Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Long-range outdoor CPEs with modern Wi-Fi 6 performance, rugged design, and unbeatable pricing. Available in two models (24.5 or 27 dBi), they’re ideal for point-to-point links over great distances. This is the 24.5 dBi version. Need a fast, stable connection across large distances? Whether you’re bridging two buildings, connecting a remote site, or sharing your internet with nearby infrastructure — the new LHG Wi-Fi 6 series is built for the challenge. And here’s the best part: we’ve kept the same pricing as the previous generation. High performance, long range, and Wi-Fi 6 — all without breaking the budget. The 802.11ax standard brings crucial improvements for long-distance wireless links — including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking. Order yours today — and be ready too! LHG 5 ax is compact, long-range CPE with a 24.5 dBi antenna. Perfect for links up to 20 km in most scenarios. Check related devices below for the XL version if you need a longer distance!
PoE ports 8 | PoE power budget 60 Watts | Operating temperature range -10 °C ... 55 °C | Dimensions 184.6 x 103.3 x 27.0 mm | Product Net Weight 0.36 kgGarantii: 36 kuud
4G and Wi‑Fi 6 connectivity The industrial Teltonika RUTC41 router combines mobile 4G LTE Cat 4 with dual-band Wi‑Fi 6, making it ideal where stable network access and fast handling of many devices matter. Maximum WLAN speed of up to 2402 Mb/s on the 5 GHz band supports smooth operation of office systems, IoT devices and industrial installations. Key advantages >4G LTE Cat 4 – provides a mobile network connection in locations without fixed wired internet. >Dual-band Wi‑Fi 6 – supports a larger number of devices with better wireless network stability. >2402 Mb/s on 5 GHz – reduces data transfer time and improves network usability. >Docker – enables containerised applications to run without an additional computer. >1 GB RAM and 1.3 GHz dual-core processor – maintain smooth operation during demanding tasks. >Automatic SIM switching – maintains connectivity continuity if there are problems with one card or the operator’s network. Edge performance The combination of 1 GB RAM and a 1.3 GHz processor provides enough power for local data processing, event logging and edge services. This configuration reduces the need to move some tasks to an external server, which speeds up system response and simplifies deployment in the field. Docker and RutOS The router runs on RutOS and supports Docker, so you can run your own services without expanding the installation with a separate industrial computer. This is a convenient solution for deployments where quick configuration, remote management and the ability to expand the device’s functions as project needs grow are important. Stable local network The model offers 5 Gigabit Ethernet RJ-45 ports and Ethernet WAN support, making it easier to build a wired infrastructure for cameras, terminals, controllers and access points. In addition, support for QoS, load balancing, DHCP and static routes organises network traffic and keeps services operating predictably. Connection security RUTC41 supports a firewall, DMZ, MAC and IP address filtering, and protection against DDoS, increasing control over traffic in the company network. Authentication mechanisms are also available, such as digital certificates, X.509, TACACS+ and Radius, making the device better suited to environments with higher security requirements. Operation in harsh conditions The industrial router operates in temperatures from -40 to 75°C and humidity of 10-90%, so it is suitable for use in control cabinets, warehouses and technical facilities. The black housing and external SMA antennas make installation easier and help adapt coverage to the installation conditions.
Teltonika OTD144 Outdoor Wi-Fi Router Teltonika OTD144 Outdoor Wi-Fi Router is a functional outdoor router designed to provide stable wireless and wired network access in harsh environmental conditions. The device combines LTE Cat 4 mobile connectivity with a Wi-Fi access point, enabling efficient distribution of the internet signal in open spaces and industrial facilities. The product is a suitable solution for video surveillance systems, urban infrastructure and telemetry data collection points, ensuring continuous data transmission in places without traditional cable connections. Hardware design, PoE power standards and IP55 resistance The router’s design is based on components enclosed in a sealed plastic housing with an IP55 protection rating, which guarantees resistance to weather conditions such as rain, dust and changing temperatures. The Teltonika OTD144 model has been equipped with two Ethernet ports, one of which supports PoE-in (power input), and the other PoE-out (power output). This technical solution allows data and power to be transmitted via a single structured cable, as well as direct power supply to another peripheral device, for example an external IP camera. Reliable mobile transmission thanks to Dual SIM Auto Failover Efficient network continuity is provided by the built-in LTE Cat 4 modem working with the Dual SIM system. The Auto Failover function allows two SIM cards from different mobile operators to be installed, protecting the infrastructure against sudden loss of connectivity in the event of a main network failure or a drop in radio signal strength. The router automatically switches traffic to the backup SIM card, which is very useful in unattended field installations where constant data transmission access is critical. Management via the RutOS operating system and integration with RMS The device operates under the control of the stable RutOS operating system, based on the OpenWRT Linux distribution, which provides extensive network configuration options and optimal data packet management. This software supports the creation of secure VPN tunnels, advanced firewall rules and Hotspot functions. Full compatibility with the Remote Management System (RMS) cloud platform enables administrators to remotely monitor signal parameters, change settings and carry out hardware diagnostics without the need to be physically present at the installation site. Simple field installation and advanced security features The Teltonika OTD144 router features an integrated mounting bracket, which simplifies and shortens the installation process on masts or building walls. The security of transmitted information in the wireless structure is protected by current Wi-Fi encryption standards. The device allows logical separation of user traffic by creating isolated subnets, which increases data protection and makes it easier to deploy secure public access points in urban spaces. Technical data Parameter Value Brand Teltonika Model OTD144 Device type Outdoor mobile router (Outdoor Router) Mobile technology LTE Cat 4 (up to 150 Mb/s) SIM card support Dual SIM with Auto Failover function Wireless connectivity Wi-Fi (with Hotspot function) Wired interfaces 2 x Ethernet RJ45 (1 x PoE-in, 1 x PoE-out) Operating system RutOS (based on OpenWRT Linux) Security Firewall, VPN (OpenVPN, IPsec), Wi-Fi encryption Enclosure protection rating IP55 (weather resistance) Remote management Compatible with Teltonika Remote Management System (RMS) Key advantages IP55 weather resistance: The robust housing structure protects the components from rain, dust and external factors. Dual SIM technology: The Auto Failover mechanism automatically switches the connection to the backup card in the event of a network failure. PoE power and distribution: PoE-in support simplifies cabling, while the PoE-out port allows additional peripheral devices to be powered. RutOS software: The operating system provides advanced routing, Firewall configuration and VPN security features. Integrated bracket: The factory mounting design makes it easier to install the equipment securely in the intended location. The product is a proposal for Installers of outdoor IP surveillance systems looking for a stable router with the ability to power cameras via PoE-out. Administrators of urban and industrial networks who need an efficient Wi-Fi access point for use in open spaces. Companies carrying out telemetry and industrial automation projects that require a stable LTE connection in harsh environmental conditions.
Nutikas 5G-ühendus Teltonika RUT276 RedCap 5G-ruuter on järgmise põlvkonna ühenduslahendus, mis on loodud selleks, et tuua 5G-tehnoloogia kõige väärtuslikumad eelised tööstuslikesse ja IoT-rakendustesse, ilma täismahulise 5G-riistvara kulude ja keerukuseta. RedCap (Reduced Capability) arhitektuuril põhinev seade on optimeeritud rakenduste jaoks, mis nõuavad 4G-st suuremat läbilaskevõimet ja väiksemat viivitust, säilitades samal ajal tõhususe ja taskukohasuse. Seade saavutab 5G Sub-6GHz iseseisvates võrkudes allalaadimiskiiruse kuni 223 Mbps ja üleslaadimiskiiruse kuni 123 Mbps, tagades kiire ja reageeriva andmeedastuse kaasaegsetele ühendatud süsteemidele. Erinevates võrgukeskkondades töökindluse tagamiseks toetab ruuter ka 4G LTE Cat 4 varuvõimalust, pakkudes kuni 195 Mbps allalaadimis- ja 105 Mbps üleslaadimiskiirust, kui 5G pole kättesaadav. Lisaks tagab integreeritud kahe SIM-kaardi funktsioon koos automaatse varuvõimalusega katkematu ühenduse, lülitudes signaali kadumise või võrgu halvenemise korral sujuvalt ühe operaatori vahel teisele. RUT276 pakub ka mitmekülgset traadita ühenduvust standardiga IEEE 802.11b/g/n (Wi-Fi 4), toetades mitmeid töörežiime, sealhulgas juurdepääsupunkti (AP), klienti (STA), võrgustikku (802.11s) ja mitme juurdepääsupunkti (Multi-AP) režiimi. Need režiimid võimaldavad paindlikke kasutusvõimalusi, alates eraldiseisvatest seadmetest kuni hajutatud traadita infrastruktuurideni. Täiustatud traadita optimeerimistehnoloogiad, nagu kiire rändlus (802.11r), raadioressursside mõõtmine (802.11k) ja BSS-ülemineku haldus (802.11v), tagavad stabiilse jõudluse dünaamilistes keskkondades liikuvate klientidega. Toetades kuni 50 samaaegset traadita ühendust ning pakkudes selliseid funktsioone nagu kliendi isoleerimine, SSID peitmine ja MAC-põhine juurdepääsukontroll, pakub RUT276 nii skaleeritavust kui ka kontrolli, mis teeb sellest ideaalse valiku professionaalseteks IoT- ja tööstusvõrgustiku rakendusteks. Suurepärane integreeritavus Teltonika RUT276 on spetsiaalselt loodud toimima usaldusväärse sidepõhina tööstus- ja masinatevahelistes (M2M) keskkondades, kus koostalitlusvõime ja protokollide ühilduvus on üliolulised. Selle ruuteri peamine eelis on integreeritud RS232 ja RS485 jadaliidesed, mis võimaldavad otsest suhtlust mitmesuguste tööstusseadmetega, nagu PLC-d, andurid, SCADA-süsteemid ja vanemad masinad. RS485-liides töötab pooldupleksrežiimis (2-juhtmeline), tagades tõhusa andmevahetuse tüüpilistes tööstuslikes bussikonfiguratsioonides. Need jadaliidesed toetavad laia valikut töörežiime, sealhulgas Serial over IP, mis võimaldab juurdepääsu vanematele jadaseadmetele kaasaegsete IP-võrkude kaudu. Lisafunktsioonid hõlmavad MODBUS-värava võimalusi tööstusautomaatikaks, konsooli juurdepääsu seadmete haldamiseks, modemi emulatsiooni ja NTRIP-kliendi tuge täppispositsioneerimise rakendustele. Võrgu konfigureerimine ja haldamine on paindlik, toetades nii pordipõhiseid kui ka sildipõhiseid VLAN-e, mis võimaldab võrguliiklust turvaliselt ja selgelt eraldada. Integreeritud DHCP-server toetab staatilist ja dünaamilist IP-aadresside jaotamist, edastamisfunktsiooni ja täiustatud rendihaldust koos wildcard-MAC-aadressidega. Administraatorid saavad seadme porte täielikult kontrollida, jälgides nende staatust, reguleerides edastusparameetreid ning aktiveerides või deaktiveerides liideseid vastavalt vajadusele. Turvalisust tugevdab võimas tsoonipõhine tulemüür, mis toetab IPv4 ja IPv6, jälgib aktiivseid ühendusi, filtreerib liiklust määratud reeglite alusel ning võimaldab DMZ-i seadistamist. Autentimise valikud hõlmavad eelnevalt jagatud võtmeid, X.509 digitaalsertifikaate, TACACS+ ning nii sisemisi kui ka väliseid RADIUS-servereid, tagades ettevõttetasemel juurdepääsukontrolli. OpenVPN võimaldab mitmel kliendil ja serveril töötada samaaegselt kuni 27 krüpteerimisvalikuga, samas kui QoS ja Smart Queue Management aitavad tähtsat andmeliiklust prioriseerida. Vastupidav konstruktsioon RUT276 on loodud töötama usaldusväärselt nõudlikes tööstuskeskkondades, ühendades endas kompaktse vormi ja vastupidava alumiiniumkorpuse, mis tagab pika kasutusaja, hea soojuse hajumise ja vastupidavuse mehaanilisele koormusele. Seadme konstruktsioon võimaldab mitmesuguseid paigaldusvõimalusi, sealhulgas DIN-siinile, seinale ja tasasele pinnale. Ruuter on konstrueeritud stabiilseks tööks muutuvates toiteoludes, toetades laia sisendpinge vahemikku 9–57 VDC. Integreeritud kaitsemehhanismid hõlmavad vastupooluse kaitset ja üle 58 V (10 µs) pingetõusu kaitset, mis kaitsevad seadet elektriliste häirete eest. Lisaks standardse 2-pinilisele tööstuslikule DC-pistikule toetab RUT276 nii aktiivset PoE-d (802.3af klass 0) LAN-porti kaudu kui ka passiivset PoE-d (16–57 VDC). Hoolimata oma arenenud võimekusest on seade äärmiselt energiatõhus, tarbides ooterežiimis alla 2 W ja tippkoormusel alla 3,5 W, mis teeb selle sobivaks energiatõhusust hindavatesse rakendustesse. Sees töötab ruuter Mediatek 580 MHz MIPS 24KEc protsessoriga, millele on lisatud 128 MB DDR2 RAM-mälu ja 32 MB SPI-välkmälu, tagades stabiilse ja kiire süsteemi jõudluse. RUT276 töötab OpenWrt-põhise Linuxi operatsioonisüsteemi RutOS-i alusel ja pakub laialdasi konfiguratsiooni- ja kohandamisvõimalusi. Haldamine on võimalik veebiliidese (HTTP/HTTPS) ja käsurealiidese (CLI) kaudu ning kaugfirmware'i uuendused FOTA kaudu, sealhulgas automaatsed uuendusteated. Laienemisvõimalusi toetab Micro SD-kaardi pesa (kuni 2 TB), mis võimaldab mälu laiendamist, failide jagamist (Samba) ja DLNA-teenuseid.
Dell Adapter - USB 3 to Ethernet Type Adapter Interface SuperSpeed USB 3.0 to Gigabit Ethernet x 1 Color Black Dimensions 2.03 cm x 15.2 cm x 1.52 cm (WxDxH) Communication interface Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Protocols 10Mb LAN, 100Mb LAN, GigE Warranty Terms 1 year warranty
RBFTC11 is Fiber to Copper converter. Unlike many other media converters available on market, RBFTC11 has outdoor waterproof case with lock screw. Unit has 12-57V PoE with 802.3af/at support. Comes with PoE injector and power supply.
5-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc 5 10/100Mbps RJ45 ports With four PoE ports, transfers data and power on one single cable Working with IEEE 802.3af compliant PDs, expands home and office network Supports PoE Power up to 15.4W for each PoE port Supports PoE Power up to 58W for all PoE ports Requires no configuration and installation
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e UTP (unshielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
The Lanberg NC-1000-01 is a versatile SuperSpeed USB cable that functions as an external network adapter. This compact device, with a length of 15 cm, connects easily using a single RJ-45 connector. Designed to support a range of data link protocols including Gigabit Ethernet, Fast Ethernet, and standard Ethernet, it ensures reliable wired connectivity. The adapter is USB-powered, making it simple to use without needing an external power source, further enhancing its portability. With integrated Wake On LAN (WOL) functionality and support for full duplex and half duplex modes, this network adapter meets various networking needs while providing performance in data transfer.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
R1200 AC1200 Dual Band Smart WiFi Router AC1200 Dual Band WiFi Router 5dBi high gain antennas for large house coverage Built-in Firewall will protect your home network The guest network will protect your privacy Support VPN Clients: PPTP/L2TP/OpenVPN/WireGuard IPv6 compatible Easily encrypt your wireless security with the push of a WPS button
