QuSpot for Teltonika RUTX09 Integrated outdoor multi band LTE omni antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX09 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded GPS antenna. If you use RUTX09 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
The Liebert IntelliSlot Unity Communications interface card provides access to Trellis, LIFE Services and Liebert Nform as well as access to the Web, data from environmental sensors and external client protocols for Vertiv devices. The cards use Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications.
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Nailonpunutisega - Kullatud pistikud ja metallist korpus - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: antratsiit - Pikkus koos pistikutega: ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
PULSAR SF116 võrgukommutaator on hallatav Fast Ethernet (10/100) seade, mis võimaldab tõhusat võrgu haldamist ja voolu jaotamist üle Etherneti. See kompaktne 1U lüliti sobib ideaalselt ettevõtetele ja võrguadministraatoritele, kes soovivad optimeerida oma võrguinfrastruktuuri minimaalsete häiretega. Tänu Power over Ethernet (PoE) võimekusele võimaldab see edastada nii andmeid kui ka toitu ühe võrgukaabli kaudu PoE-ühilduvatele seadmetele, nagu IP-kaamerad, VoIP-telefonid ja traadita juurdepääsupunktid, lihtsustades oluliselt võrgu paigaldamist, vähendades vajadust täiendavate toiteallikate järele. PULSAR SF116 on elegantses mustas korpuses, mis sulandub sujuvalt olemasolevate IT-seadmetega. Tänu ruumikindlale 1U disainile sobib see ideaalselt riiulisse paigaldamiseks, mis säästab väärtuslikku ruumi võrgukappides. Tänu täiustatud haldusfunktsioonidele saavad kasutajad kontrollida võrguliiklust, suurendada turvalisust ja parandada jõudlust, pakkudes usaldusväärset ja skaleeritavat võrgukeskkonda. See kommutaator on suurepärane valik väikestele ja keskmise suurusega ettevõtetele, kes otsivad kuluefektiivset, kuid samas võimsat võrgu laiendamise ja haldamise lahendust.
IEEE 802.3ab Gigabit and 802.3af PoE compliant Gigabit Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.) 1 x 10/100/1000Mbps Auto-MDIX Data In port 1 x 10/100/1000Mbps PoE Auto-MDIX Data Out port Power port Power LED indicator Supplies power up to 15.4 Watts Easily install a PoE device where a power outlet is not available Reduce installation and network equipment costs Safeguards network devices with short circuit protection Plug and Play in remote location Light weight and compact size Wall mounting points
Larger cable diameter in accordance with the enhanced EU-standard of 2010!- Standard extension socket in attractive colours and of exceptional quality.- The well positioned sockets enable you to connect angular plugs.- Illuminated 2-pole ON/OFF safety switch.- With childproof sockets.Kaabli pikkus1,5 mToote värvValgeKaabli värvValgeAC-väljundite arv6 vahelduvvoolu kontakt
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
SAVIO CL-43 Wifi 802.11/n USB 150Mbps adapter The adapter acts as an external network card - allowing you to get Wi-Fi on computers that do not have a built-in Wi-Fi card. Main features: Compatibility with standards: IEEE 802.11b, IEEE802.11g, IEEE802.11n Intelligent Energy Saver B49 Chip: Realtek RTL8188CU Supports 64/128-bit WEP, WPA, WPA2 and WPS Power consumption: < 1.5 W Interface: USB Support for operating systems: Windows 2000, XP, Vista, Windows 7, Linux Software CD included Packaging: blister pack
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
