für jedes moderne Netzwerk.
• Managed L2+ Web-based management • Quality of Service (QoS) support Configuring Location Settings (CLI) • Basic switching RJ-45 Ethernet ports quantity: 10 • MAC address table: 8000 entries • Access Control List (ACL) • Rack mounting • AC Power supply included
• Multi-Gigabit access switch with 12x 2.5 Gigabit Ethernet ports, 12x 1 Gigabit Ethernet ports and 4x SFP+ • Basic Layer 3 features like static routing and DHCP server • PoE support as per IEEE 802.3af/at for the efficient and centralized supply of power (370 watts) to all devices connected to it • Security through configurable access control on all ports according to IEEE 802.1X • Secure remote management through TACACS+, SSH, SSL and SNMPv3 • Cloud-managed LAN - for simple and fast configuration via the LANCOM Management Cloud • Ideal in combination with Wi-Fi 6 access points like the LX-6400 and LX-6402 • IPv6 and IPv4 support for modern enterprise networks
• PLUG AND PLAY: Simple setup with no software or configuration needed • POWER-OVER-ETHERNET: 24 PoE+ ports with 300W total power budget • STURDY METAL CASE: Small, sturdy desktop metal case and quiet operation • EASY-MONITORING: Per port LEDs for port activity and speed • GIGABIT ETHERNET: 24 auto-sensing 10/100/1000 Mbps Gigabit Ethernet ports with up to 48Gb non-blocking switching • PoE AUTO-BALANCE: unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. The switches deliver the power the device needs, at the most granular level • Limited LIFETIME WARRANTY: Next Business Day replacement and 24/7 chat with a NETGEAR expert
• Multi-Gig 10G Edge: 4 x 100M/1G/2.5G/5G/10G RJ45 and 4 x 1G/2.5G/10G SFP+ ports for flexible copper and fiber access or uplinks • High Throughput: 160 Gbps non-blocking switching capacity and 119.04 Mpps forwarding for true wire-speed on all ports • Advanced L3 Routing: Supports IPv4/IPv6 static routes, RIP v1/v2, OSPF v2 and BGP-4 for dynamic, scalable inter-VLAN and WAN routing • Granular Segmentation: Up to 4K 802.1Q VLANs with QinQ, private, voice, guest and subnet-based VLAN options for fine-grained traffic separation • Enterprise-Grade Security: 802.1X authentication, ACLs, MAC/port limiting and DoS protection to defend against unauthorized access and attacks • Service-Aware QoS: Eight hardware queues per port with SP, WRR and WDRR scheduling to prioritize voice, video and business-critical traffic • Resilient Uplinks: LACP/static link aggregation, MSTP and ERPS ring support deliver load balancing and sub-second failover • Comprehensive Management: Web GUI, console/Telnet/SSH, HTTPS/SSL, SNMP v1/v2c/v3, Syslog and FTP/TFTP for easy deployment and monitoring • Ideal For: SMB cores, high-performance workgroups and edge aggregation needing cost-effective 10G Layer 3 switching
High-Performance L2+ PoE+ Solution with Static RoutingThe IGS-4215-16P4X is PLANET's Industrial-grade, DIN-rail L2+ Managed Gigabit PoE+ Switch, upgraded with L2+ static routing to enhance inter-VLAN communication and network efficiency. It offers 16 10/100/1000BASE-T ports with 802.3at PoE+ (up to 36W per port) and 4 10GBASE-X SFP+ fiber slots for high-speed uplinks.With a total PoE power budget of 360 watts (achievable only with dual power inputs), it supports diverse PoE applications, including IP cameras and wireless access points. Operating in extreme temperatures from -40 to 75°C, the IGS-4215-16P4X features advanced PoE management, IPv6/IPv4 dual stack support, and a rugged IP30 aluminum enclosure. Its USB Type-C console port ensures simple management, making it a reliable choice for demanding industrial environments.Cybersecurity Network Solution to Minimize Security RisksThe IGS-4215-16P4X supports SSHv2 and TLSv1.3 protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, Dynamic ARP Inspection Protection, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.Modbus TCP Provides Flexible Network Connectivity for Factory AutomationThe IGS-4215-16P4X supports the Modbus TCP protocol, allowing for easy integration with SCADA systems, HMI systems, and other data acquisition systems in factory floors. This enables administrators to remotely monitor the industrial Ethernet switch's operating information, port information, communication status, and DI/DO status, thereby enhancing monitoring and maintenance of the entire factory.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe IGS-4215-16P4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.Reliable Power and High-speed Data with IEEE 802.3at PoE+ SupportThe IGS-4215-16P4X is designed to meet the needs of networks with smaller to medium PoE power demands, complying with the IEEE 802.3at PoE+ standard. It delivers a total power capacity of 360 watts across its 16 PoE+ ports, with each port supporting up to 36 watts of power. This makes it ideal for powering a range of medium-power PoE-compliant devices (PDs) over standard Cat5e/6 Ethernet cabling.The IGS-4215-16P4X is better suited for applications with multiple devices that require moderate power. It’s an excellent choice for:PoE IP camerasWireless access points (APs)IP phones and VoIP systemsDigital signage displaysIndustrial IoT devicesONVIF Support Allows Effective and Centralized Control Over IP-based Security ProductsThe IGS-4215-16P4X switch offers ONVIF support as part of its versatile feature set for seamless integration with IP surveillance cameras. Through the switch's web GUI, users can easily search for and display all ONVIF-compliant devices on their LAN.Users can also upload floor plans to the switch and place IP surveillance cameras on the plan for more intuitive planning and faster inspection in the future. Additionally, the web GUI provides real-time surveillance information, online/offline status, and the ability to remotely reboot cameras.Intelligent Powered Device Alive CheckThe IGS-4215-16P4X can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-16P4X will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing the administrator’s management burden.Scheduled Power RecyclingThe IGS-4215-16P4X allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingsUnder the global trend of energy savings and contributing to environmental protection, the IGS-4215-16P4X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you enable or disable PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.802.3at PoE+ Power and Ethernet Data Transmission Distance ExtensionIn the "Extend" operation mode, the IGS-4215-16P4X operates on a per-port basis with a 10Mbps duplex configuration. It can deliver 15-watt PoE power output over a distance of up to 250 meters, exceeding the standard 100-meter Ethernet UTP cable limit. This extended range allows PoE power to be supplied over longer distances without the need for additional cabling or electrical outlets, significantly reducing installation costs while maintaining network reliability.Effective Alarm Alert for Better ProtectionThe IGS-4215-16P4X incorporates a Fault Alarm feature that promptly notifies users of any issues with the switches. This valuable feature eliminates the need for users to spend time locating the problem, resulting in significant time and human resource savings.Digital Input and Digital Output for External AlarmThe IGS-4215-16P4X supports Digital Input and Digital Output through a terminal block located on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-4215-16P4X port shows “link down”, “link up” or “power failure”.Environmentally Hardened DesignWith the IP30 aluminum industrial case, the IGS-4215-16P4X provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 °C, the IGS-4215-16P4X can be placed in almost any difficult environment.Robust ProtectionThe IGS-4215-16P4X provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible ManagementThe IGS-4215-16P4X switch delivers high-performance transmission and advanced Layer 2 and Layer 4 functionalities, along with Layer 3 IPv4 and IPv6 static routing. This capability enables efficient routing between different VLANs and IP addresses, offering a secure, flexible, and straightforward networking solution for diverse applications.Robust Layer 2 FeaturesThe IGS-4215-16P4X can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. With dynamic port link aggregation, the switch enables the creation of a high-speed trunk. For instance, it can combine four 10G ports, creating a resilient 40Gbps connection with fail-over support. Additionally, the inclusion of Link Layer Discovery Protocol (LLDP) enhances Layer 2 functionality by providing essential information about neighboring devices within the local broadcast domain.Efficient Traffic ControlThe IGS-4215-16P4X is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.Enhancing Network SecurityPLANET IGS-4215-16P4X offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Ensuring Network IntegrityThe IGS-4215-16P4X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. Its accuracy, consistency, and reliability of data can be transmitted across a network. Moreover, it ensures that information remains unaltered during transmission and that the network itself is secure from unauthorized access or attacks.User-friendly and Secure ManagementFor efficient management, the IGS-4215-16P4X is equipped with Command line, Web and SNMP management interfaces.With the built-in Web-based management interface, the IGS-4215-16P4X offers an easy-to-use, platform-independent management and configuration facility.For text-based command line management, it can be accessed via Telnet, SSH and the console port.By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.Moreover, the IGS-4215-16P4X offers secure remote management by supporting SSHv2, TLSv1.3 and SNMPv3 connections which encrypt the packet content at each session.Flexible Long-distance Extension SolutionThe emergence of 10G Ethernet marks a significant advancement in Ethernet technology. The IGS-4215-16P4X is a powerful networking device that offers four 10G SFP+ slots capable of supporting three different speeds. These slots can operate at 10GBASE-SR/LR or 100M/1G/2.5GBASE-SX/LX backwards, providing administrators with flexibility in choosing the most suitable SFP/SFP+ transceiver based on the required transmission distance and speed. With ample bandwidth and robust processing capacity, the IGS-4215-16P4X provides an efficient solution for administrators seeking to enhance their network infrastructure.Intelligent SFP Diagnosis MechanismThe IGS-4215-16P4X supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Remote Management SolutionPLANET's Universal Network Management System (UNI-NMS) and CloudViewerPro app provide robust support for IT staff in effectively managing and monitoring all network devices, including the IGS-4215-16P4X, from remote locations. Tailored for deployment in both enterprises and industries where the IGS-4215-16P4X is utilized remotely, these systems enable the identification of bugs or faulty conditions without the need for on-site visits. With UNI-NMS or the CloudViewerPro app, businesses of all types can now be swiftly and efficiently managed through a unified platform, streamlining operational oversight.
Enterprise-grade 24-port, Layer 3 Etherlighting™ PoE+++ switch with high-capacity 10 GbE RJ45 and 25G SFP28 connections for high availability system design.
GS1100 Switchable SeriesThe Zyxel GS1100 Switchable Series is designed for SB or SMB markets, offering instant Gigabit connectivity and plug-and-play simplicity. With "Simplicity" design in mind, these switches feature intuitive DIP switches, allowing users to toggle settings for handy features with just a single touch. Instant Gigabit speeds with easy plug-and-play Intuitive DIP switches toggle convenient features in seconds Slim, space-saving design for desks, walls, and tight server cabinets Energy-efficient and fanless for silent, eco-friendly networking
Die PCI Express Karte von Delock bietet zwei Netzwerkanschlüsse mit einer Übertragungsrate von bis zu 1000 Mbit/s. Die PCIe > 2 x Gigabit LAN Karte unterstützt Wake On LAN (WOL), 9k Jumbo Frames und PXE.
• Enables related Omada and Festa wall plate APs to be installed directly on bare walls, bringing lower pre-deployment costs and complexity* • Ideal for installations without a reserved junction box, incompatible box sizes, or where network cables are not pre-installed in the wall
