Võrguseadmed

LANBERG LAN cable UFTP cat.6A 305m solid

GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

LHG XL 5 ac // RBLHGG-5acD-XL | IEEE 802.11a | Antenna Gain 27 dB | Dimensions Ø 550 x 245 mm

Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e UTP (unshielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall

Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: Red

USW-Flex-UtilityFlex Switch Adapter Kit for Street Light Pole Applications.The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security. Note: UniFi Switch Flex, USW-Flex, sold separately

D-Link AX1500 4G Smart Router G415/E 802.11ax, 1500 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 3, Antenna type External

AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)

16-port 10/100M Switch, 1U 19-inch rack-mountable steel case

Technical specifications: Eight ;10/100/1000 Mbps Gigabit ports16 Gbps switching fabricAuto MDI/MDIX crossover for all portsSecure store-and-forward switching schemeFull/half-duplex for Ethernet/Fast Ethernet speedsIEEE 802.3x Flow ControlSupports IEEE 802.1p QoS (4 Queues, Strict Mode)Plug-and-play installation

1000Base-BX WDM Bi-Directional SFP Module, LC connector, TX:1550nm/RX:1310nm,

Antenna gain: 6 Weight: 453

Deco X50-PoE Home Wi-Fi 6 Mesh AX3000 system with PoE Dual-band WiFi AX3000 - 2402 Mb/s in the 5 GHz band and 574 Mb/s in the 2.4 GHz band. Many mounting options - Place Deco on the table, mount it on the ceiling or wall using mounting accessories. PoE support - Power over Ethernet technology simplifies the deployment of devices in the network. Wired Multi-Gig 2.5 Gb/s network - 1 2.5 Gb/s port and 1 Gigabit port. AI-powered mesh network - The device intelligently learns your network environment to provide you with a Wi-Fi connection that perfectly adapts to your home. TP-Link HomeShield - Comprehensive network protection, effective parental control and real-time protection of IoT devices. Universal Compatibility - Backwards compatible with all generations of Wi-Fi and works with any Internet Service Provider (ISP) and modem. Configuration is easier than ever before - The Deco app will guide you step by step through the entire configuration process. Many assembly possibilities Place your Deco wherever you want The flexible installation options of Deco X50-PoE will prove useful in many different situations. You can place them on a desk or mount them on the wall or ceiling using the included mounting kits. Perfect for non-stop entertainment Powered by Wi-Fi 6 technology, the home Wi-Fi system is designed to provide more comprehensive home coverage, faster speeds and higher performance. Experience the power of the latest Wi-Fi Mesh technology by connecting more devices and transferring data faster than ever before. Let the network of the future come to your home now. Powerful dual-band WiFi AX3000 The latest 1024-QAM technology increases speeds to 3.0 Gb/s. Such fast connections are ideal for bandwidth-intensive activities like cloud gaming or streaming 8K movies. The family will be able to enjoy flawless streaming of content with crystal clear image and sound, without any buffering. Multi-Gig 2.5Gb/s PoE port Equipped with a 2.5Gb/s Ethernet port, Deco X50-PoE delivers outstanding multi-gigabit performance to support the needs of increasingly faster WiFi. By exceeding the port limits of 1Gb/s, it brings peak performance to your devices. Using the 2.5 Gbps Ethernet port, you can enjoy incredibly fast connections. Power over Ethernet, simple implementation of devices into the network Deco X50-PoE is designed to use a single Ethernet cable to exchange data and power. It can also be powered by an external power supply (the power supply is included). Hassle-free - Simple installation and efficient implementation, without the need to call an electrician. Cost-effective - No additional cables or power supplies required. It allows you to reduce infrastructure costs. Flexible - More placement options for deployment in extended environments. Bring Wi-Fi coverage to every part of your home Deco units work together as a powerful mesh to reach every corner of your home with signals. Need even more coverage? Just add another Deco. All Deco TP-Link can work together. Built for multiple devices Deco products are aimed at significantly increasing network capacity and performance in high data traffic environments. No matter how many screens or devices are connected to the network at the same time, everyone can benefit from an efficient network that loads data faster and does not reduce performance. Intelligent network for Smart Home Deco uses its built-in algorithms to automate connections on your network, thus ensuring the strongest signal at all times. Seamless roaming under one Wi-Fi name TP-Link Mesh means that Deco units work together to create a unified network. Your phone or tablet will automatically connect to the fastest Deco while you move around the house. Thanks to this, Deco creates fully smoothly operating Wi-Fi. Whole-Home Coverage - Eliminates areas of weak signal throughout your home Smart Roaming - Uninterrupted streaming while moving between rooms One WiFi Name - Forget about switching between WiFi networks Unified management - Manage your home WiFi with the Deco app Compact design Easy assembly Remarkable performance combined with a compact design ensures easy WiFi configuration while saving space. The elegant appearance and delicate casing make Deco X50-PoE fit perfectly into many different interior designs. Simple to configure, but with great possibilities Configure and manage your network anytime, anywhere with the user-friendly TP-Link Deco app. In just three simple steps, your home can be covered with a strong and stable WiFi network. Easy to manage With the Deco application you can manage your network from home or remotely. The application allows, among other things, verification. Voice control Pair the Deco X50-PoE unit with Alexa or Google Assistant and control the device with simple voice commands. Cooperation with all Deco units Deco X50-PoE can create a mesh network with any other Deco model. To increase the range of the network, simply add another Deco unit to it.

Access Point Wi-Fi standards 802.11b/g/n/ac, Antenna type Internal, 2.4-5 GHz, Wi-Fi, Yes

Ubiquiti switch UACC-CM-RJ45-MG network transceiver module Copper 10000 Mbit/s SFP+

Ubiquiti UniFi Switch USW-Pro-Max-48-POE PoE++

Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!

The TP-Link Omada SG3210X-M2 V1 is a versatile and powerful switch designed to meet the demands of modern networks. With its 8 2.5GBase-T ports and 2 10GBase-X SFP+ ports, it offers ample connectivity for devices requiring high-speed data transfer. Security is a priority, featuring robust protocols such as RADIUS, SSH, and TACACS+, along with 802.1x authentication and ACL support to protect against unauthorized access and attacks.Advanced network management capabilities allow for comprehensive control and monitoring, ensuring efficient traffic management and easy troubleshooting. The switch's fanless design ensures silent operation, making it an ideal choice for any office or data center. Additionally, its energy-efficient features not only reduce operational costs but also contribute to a greener environment. Whether for a small business or a large enterprise, the TP-Link Omada SG3210X-M2 V1 is engineered to provide reliable, secure, and high-performance networking solutions.

TRB245Small and durable industrial LTE Cat 4 Gateway equipped with a number of Input/Output Serial Ethernet ports. Number of features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial LTE Cat 4 Gateway TRB245 is equipped with GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features for an industry in one package: secure power connector I/O ports serial communication fast and reliable internet connection. TRB245 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of software features such as SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises.

MikroTik RouterBOARD RB5009UPr+S+IN No Wi-Fi, Router Switch, Rack Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 7, Mesh Support No, MU-MiMO No, No mobile broadband, SFP+ ports quantity 1

The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.

Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.

Xiaomi Dual-Band Wireless Wi-Fi 6 Router AX3200 802.11ax, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 3, MU-MiMO Yes, Antenna type External

SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design

A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages 512 MB of RAM 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall NAT and even some VPN.Like many other MikroTik switches CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS. The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport! But make no mistake – this small switch has all the power and features of its bigger rackmount analogue – the CRS326-24G-2S+RM nothing has been removed!CRS326-24G-2S+IN provides all the basic functionality for a managed switch and even more: port-to- port forwarding MAC filtering VLAN configuration traffic mirroring bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.

UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability.

AUTO SWITCH Ideaalne sõidukisiseste lahenduste jaoks   POE+ 4 x PoE+ porti 802.3af ja 802.3at toega   GIGABIT ETHERNET 5 x Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s   TÖÖSTUSLIK DISAIN Vastupidav alumiiniumist korpus   MADAL SISENDPINGE 9-30 V toitepiirkond PoE jaoks   PLUG-N-PLAY Ei vaja konfigureerimist   TSW101 on Teltonika Networks'i esimene autodele pühendatud haldamata kommutaator.   Varustatud viie Gigabit Ethernet pordiga, millest neli toetavad IEEE802.3af ja IEEE802.3at PoE+ standardeid.   Lai valik toetatud toitepingeid (9-30 VDC) ja kompaktsed mõõtmed võimaldavad seda sobitada paljudesse sõidukite rakendustesse.   See seade, mis on liigitatud toiteallikaseadmeks (PSE), võimaldab tsentraliseerida toiteallikaid, pakkudes kuni 30 vatti ühe pordi kohta ja maksimaalset väljundvõimsust 60 vatti.   10/100/1000 Mbit/s Ethernet-portid lihtsate, suure ribalaiusega lahenduste jaoks.   Ideaalne nii sõidukisisese toite kui ka Ethernet-andmesideühenduse samaaegseks pakkumiseks.

CRS106-1C-5S The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power. Low price of this product provides a market leading solution for connecting up to six SFP devices. Switching resultsCRS106-1C-5S ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput10,416.75,333.31,644.76,736.8568.96,909.0SwitchingNon blocking Layer 2 capacity10,416.710,666.71,644.713,473.7568.913,817.9SwitchingNon blocking Layer 1 throughput10,416.77,000.01,644.77,000.0568.97,000.0SwitchingNon blocking Layer 1 capacity10,416.714,000.01,644.714,000.0568.914,000.0   

Throughput: 160 Forwarding rate: 119.04 MAC address table size: 32 Jumbo frame size: 9 Number of VLAN groups: 4000 Power consumption: 15.46

This powerful and affordable router crushes all previous CCR models in single-core performance.Like the other models in CCR2004 series this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1 7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example.The new router has 18 wired ports including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel.Like all CCR devices it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included so you have one less thing to worry about. And of course there is active cooling to keep things nice and cool.Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.

AX3000 Ceiling Mount WiFi 6 Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160. - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both 802.3at PoE+ and DC (DC adapter sold separately) power supply for flexible installations. - Ultra-Slim Design: Φ160 mm × 33.6 mm elegant design brings more agility. EAP653 Type Wireless Access Point, Data transmission speed 2976 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4GHz/5GHz Dimensions 160 × 160 × 33.6 mm

The ASUS WL-Router RT-AX52 AX1800 AiMesh is a cutting-edge wireless router designed to provide superior internet connectivity. With dimensions of 254mm in depth, 255mm in width, and a height of 55mm, it is compact yet powerful, weighing just 0.69kg. This router supports Ethernet LAN data rates of 10/100/1000, making it suitable for a wide range of internet speeds, and it comes equipped with 3 RJ45 connections for wired devices. It operates on the 802.11ax wireless frequency range, ensuring fast and reliable connections, and features AiMesh support, allowing for the creation of a flexible, whole-home WiFi system. Additionally, it comes with a 36-month warranty, ensuring peace of mind and reliable performance.

LTE-Advanced Mobile WiFi 4G LTE supported with up to 150Mbps download and 50Mbps upload speeds Supports up to 15 devices simultaneously All useful information at a glance with screen display 2550mAh battery for up to 10 hours of working Selectable 2.4GHz or 5GHz dual band WiFi Equipped with a micro SD card slot for up to 32GB of optional storage

2.4GHz, 16.3x8x3cm, 8dBi antenna, AirOS, POE-RJ-45 Connector.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 8dBi dual-polarity gain at 2GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Outdoor Home Security Wi-Fi Camera is a great choice for protecting your property

AX5400 Dual-Band Gigabit Wi-Fi 6 Router. - Gigabit WiFi for 8K Streaming – 5400 Mbps WiFi for faster browsing, streamings, and downloading, all at the same time. - Fully Featured Wi-Fi 6 – Equips with the top structure of 4T4R and HE160 on the 5 GHz band to enable a 4.8 Gbps ultra-fast connection. - Connect 100+ Devices§ – Supports MU-MIMO and OFDMA to reduce congestion and quadruple the average throughput.‡** - Extensive Coverage – 6× antennas and Beamforming ensure broad coverage. - HomeShield – TP-Link's premium security services keep your home network safe with cutting-edge features for network and IoT protection.* - More Vents, Less Heat – Improved vents area unleashes the full power of the whole machine. - USB Sharing – 1× USB 3.0 port enables easy media sharing and private cloud building. - Easy Setup – Set up the router in minutes with the Tether app.

Function switch, Type standalone, rackmount (via mounting bracket), Network connections 8x RJ-45, 2x SFP +, Speeds 8x RJ-45 (10/100 / 1000Base-T), 2x SFP + (10Gb / s), PoE 1x RJ-45 PoE PD, Backplane 56Gb / s, 41Mp / s, Officially supported standards 802.3af, Configuration of the web interface, Passive cooling, Dimensions (WxHxD) 200x46x167mm, 1U,

The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

ASUS USB-BT400 - network adapter. External Interface (Bus) Type USB 2.0 Dimensions (WxDxH) 1.947 cm x 1.6 cm x 0.81 cm Weight 2.2 g Data Link Protocol Bluetooth 4.0 Data Transfer Rate 3 Mbps Frequency Band 2.4 GHz

LINKSYS LGS108P Unmanaged Switch PoE 8p

1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).